Instructions for Use
BioMetrixx WT 100 S – Solar Vole Repeller
Repels pesky rodents with the power of the sun!
Dear Client,
Congratulations for choosing one of our quality products. Please follow these instructions carefully and keep them
with you.
Get rid of rodents with vibrations and solar power!
1. Product description
This vole repeller device is one of the new generation of repellers! It generates quartz vibrations in approx. 20 sec
intervals within a frequency range of 400 Hz ± 50 Hz. Outdoor test showed that these specially generated vibrations
have an optimum effective area of approx. 650 m², depending on condition of soil. Since rodents cannot stand these
quartz vibrations they move to other areas within a few days. Other useful animals are not harmed. The Solar Vole
Repeller can be used in the garden, in the field or in other outdoor areas with unwanted rodents. The finely tuned
electronic components and the efficient solar modules guarantee constant function even with poor light. This
appliance not only repels voles, but also moles!
2. Installation and maintenance
Dig the earthpick of the device about 80% into the ground. To turn it on, press the button at the bottom of the casing.
Your Solar Vole Repeller is now ready for operation. Check the function of the device regularly. In case it does not
work normally any more, a replacement of the rechargeable batteries might be necessary (see point 3).
3. Replacement of the rechargeable batteries
1. Unscrew the 6 screws and remove the transparent housing cover.
2. Carefully take off the solar panel with the Styrofoam pad from the rechargeable batteries which are underneath.
When doing so, make sure that cable connections between the solar panel, the circuit board and the frequency
emitter which is underneath the rechargeable batteries are not damaged.
3. Remove the old rechargeable batteries from their fittings.
4. Insert a set of new rechargeable batteries size Mignon (AA) and type Ni-MH with 1.2 V and 600 mA. When doing
so, mind the correct polarity.
5. Carefully place the solar panel and the Styrofoam pad back on the rechargeable battery.
6. Reattach the transparent casing cover and fix it by screwing in the 6 screws in their original positions.
4. Technical data
Power supply: 2 rechargeable batteries, size Mignon (AA), type Ni-MH, 1.2 V, 600 mA
Casing: weather-proof
Area of efficiency: approx. 650 m², depending on condition of soil
Frequency range: 400 Hz ± 50 Hz, self-controlling
Operation: On / Off switch
Electricity supply: Mono-crystal Solar Panel
Interval: approx. 1 sec on, approx. 20 sec off (break interval)
Voltage reserve: up to 4 days without exposure to light
Readiness for operation: immediate operating and charging function, even at low incidence of light
5. Attention: Important battery notice
• Instructions for battery disposal:
Batteries are subject to legal provisions. After use they must therefore be returned to the point of sale or to a
collecting point of public facilities for harmful substances. Batteries may never be disposed as household waste,
in the yellow sack or other. Dispose of batteries only when completely discharged into a waste batteries
collecting container and take precautions against short circuit (eg by masking the poles).
Article No. 19001
(included); can be replaced if necessary
6. Safety instructions
Important: Damage caused by not adhering to the operating instructions is not covered by guarantee. BioMetrixx
accepts no liability whatsoever for any resulting consequent damages.
- Only operate the device at its intended voltage.
- In case of repairs, only use original spare parts, to avoid serious damage.
- Repairs or other works, e.g. changing a fuse, etc. may only be carried out by an appropriately trained, skilled
person.
- It must be noted that operator or connecting errors lie outside the influence of BioMetrixx and we cannot accept
any liability for resulting damages.
- Always check whether the device is suitable for the respective place where you intend using it.
7. General information
1. Electric appliances, packaging material etc. should be kept away from children.
2. Dispose packaging and worn out material correctly and in an environmentally friendly way.
3. Do only pass on the device including the operation manual.
4. Subject to change of design and technical data without notice for the sake of constant product improvement.
8. Guarantee
We grant a two year guarantee for this device. Guarantee includes repair of all defects that were not caused by
defective material or fabrication mistakes. Guarantee does not apply on wearing parts (for example rechargeable
batteries) and damage caused by not adhering to the operating instructions is not covered by guarantee either. WTS
4u accepts no liability whatsoever for any resulting consequent damages. Since BioMetrixx has no influence on
correct and appropriate assemblage and operation it is obvious that guarantee applies only on completeness and
proper condition. BioMetrixx takes on neither liability nor guarantee for damages or consequential damages in
connection with this product. This applies especially when the device was altered or repaired, when circuits were
changed or non-original spare parts were used or when damage was caused by false or negligent operation or
abuse.
Environmental protection notice
At the end of its life span this product may not be disposed as normal household waste but must be disposed of at a
collecting place for recycling of electrical and electronic equipment. The icon on the product, in the manual, or on the
packing points to this fact. The materials are recyclable according to their labelling. Through reusing, material
recycling, or other forms of utilisation of old devices you make an important contribution to the protection of the
environment. Please ask the local administration for the responsible waste disposal centre.
Kontakt / Contact :
MKK-Vertrieb
Hauptstraße 15
D-85276 Hettenshausen
info@biometrixx.de
www.biometrixx.de
Loading...