Bioinsec CADENACIO Users Manual
Cadenacio Device Manual
Ver 1.0
902 Ace Techno Tower1, 197-24, Guro-3-dong, Guro-gu, Seoul, 152-848, Korea
Cadenacio device Manual
Content
1. Product Instruction ...........................................................................................................- 6 -
1-1 Product Specification ...............................................................................................- 7 -
1-2 Product Feature........................................................................................................- 8 -
2. The matters to be checked .............................................................................................- 10 -
2-1 Precaution / Emergency.........................................................................................- 10 -
2-2 Terminal Configuration ..........................................................................................- 12 -
2-3 Icon Guidance.........................................................................................................- 13 -
2-4 Screen Information & Voice Guidance ..................................................................- 15 -
2-5 The Proper Method For Registration And Input Of Fingerprint ........................- 16 -
3-1. Menu Setting .........................................................................................................- 17 -
3-2. The Organization Of Menu .................................................................................... - 20 -
3-3. Detail Menu Explanation .......................................................................................- 25 -
3. Door Setup...............................................................................................................- 30 -
Configuration...........................................................................................................- 30 -
Door.........................................................................................................................- 30 -
① Reader(In)............................................................................................................- 30 -
③ Input/Output.........................................................................................................- 30 -
④ Time Delay ..........................................................................................................- 30 -
⑤ Alarm .................................................................................................................... - 30 -
1 : OpenTooLongTime .....................................................................................................- 30 -
2 : OpenTooLong.............................................................................................................- 30 -
4. System ....................................................................................................................- 31 -
www.bioinsec.com - 2 -
Cadenacio device Manual
FCC Information to User
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Caution
Modifications not expressly approved by the party responsible for compliance could void the user’s
authority to operate the equipment.
FCC Compliance Information : This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may cause undesired
operation
www.bioinsec.com - 3 -
Master/Administrator
It refers to the master who can enter into menu mode of terminal. He has such
-
authorities to register/correct/delete users and also to change operation
Cadenacio device Manual
Explanation for terms
environment by modifying installations.
User ID of master is ‘0’. When user set terminal at first time, he have to use ‘1111’ as a
password. Master has to change this setting value or recognition method for fingerprint.
1 to 1 Verification
- It means the method of verifying the fingerprint after a user ID or card has been
entered.
- As it compares the only fingerprints registered at the user ID or card, it is called 1
to 1 Verification.
1 to N Identification
- It refers to the method of identifying the user by using the fingerprints only.
- As it is kind of method of identifying the same fingerprint as the one registered
without a user ID or card, it is called 1 to N Identification.
Security Level
- It is the grade used for the verification of fingerprint. Tune security level from ‘Very
Low (1)’ to ‘Very High (5)’ level. ‘3. Normal’ is set in default. The higher security
level is the lower FAR (fault acceptance rate). Reversibly the lower security level is
the higher FAR. There is an inverse proportion between FAR and FRR (fault
rejection rate).
Authentication Method
- It means various forms of verification combined with FP(fingerprint) verification,
PW(password) verification, RF(card) verification
Example) FP|PW: it verifies the person through password, when such verification
means as fingerprint and password fail.
www.bioinsec.com - 4 -
Function Key
- For using Time & Attendance mode, you can set. It refers to such keys as [F0], [F1],
[F2], [F3], [ENTER], and can change the verification into each verification mode.
I/O MAN (Controller)
- I/O Man is installed internal of office. And I/O Man communicates with encrypted
data with 485 communication, control lock device and support various I/O ports.
Access Sensor
- It was built-in sensor of terminal. When someone approaches within 1m to
terminal, it makes the LCD turn the light on and the camera automatically work.
LAN Card
Cadenacio device Manual
- It is built in module in the terminal. It absolutely needs to communication with
TCP/IP. If you want to use another communication like as RS232, 485, Wiegand not
TCP/IP, you have to remove LAN card and exchange necessary communication
module.
Flash Card
- Flash card mounts 32Mbyte flash memory as a built-in module in the terminal. The
flash memory saves firmware and all data. When the firmware is broken and need
to update, you just replace it with new flash card.
Key Phone Card (Option)
- It mounts as a module in the terminal. This board is installed in the terminal and
connects switchboard. And then, it is possible to connect telephone through
pressing extension digit in the terminal. And you can call with internal staff. When
calling between visitor and staff, the staff can open the door with pressing
password with using dial-up button.
www.bioinsec.com - 5 -
Cadenacio device Manual
1. Product Instruction
BKS-4800 device of Bioinsec company is fingerprint access control system which manages for
access controller, time & attendance, managing membership and student management to
check identification. This product can be used to identify each person with their fingerprint
and save image at the point of person’s recognition shot. As a result, when using RF system
and keypad, it solves many problems which are for copied card, issuing same card and same
pin number. Fingerprint has a feature like as permanence and unique. Because it is cost-
effective device, it widely uses in the world. The optic sensor of BKS-4800 has developed by
Bioinsec‘s own technology. And then Bioinsec is proud to be strong durability and stability.
Over 100 hundreds of larger enterprises, academies and governments which have been
supplied with BKS-4800 have a reputation of it.
BKS-4800 is directly mounted CMOS camera on the main board which function doesn’t
support in other company. It supports reduce the cost and gives high performance. And it can
be saved at captured user ’s image for access granted / failed and check image of visitor in
remote. In addition, it adds AC97 voice codec for high quality sound file and it can be possible
for downloading voice file (wav) to terminal and user can make their wanted language voice
file.
BKS-4800 is basically connected I/O Man which is supporting power supplied and easy
installation. It supports powerful solution through various I/O ports and it provide 128 x 64
size of LCD, 12 kinds of key, 5 kinds of function key for user friendly environment. When the
user try to access terminal, the access sensor is waking up, the light of LCD turns on, greeting
message is heard and web-camera is working at the point. Communication is TCP/IP basis. It is
possible to support RS-232/485 Wiegand and dial up communication with optional board. And
you just can replace LAN Card with your wanted communication board.
The speed of CPU has updated from 200Mhz to 400Mhz. As a result, high speed processing
and recognition speed. We have made flash memory, LAN Card to be a module. If there is
some problem with those parts, user just replaces each part for recovery of terminal. In case of
standalone mode and disconnected situation, user can save recognition image through
inserting 1GByte Micro SD Memory Card ( T Flash ) in the terminal. These various factions will
help your high security system for access controller. And it can be widely used for enterprise,
lab, and academy etc.
www.bioinsec.com - 6 -
1-1 Product Specification
CPU 32bit Micro processor, 400MHz
Cadenacio device Manual
Memory
LCD 126X64 Graphic LCD
Sensor Optic, 500 DPI
WebCam
Access Sensor Light is on: when a man approaches.
Size (H)160mm X (L)156mm X (D)34mm
Fingerprint data
size
User
Registration
NAND Flash 128Mbyte, 64Mbyte RAM
1Gbyte Micro SD Memory Card (T Flash) Option
Built-in 1.3Mpixel CMOS Camera
Focal Length : 3.7mm
Iris : Fixed
Angle Of View : 92˚(D)
512 Byte
1:1 User : 10,000 Persons ( 1user with 1FP )
1:N User: 4,000 Persons (1user with 1FP)
RF Card : 100,000 Persons
Log data : 100,000 data
Image Saving : 1G SD Memory Card (Option)
Interface with Controller (I/O MAN)
IN/OUT port
Communication TCP/IP on board, (RS-485, RS-232, Wiegand optional card)
Language
/ Voice
Power
consumption
Options RF-Card, Key Phone, Sub-reader
Lock 2Port , Exit button, Fire Alarm, Door Sensor,
Lock Sensor, Output 2Port, Spare I/O 5Port
Korean/English/Italian etc.. (supporting multi language select)
User-configuration for making voice guide through Wav file
350mA
www.bioinsec.com - 7 -
Cadenacio device Manual
1-2 Product Feature
High-performance CPU use
- It supports fast recognition to use 32 Bit 400 MHz ARM CPU.
Built-in mass storage memory
- It basically built in 32Mbyte NAND flash memory.
- There is socket which supports mounting Micro SD Memory Card for saving image. If
you mount 1G or 2G T-Memory Card, there isn’t any problem for saving log and
image saving.
Mounting for various external RF reader
- It is possible to mount EM, MIFARE, etc.
- It can configure In/Out reader with other company’s RF reader through 2 kinds of
Wiegand Input Port.
Web Camera Function
- Saving image for access succeed / Fail image through built in camera in OnBoard
- Remote control and visitor view by videophone ( Option )
Interlocking speed gate
- It can be set for door open time by 1/10 sec unit.
- It is possible to set door lock open time at least 0.5 sec unit to interlock speed gate.
Interlocking parking system
- It supports for One terminal with 2 reader for IN/OUT.
- I/O Man is design to control each relay for each reader for interlocking parking
system.
Access sensor with greeting message
- When someone try to access terminal within 1 M, the LCD turn the light on ,
working web-camera and listening greeting message due to access sensor.
Built in Key phone ( Option Board )
- Connect PBX in the internal company. And call with external number with using BKS
4800 and external number through phone. It is possible to open door with pressing
password in the phone for customer to be able to come in.
AC97 voice file play (playing wav file)
- It supports high-quality sound and downloading voice file or sound source which is
made by user.
Supporting Multi language
- Language is selectable through menu of terminal. Voice guide can be changed after
www.bioinsec.com - 8 -
Cadenacio device Manual
recording.
Installation I/O Man for Control access door & Extension of I/O
- I/O Man and BKS-4800 is communicated with encrypted data through exchanging
key for high security.
- I/O Man can’t communicate with new terminal without pressing set up button for
doing encrypted communication both of all.
- It supports various I/O ports including fire alarm.
- It supports 2 kinds of relay.
Reliance on using fingerprint
- It solves the security problems which can be happed in case of using card system or
keypad system like as copied card, losing etc.
Reliable fingerprint algorithm
- FAR and FRR is minimized by development of Bioinsec’s own algorism.
Applying control for access door and management Time & Attendance
TCP/IP built in the terminal is able to manage many terminals.
Supporting Flexible function key for managing time & attendance
- 4 kinds of programmable function key and designated time & attendance code up
to 9 kinds are to be flexibly use for managing Time & Attendance. You can adopt
various functions with one terminal.
Management with low cost
- Regarding ID card, it needs to be re-issue for new user and missing it and it needs
cost. But if you use fingerprint terminal, there doesn’t need any extra additional fee.
EM or MIFARE card can be used for built in RF reader in terminal from each reader’s
sort.
Standalone mode or Network connection
- Bioinsec’s fingerprint access controller system can be used for standalone or TCP/IP,
RS-232, RS-485 and MODEM with server. And it is possible to make your own
program with using SDK supplied with product package. BKS-4800 have their own
RTC and management for log (Up to 10,000) and it can be used for time&
attendance without I/O Man (Lock controller)
User time zone setting and reporting
- It is possible to download timezone, schedule from server to terminal by weekly or
monthly.
High-Speed user download
- It takes just 10 seconds to download 10,000 users from server to terminal.
Automatically transmission log
- When the terminal and server is connected, the log is automatically transmitted to
www.bioinsec.com - 9 -
Cadenacio device Manual
server and then deleted in terminal.
2. The matters to be checked
2-1 Precaution / Emergency
- The matters that demands special attention for safety
Don’t turn the power on when there is the impurity in plug.
Don’t operate with wet hand nor let water inside the machine.
Don’t install electro flow or a leak of electricity.
Don’t install in place under direct sunlight, water, severe change of temperature and
explosiveness.
Please be careful to install or move the terminal by customer.
Don’t install the terminal in damp or dusty place because it can be happened electronic short
and failure.
Set up terminal internal place. When you must terminal outside, please make supplement box to
protect terminal at out side environment.
Refer wiring installation manual for set up terminal.
Enroll master ID and his fingerprint after installation terminal.
Don’t put the alcohol, benzene, water like as liquid and pin, needle like as metal in the
fingerprint optic sensor.
Be careful not to go into drink, water, drug like as those liquid in the terminal
Don’t drop terminal and give strong shock.
Don’t spray water on it to clean nor wipe it off with benzene, thinner or alcohol.
Don’t carelessly break down or fix terminal.
※
If there are any accidents not to carefully use in the cautions, there is not
responsibility
www.bioinsec.com - 10 -
Cadenacio device Manual
The matter should be done at first time
- Change system password for your security.
- Default setting password at manufacturing site : 1111
- Power should be supplied after all cablings are completed.
- When you can’t verify fingerprint well
- Try again, after removing some dirties and water on fingerprint
- Please lightly place finger on the sensor.
- Don’t move fingerprint when the fingerprint is sensing.
In case of fingerprint hard to be processed
- When device is in disorder without special problem, Just push Reset switch, then it ‘s
back to setting status before latest trial.
- You can call anytime to customer support center for your trouble.
www.bioinsec.com - 11 -
Loading...