BioChef KT-BL-BC-LF-AU-BL, KT-BL-BC-LF-AU-WH, KT-BL-VB-LF-AU-WH, KT-BL-VB-LF-AU-BL User Manual

Living Food Blender

UNLOCK THE

GOODNESS

FEEL THE

GREATNESS

PLEASE READ AND SAVE THESE INSTRUCTIONS

1. Please read all the instructions before use.

2. Before plugging in the appliance, check that the electrical rating shown on the
rating plate corresponds with your household electricity supply.

3. Close supervision is necessary when the appliance is used near children or
incapacitated persons.

4. To avoid and protect against the risk of electrical shock, never immerse the
blender in water or other liquid. If there is water inside the unit base, please
contact your authorised service centre.

5. Unplug from outlet when not in use and before cleaning.

6. Do not leave your blender unattended when operating.

7. Do not operate the appliance with a damaged cord or plug or if the appliance
malfunctions, is dropped or damaged in any manner. If purchased outside
Australia, please contact your BioChef dealer.

8. Do not use outdoors. The unit is designed for indoor use only.

9. Do not let the cord hang over the edge of table or counter.

10. Keep hands and utensils out of the jug container. Only use the tamper provided
with the blender. A rubber scraper or spatula may be used but only when the
BioChef blender is not running.

11. The use of attachments not authorised or sold by the manufacturer for use with
this blender may void warranty.

SMOOTHIES

DIPS & DRESSINGS

NUTS AND

SEEDS

SOUPS

12. Always operate with the lid and lid plug/measuring cup firmly in place. The lid
plug should only be removed when adding ingredients and when using the
tamper. The LED control panel will not light up until the jug base has engaged
with the safety switch on the motor base.

13. When blending hot liquids or ingredients use caution; spray or escaping steam
may cause scalding and burns. Do not fill jug to the maximum capacity. Keep
hands and other exposed skin away from the lid opening to prevent possible
burns.

14. When making nut butters or oil based foods, do not process for more than one
minute after the mixture starts to circulate in the container. Processing for longer
periods can cause overheating.

15. If in the event the motor overheats, the temperature monitoring system will
trigger and the motor will stop. Switch off and unplug the appliance and let the
motor cool down. The motor temperature monitoring system resets after the
blender is unplugged from wall socket for 45 minutes.

16. Blades are sharp. Use caution when handling the blade. Do not attempt to
disassemble blade and blade assembly.

17. The tamper provided must be used only when the main part of the lid is in place.

18. Any servicing should be performed by Vitality 4 Life or an authorised service
representative. Do not attempt to disassemble, repair or modify the appliance.

NOTICE: FAILURE TO FOLLOW ANY OF THE IMPORTANT SAFETY PRECAUTIONS IS

A MISUSE OF YOUR BIOCHEF BLENDER AND CAN CREATE THE RISK OF SERIOUS
INJURY AND VOID YOUR WARRANTY.

DICE

GRIND COFFEE

BEANS

MILL

60 ml Measuring Cup/
Lid Plug

For precision and
convenience

2 Litre BPA Free Tritan™ Jug

Free of harmful plastics,
lightweight, virtually
unbreakable with
measurement guide.

Japanese Stainless Steel
Blades

Unlock valuable nutrients
inside the skin, seeds and
pulp to make phytonutrients
more bio-available to you.

Patented
Enzyme
Protection
Technology™
(EPT)

Never burn
vital nutrients
and enzymes
out of your
food again.

Automatic Micro
Safety Switch

Will only operate when
the jug safety switch is
activated.

LCD Touch
Control

Pre-programmed
time, speed
and pulse
combinations for
different recipes.

High Performance
Commercial Motor

1680 Watt motor.

Power Cord

Wraps around the feet
and clips under the
base for easy storage.

Soup BlendChopDecreaseIncreaseOn/Off Pulse

Operating Instructions

On/Off Switch

Plug in the blender and place the
blender container on the motor
base, all icons on the LED Display
will light up. After the Machine
beeps for 1 second, the blender
will enter the Energy-Saving
Mode.

The ON/OFF Key will flash in red
light and all other icons on the
LED Display will be hidden from
view. Touch the ON/OFF Key
once, and the Preset Programs,
Time Display and Speed Setting
Keys switch on. The Blender is
now in stand-by mode and ready
for processing ingredients. If the
blender is kept idle for 3 minutes,
it will resume to the energy­saving mode.

Preset Programs

When the blender is in stand-by
mode, select the desired preset
program then press the ON/
OFF Key to begin blending. The
blender will operate according
to which program is selected. If
at any time the blender needs
to be stopped simply select the
ON/OFF icon and operation will
stop and the Stand-By Mode will
resume.

Pulse Key

In stand-by mode or during
operation press the pulse key
once, the icon flashes in 0.1
second intervals and the blender

does not operate. Press and
hold the pulse key again and the
blender operates in the fastest
speed available. When the pulse
key is released the blender will
resume stand-by mode.

Tamper

The tamper will allow you to
accelerate the process of very
thick and frozen mixtures.
Using the tamper to maintain
circulation of the ingredients
will reduce the air pockets from
forming and will help with overall
consistency when blending. The
tamper should only be used
during operation through the lid
plug opening to avoid injury.

Use the tamper to press
ingredients into the blades as
you make ice creams, nut butters
or puree fruits. The Tamper
also comes with patented
Enzyme Protection Technology
(EPT™). The temperature
gauge is designed to measure
temperatures of ingredients to
minimise depletion of enzymes
and nutrients from your food.
When the Tamper is being used
during operation, press the
button located on the top of the
tamper to display a temperature
range between 0°- 105 °C. Use the
Enzyme Protection Technology
(EPT™) as you prepare whole
food smoothies and fibrous
juices.