PA300
USER MANUAL
48mm
15mm
PORTABLE AIR-CONDITIONER
CONTENTS
55mm
58mm
55mm
105mm
108mm
58mm
3.52kW
3.87kW
R410A/480g
1.8MPa/4.5MPa
2.0MPa/5.5MPa
450m³/h
52dB(A)
31 kg
318×710×528mm
COOLING 1400W
1460WHEATING
PORTABLE AIR CONDITIONER
Airo1
SPECIFICATIONS
IMPORTANT SAFEGUARDS
FEATURES AND PARTS LIST
PANEL CONTROL
REMOTE CONTROL
OPERATION METHODS
INSTALLATION
WATER DRAINAGE METHODS
MAINTENANCE
TROUBLE SHOOTING
INSTALLATION ACCESSORIES
APPENDIX
...................................................................................................................
MODEL
COOLING CAPACITY 5.68kW/ 18000BTU
HEATING CAPACITY 6.04kW/ 19000BTU
REFRIGERANT/CHARGE R410A/480g
POWER SUPPLY 240V/50Hz
RATED INPUT COOLING 1400W
PERMISSIBLE EXCESSIVE OPERATING
PRESSURE (SUCTION/DISCHARGE)
MAXIMUM ALLOWABLE PRESSURE
(LOW PRESSURESIDE / HIGH PRESSURE SIDE)
AIR FLOW 450m³/h
NOISE 52dB(A)
NET WEIGHT 31 kg
DIMENSION (W×H×D) 318×710×528mm
......................................................................................................
.................................................................................
..............................................................................
......................................................................................................
.................................................................................................
..........................................................................................
............................................................................................................
.........................................................................
.........................................................................................................
...........................................................................................
........................................................................
PORTABLE AIR CONDITIONER
PA300
HEATING 1460W
1.8MPa/4.5MPa
2.0MPa/5.5MPa
10
11
12
13
14
1
2
4
5
6
APPENDIX
Fuse Parameter
Type: FSD
Voltage: 240V
Current: 3.15A
7
8
Disposal: Do not dispose this product as unsorted municipal waste. Collection
of such waste separately for special treatment is necessary.
14
Energy Saving Tips.
TROUBLESHOOTING
Do not cover or restrict the airflow from the outlet or inlet
The minimum distance from walls and furniture etc should be 50cm.
Keep window blinds and /or curtains, closed during the sunniest part of the
grills.
day.
Keep the filters clean. Under normal conditions, the filters should be
cleaned approximately every 30 days. Since the filters remove airborne
particles, more frequent cleaning maybe necessary, depending on the
indoor air quality.
Set the fan to "high cool" and the thermostat to the coolest position for
the initial start-up, then set the fan to "low cool" and adjust the
thermostat to a comfortable setting.
Before contacting customer service, firstly check the following:
Trouble Check Solution
Is power available?
Unit does not
operate
Cooling/heating
efficiency not good
Unit
noisy /
vibrati
ng
U
nit
frequently
starts and
stops
Is the fuse blown, or
switch off?
Is the auto-on timer on?
Is water full alarm on?
Is the air inlet or outlet blocked or
filters dirty?
Are there any other heat sources
in the room?
Is the set temperature suitable?
Is fan speed set at low?
unit inclined?
Is the
Is the voltage normal?
Is the exhaust tube kinked or
bent
?
Have you added additional exhaust
tubes?
power
Stop using the unit immediately and contact customer
service if any of the following occur:
·The fuse blows repeatedly.
·The mains
electrical cord becomes excessively hot or any part of the
cord or insulation is damaged.
·Abnormal odour or smoke comes from the unit.
Check that the mains supply to
the unit
is correct.
Change the fuse, switch unit on.
Change or switch off the timer.
Drain water.
Remove any blockages and
clean the
Remove the heat source.
Change the temperature.
Select a suitable fan speed.
Place the unit on a flat and
level
Check that the mains supply to
the unit is correct.
Set
Remove any extra tubes.
filters.
surface.
the exhaust tube correctly.
Self-Diagnosis Error Codes
Error code Meaning
E2 Room temperature faults
E3 Faulty coil temperature
E4 Coil defrosted. Normal.
3
12
Loading...