Binatone Electronics SH040 Users Manual
1
Motorola (logo above) EN
Quick Start Guide
MODELS: SH040
Product ID: Escape 500 ANC
Bluetooth ID: D036701
FCC ID: VLJ-SH040
IC: 4522A-SH040
Frequency Band: 2.402 – 2.480 GHz
Working temperature: 0oC – 45oC
1. At a Glance
2
1. Left Ear cup
2. Right Ear cup
3. ANC on / off
4. Volume Up/Next Track
5. Volume Down/Last Track
6. Micro USB Port
7. LED Indicator
8. Microphone
9. Play / Pause / Power
10. AUX-IN
1 3 4
7
6
5
10
8
9
2
2. Charge
Fully charge before use. Any attempt to remove or replace your battery will damage your headset.
• Charge: Before use, charge until the status light turns blue.
• When battery runs out, charge headphones for 1 second before using with included headphone
cable to continue listening.
3. Connect & Go
Note: The Battery should only be removed by a recycling facility. Any attempt to remove or
replace your battery will damage the product and void your warranty.
Caution: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED PRODUCT PROPERLY.
Wall charger not
included
Turn Bluetooth on
On
Turn headset on(charge before use)
Long press for 4 sec
Status Light – Blue flash rapidly Go to your
Bluetooth setting and pair ‘Escape 500 ANC’
3
4. Buttons Operation
Music
Play/Pause
Press
Volume Down/Up
Press - / +
Next Track
Long press + for 2s
Previous Track
Long press - for 2s
ANC on / off
Slide ANC switch button
Calls
Answer/ end call
Press
Reject a call/
Long Press - / + for 2s
Call waiting
Receive incoming call and end ongoing call
Press
Mute during call
Press - and +
Pair
Enter pairing mode (first time)
Press and hold for 4s
Enter pairing mode
Press and hold for 2s
Voice
To issue a voice command during idle mode,
then say the command
Double Press
5. LED Indicators
Charging Case (LED at the front)
Pairing
Blue flash
Standby
LED off
Charging
Red steady
Fully charged
Blue steady
Battery low
Red flash
Loading...