Binatone Electronics MBP99, MBP944PU Users Manual

User’s Guide

Motorola Halo+ Over-the-Crib Wi-Fi® monitor and sleep companion

odel: MBP944CONNECT

The features described in this User’s Guide are subject to modifications without prior notice.

Welcome...

to your new Motorola Halo+!

Thank you for purchasing Motorola Halo+. Now you can see and hear your baby sleeping in another room or you can monitor your older children in their play room.

Please keep your original dated sales receipt for your records. For warranty service of your Motorola product, you will need to provide a copy of your dated sales receipt to confirm warranty status. Registration is not required for warranty coverage.

For product-related questions, please call:

US and Canada 1-888-331-3383

Email: support@motorolastore.com

On the Web: www.motorolastore.com

This User’s Guide has all the information you need to make the most out of your product.

Please read the Safety Instructions on pages 5 before you install the unit.

Inside the Box

• 1 x Baby Unit (Camera)

• 1 x Parent Unit

•

1 x Crib Mount Kit

• 2 x Power Adapters (Baby Unit and Parent Unit)

• 1 x Quick Start Guide

ENGLISH

Overview of Crib Mounting Kit and Baby Unit

Crib Mounting Kit

1. Night Light Ring

2. Baby Unit

3. Baby Unit Release Button

4. Lightshow Projector ON/OFF/

Pair

5. Night Light Switch

Light Show Projector window

7. Top Pole Release Button

8. Securing Knob

9. Telescopic Leg

10. Mounting Knob

11. Adjustive Plate

12. Power Port

12 3

Baby Unit

13. High Sense Microphone

14. Photo Sensor (Night Vision

de)

15. Camera Lens

16. Power ON/OFF Switch

17. Speaker

18. Antenna

19. PA I R butto n

20. Power Socket

Overview of the Parent Unit

DC 5V

1. Display (LCD screen)

2. Sleep Activity button

3. TAL K butto n T

ess and hold to speak to

13 14 15 16

your baby.

4. RESET button (recessed -

use small pin)

5. UP button +

Move Up menu options.

6. DOWN button -

Move Down menu options.

7. MENU button M

Press to op Menu o

8. OK button O

9. Power Socket

10. LEFT button <

Move Le options

11. RIGHT button >

Move Right along me options

12. Charging LED:

en / close the

ptions.

ft along menu

BLUE when mains powe co

nnected.

13. Parent Unit ON/OFF LED

(

Green)

14. Audio Level LEDs (Green,

mber, Red, Red)

15. Vol u me butt o ns

Press -/+ to decrease/ increase Volume level on Parent Unit

16. Power button 0

Press and Hold to turn the Parent Unit ON/OFF VIDEO ON/OFF button V Toggle to turn the LC

een ON/OFF (Note:

scr is m

aintained.)

17. Microphone

18. Stand

19. Speaker

20. Antenna

audio

ENGLISH

Parent Unit menu icons

Signal Level Indication (4 Levels)

Night Vision Mode (Video also changes to Black/White)

Tal k M o d e O n

Indicates the screen off timer is set

Volume Level Control (8 Levels)

No Baby Unit detected

Sleep activity monitoring.

Battery Level Indication (4 Levels)

Night Light is ON

Night Light Brightness Control with 3 levels of selection

Night Light Colour Control with 7 colour options

Night Light Colour Loop with 7 colours

Zoom Level Control (1X, 2X)

LCD Brightness Level Control (8 Levels)

Audio Playlist selection - Lullaby/Soothing Sounds ,

Audio Book

Alarm Setting (6h, 4h, 2h, OFF) On status bar, indicates alarm set, and when flashing, that alarm time has been reached or missed.

Temperature scale select (oC / oF) Readings display in BLUE, but turn RED if > 29ºC / 84ºF, or < 14ºC / 57ºF

Displays HH Displays LL

Camera Control (scan , view , add , delete X)

Set Screen Off Timer (Off X, 5 min, 30 min, 60 min)

View multiple cameras on screen. Available when you have more than 1 Baby Unit (Camera).

Light Show Projector is on.

C / oF if >36oC / 97oF.

C / oF if < 1oC / 34oF.

ENGLISH

Table of contents

1. Safety Instructions ................................................................................8

2. Getting Started ..................................................................................... 11

2.1 Setting up the Baby Unit with Crib Mount Kit .........................11

2.2 Setting Up Baby Unit at Desk Mode ...........................................14

2.3 Parent Unit Power Supply ..............................................................15

2.4 Registration (Pairing) .......................................................................16

3. Using the Motorola Halo+ .................................................................. 17

3.1 Set Night Light .................................................................................... 17

3.2 Set Lightshow Projector .................................................................. 17

3.3 Night Vision Mode ............................................................................. 17

3.4 Talk Mode .............................................................................................. 17

3.5 Adjust Parent Unit volume ............................................................. 17

3.6 Video ON/OFF ....................................................................................17

3.7 Sleep activity monitor ...................................................................... 18

3.8 Temperature Display (HH °C / °F or LL °C / °F) ................... 18

4. Parent Unit Menu Options ................................................................. 19

4.1 Set Night Light ....................................................................................19

4.1.1 Night Light Brightness control ......................................19

4.1.2 Night Light Color control ................................................ 19

4.2 Zoom ....................................................................................................... 19

4.3 LCD Display Brightness ................................................................. 20

4.4 Audio Playlist ..................................................................................... 20

4.4.1 Lullaby/Soothing Sounds Playback .......................... 20

4.4.2 Audio Book (English only) Playback ........................ 20

4.4.3 Stop Playback ...................................................................... 21

4.5 Alarm .......................................................................................................21

4.6 Camera Control ..................................................................................22

4.6.1 Add (pair) a camera ......................................................... 22

4.6.2 View a camera ....................................................................23

4.6.3 Delete a camera .................................................................23

4.6.4 Scan cameras ......................................................................24

4.7 Temperature format .........................................................................24

4.8 Power Saving Mode .........................................................................24

4.9 View multiple cameras on screen ...............................................25

4.10 Lightshow Projector Setting ......................................................... 25

5. Wi-Fi® Internet Viewing .................................................................... 26

5.1 Minimum System Requirements ..................................................26

6 Table of contents

5.2 Getting Started - Connecting Devices ......................................27

5.2.1 Setup .......................................................................................27

5.3 User Account and Camera Setup on Android™ Devices ...28

5.3.1 Download Hubble for Motorola Monitors App .......28

5.3.2 Create a new Hubble for Motorola Monitors

account ................................................................................. 29

5.3.3 Add the Camera to your account .............................. 30

5.4 User Account and Camera Setup on iPhone®/iPad® ........... 34

5.4.1 Download Hubble for Motorola Monitors App ...... 34

5.4.2 Create a new Hubble for Motorola Monitors

account ..................................................................................35

5.4.3 Add the Camera to your account .............................. 36

5.5 Procedure for Resetting the Camera .......................................40

6. Disposal of the Device (Environment) ...........................................41

7. Cleaning ................................................................................................ 42

8. Help ........................................................................................................ 43

9. General Information ............................................................................ 51

10. Technical Specifications ....................................................................55

ENGLISH

Table of contents 7

1. Safety Instructions

WARNING

Strangulation Hazard: Children have STRANGLED in cords. Keep this cord out of the reach of children (more than 1m (3ft) away). Never use extension cords with AC Adapters. Only use the AC Adapters provided. Stop using the crib mount when baby begins to push up on hands and knees.

8 Safety Instructions

WARNING

This digital video Baby Monitor is compliant with all relevant standards regarding electromagnetic fields and is, when handled as described in the User's Guide, safe to use. Therefore, always read the instructions in this User's Guide carefully before using the device.

Adult assembly is required. Keep small parts away fr

•

om children when assembling. This product is not a toy. Do not allow children to play with it.

•

• This Baby Monitor is not a substitute for responsible adult supervision.

•

Keep this User Guide for future reference. Do not place the

•

Baby Unit or cords in the crib or within reach of the baby (the unit and cords should be more than 1 metre (3 ft) away)

• Keep the cords out of reach of children.

• Do not cover the Baby Monitor with a towel or blanket.

• Never use extension cords with power adapters. Only use the power adapters provided.

• Test this monitor and all its functions so that you are familiar with it prior to actual use.

• Do not use the Baby Monitor near water.

• Do not place the Baby Monitor near a heat source.

• Only use the chargers and power adapters provided. Do not use other chargers or power adapters as this may damage the device and battery pack.

• Do not touch the plug contacts with sharp or metal objects.

ENGLISH

Safety Instructions 9

CAUTION

The Parent Unit includes a built-in, lithium-ion rechargeable battery pack, which is not a user-accessible item. If you think the battery needs replacing, please contact the helpline. Do not try to replace it yourself.

Risk of explosion if battery is replaced by an unapproved battery type.

Dispose of used batteries according to their instructions.

Important guidelines for installing your Baby Monitor

• To use your Video Monitor Baby and Parent Units together, you must be able to establish a radio link between them, and the range will be affected by environmental conditions.

• Any large metal object, like a refrigerator, a mirror, a filing cabinet, metallic doors or reinforced concrete between the Baby and Parent Unit may block the radio signal.

• The signal strength may also be reduced by other solid structures, like walls, or by radio or electrical equipment, such as TVs, computers, cordless or mobile phones, fluorescent lights or dimmer switches.

• Use of other 2.4 GHz products, such as wireless networks

routers), Bluetooth™ systems, or microwave ovens,

(Wi-Fi may cause interference with this product, so keep the Baby Monitor at least 5 feet away from these types of products, or turn them off if they appear to be causing interference.

• If the signal is weak, try moving the Parent and/or the Baby Unit to different positions in the room(s).

10 Safety Instructions

2. Getting Started

2.1 Setting up the Baby Unit with Crib Mount Kit

Step 1: Fasten the round adaptive plate on the screw thread of

the Crib Mount Stand (see note).

Step 2: Place the mount stand against the crib with the screw thread going through the crib bars.

Step 3: Secure the mounting knob on to the screw thread.

ENGLISH

Getting Started 11

Step 4: Keep the stand parallel and tighten the mounting knob so

Note: Ensure the

telescopic leg is extended so the foot sits tight against the floor.

that the

crib mount stand is secured to the crib bars.

Note: the adaptive plate if the top rail of your crib is too thick for the bracket.

Only use

Step 5: Extend the telescopic leg of

the crib stand so the foot

is secured to the floor.

Step 6: Tighten the securing knob to lock the telescopic leg in place.

12 Getting Started

Step 7: Insert the

Top Pole (with night light ring) into the

crib mount stand. It will lock into place with a 'click'.

Step 8: Dock the baby unit into the top pole (with night light ring) as shown in the picture below.

Note: Before removing the camera from the top pole. Rotate the top p

ole outside the crib area to avoid the possibility of the camera

falling into the crib.

Step 9: Plug the Power Adapter (DC5V / 1.5A) into the socket on Crib Mount Stand

and the other end to a suitable electrical

outlet.

ENGLISH

Getting Started 13

Please mount the camera on the long s

ide of the crib for optimal

view.

2.2 Setting Up Baby Unit For Desk Mode

When your child is older, the baby unit (camera) can be removed Mode'. Connect the power supply directly into the Baby Unit (camera) when using in desk mode.

NOTE

Only use the enclosed Power Adapter (5V DC / 1500mA).

1. Slide the POWER ON/OFF switch to the ON position to

2. Slide the POWER ON/OFF switch to the OFF position to turn

and used without the crib mounting kit. This is 'Desk

Connect the DC plug of the power adapter to the Baby Unit (camera) and the other end to a suitable mains power socket.

turn

the Baby Unit on.

the Baby Unit off.

14 Getting Started

2.3 Parent Unit Power Supply

1. Connect the DC plug of the power adapter (5V DC /

1500mA) t electrical

o the Parent Unit and the other end to a suitab

outlet. Press and hold the POWER button on

the top of the Parent Unit to turn it ON.

NOTE

A rechargeable battery (Lithium ion battery 2000mAh) inside the Parent Unit allows you to move it without losing the link and picture from the Baby Unit. The battery gives up to 5 hours operation for the Parent Unit. We recommend you charge it for at least 16 hours before first use, or when the Parent Unit indicates the battery is low.

ENGLISH

Getting Started 15

2.4 Registration (Pairing)

___

The Baby Monitor is pre-registered to your Parent Unit. You do not need to register it again unless the Baby Unit loses its link with the Parent Unit.

To re-register your Baby Unit, or register a new Baby Unit, follow the procedures below:

1. Press the M button of the Parent Unit an

p up.

2. Press the < LEFT button or > RIGHT button until is

highlighted, and the will pop up

3. Pr

ess the + UP button or - DOWN button to

and press the O button to co

4. Cam

era will pop up, press the + UP button or -

del/ add/ view/ scan

nfirm.

DOWN button to select the desired Camera, and pres O butt

on to start searching for a camera unit, with "press

PAI R on c a m" shown.

Note: If a camera is currently paired with the Parent Unit, its camera location (with a * against it) cannot be selected for a new registration.

5. Press and hold the PAIR button on the underside of the Baby

Unit until the Parent Unit finds the camera, beeps and PAIR OK appears on the screen. The video from the camera then app

ear.

NOTE

If a particular Baby Unit was registered previously, registering this current Baby Unit again will cancel its old registration.

d the menu bar will

select

add

s the

will

16 Getting Started

3. Using the Motorola Halo+

Please read these instructions carefully and be aware that this product is only intended as an aid. It is not a substitute for responsible, correct parental supervision.

3.1 Set Night Light

The nightlight feature provides a soft glow to help soothe your baby to sleep and help keep them calm throughout the night. Press 7 colour options. The light has 3 levels of brightness available.

3.2 Set Lightshow Projector

Toggle button to switch Light Show Project on or off.

3.3 Night Vision Mode

The Baby Unit has 8 high-intensity infrared LEDs for picking up clear images in the dark. When the built-in photo sensor on the front of the Unit detects a low level of ambient light, the LEDs will automatically activate and the screen on the Parent Unit will display in black and white. The icon will be displayed at the top of the screen.

3.4 Talk Mode

Press and hold the TALK button T on the parent unit to talk to your lovely baby through the baby unit’s loudspeaker.

3.5 Adjust Parent Unit volume

There are 8 volume levels on Parent unit, including volume off. Press < to increase or > to decrease the volume of Parent Unit.

3.6 Video ON/OFF

When it is at standby mode, toggle VIDEO On/Off button to turn the LCD screen on or off, whilst still leaving the audio monitor on.

button once to switch Night Light on, tap again to select

ENGLISH

Using the Motorola Halo+ 17

3.7 Sleep activity monitor

Press to review the sleep activity graph of your baby recorded by the camera.

3.8 Temperature Display (HH °C / °F or LL °C / °F)

The temperature reading from the temperature sensor at the back of the Baby Unit will be displayed at the top of the LCD screen in °C or °F (see Section 4.7 “Temperature” for how to change). The readings will turn RED if the temperature goes above 29°C / 84°F or below 14°C / 57°F. The reading will change to HH °C / °F if the temperature goes above 36°C / 97°F. The reading will change to LL °C / °F if the temperature goes below 1°C / 34°F.

18 Using the Motorola Halo+

+ 41 hidden pages

Binatone Electronics MBP99, MBP944PU Users Manual

Specifications and Main Features

Frequently Asked Questions

User Manual