User’s Guide
5" Video Baby Monitor With Wi-Fi® Internet Viewing
Models: MBP855CONNECT, MBP855CONNECT-2,
MBP855CONNECT-3, MBP855CONNECT-4
The features described in this User’s Guide are subject to modifications without prior notice.
Welcome...
to your new Motorola Digital Video Baby Monitor!
Thank you for purchasing the Digital Video Baby Monitor. Now you can see and hear your baby sleeping in another room or you can monitor your older children in their play room.
Please retain your original dated sales receipt for your records. For warranty service of your Motorola product, you will need to provide a copy of your dated sales receipt to confirm warranty status. Registration is not required for warranty coverage.
For product-related questions, please call:
US and Canada 1-888-331-3383 Email: support@motorolahome.com
On the Web: www.motorolahome.com/support
This User's Guide provides you with all the information you need to get the most from your product.
Before you use the Digital Video Baby Monitor, we recommend that you fully charge the battery that is pre-installed in the Parent Unit, so that it continues to work if you disconnect it from the power supply. Please read the Safety Instructions on pages 8 - 10 before you install the Units.
Got everything?
•1 x Parent Unit
•1 x Baby Unit (Camera)
•1 x Power adapter for Parent Unit
•1 x Power adapter for Baby Unit
•1 x Stargrip
In multi-camera packs, you will find one or more additional Camera Units with power adapters.
Overview of the Parent Unit
1 |
12 13 |
14 |
15 |
16 |
17 |
2 |
|
|
|
|
7 |
3 |
|
|
|
|
8 |
4 |
|
|
|
|
9 |
5 |
|
|
|
|
10 |
6 |
|
|
|
|
11 |
18 |
19 |
1.Display (LCD screen)
2.VIDEO ON/OFF button V Press to turn the LCD screen ON/
OFF. (Note: The audio remains on when the screen is OFF.)
3.TALK button T
Press and hold to speak to your baby.
4.RESET button (recessed - use small pin)
5.UP button +
Normal Mode: Tilt camera Up Menu Mode: Move Up menu options
6.DOWN button -
Normal Mode: Tilt camera Down Menu Mode: Move Down menu options
7.MENU button M
Press to open / close the Menu options
8.OK button O
Press to confirm a selection
9.Micro USB power adapter socket
10.LEFT button <
Normal Mode: Pan camera Left
Menu Mode: Move Left along menu options
11.RIGHT button >
Normal Mode: Pan camera Right Menu Mode: Move Right along menu options
12.Charging LED:
Blue when connected to charging adapter.
13.Parent Unit ON/OFF LED (Green when Parent Unit is on)
14.Audio Level LEDs (Green when sound level at Baby end is low and turns to Red, when the level is high.)
15.Volume buttons
Press - / + to decrease/increase
Volume level on Parent Unit 16. Power button 0
Press and Hold to turn the Parent Unit ON/OFF
17.Microphone
18.Stand
19.Speaker
Parent Unit menu icons
|
Signal Level Indication (5 Levels) |
|
Night Vision Mode (Video also changes to Black/White) |
T |
Talk Mode On |
Volume Level Indication (4 Levels)
Panning Camera Left
Panning Camera Right
Tilting Camera Up
Tilting Camera Down
Zoom Level Control (1X, 2X)
Brightness Level Control (8 Levels)
Lullaby Control (5 Sound Selections)
Alarm Setting (6h, 4h, 2h, OFF)
On status bar, indicates alarm set, and when flashing, that alarm time has been reached or missed.
|
Temperature scale select (oC / oF) |
|
|
|
|
|
Readings display in BLUE, but turn RED if > 29ºC / 84ºF, or < 14ºC / 57ºF |
||||
|
Displays HH oC / oF if >36oC / 97oF. |
|
|
|
|
|
Displays LL oC / oF if < 1oC / 34oF. |
|
|
|
|
|
Camera Control (scan |
, view |
, add |
, delete |
) |
V |
Set Screen Off Timer (Off |
, 5 min, 30 min, 60 min) |
|
Indicates the screen off timer is set
Volume Level Control (8 Levels + Off)
Indicates volume is off
No Baby Unit detected
View multiple cameras on screen. Available when you have more than 1 Baby Unit (Camera).
Overview of Your Baby Unit (Camera)
1.Photo Sensor (Night Vision Mode)
2.Camera Lens
3.Infrared LEDs (x 8, for night vision)
4.Power LED (Blue when on) On when linked to Parent Unit
Flashes when searching for Parent Unit
5.Microphone
6.Camera Battery LED
On when AC power is connected to camera.
Flashes when the battery level of the camera is low.
7.POWER ON/OFF switch
8.Temperature Sensor
9.Micro-USB Power Socket
10.PAIR Button
11.Speaker
12.Star Grip or Tripod Mount
13.Antenna
Important guidelines for installing your Baby Monitor
•To use your Video Monitor Baby and Parent Units together, you must be able to establish a radio link between them, and the range will be affected by environmental conditions.
•Any large metal object, like a refrigerator, a mirror, a filing cabinet, metallic doors or reinforced concrete between the Baby and Parent Unit may block the radio signal.
•The signal strength may also be reduced by other solid structures, like walls, or by radio or electrical equipment, such as TVs, computers, cordless or mobile phones, fluorescent lights or dimmer switches.
•Use of other 2.4 GHz products, such as wireless networks (Wi-Fi® routers), Bluetooth™ systems, or microwave ovens, may cause interference with this product, so keep the Baby Monitor at least 5 feet away from these types of products, or turn them off if they appear to be causing interference
•If the signal is weak, try moving the Parent and/or the Baby Unit to different positions in the room(s).
Table of contents
1. |
Safety Instructions.................................................................................... |
8 |
||
2. |
Getting Started....................................................................................... |
11 |
||
|
2.1 |
Baby Unit Power Supply ........................................................................... |
11 |
|
|
2.2 |
Parent Unit Power Supply ........................................................................ |
12 |
|
|
2.3 |
Registration (Pairing) ................................................................................ |
14 |
|
3. Using the Baby Monitor.......................................................................... |
15 |
|||
|
3.1 |
Setting Up ................................................................................................. |
15 |
|
|
3.2 |
Pan and Tilt ............................................................................................... |
15 |
|
|
3.3 |
Night Vision Mode .................................................................................... |
15 |
|
|
3.4 |
Talk Mode................................................................................................. |
15 |
|
|
3.5 |
Video ON/OFF ........................................................................................ |
15 |
|
|
3.6 |
Temperature Display (HH °C / °F or LL °C / °F) ..................................... |
16 |
|
4. Parent Unit Menu Options ...................................................................... |
17 |
|||
|
4.1 |
Volume |
..................................................................................................... |
17 |
|
4.2 |
Brightness ................................................................................................. |
17 |
|
|
4.3 |
Lullaby ...................................................................................................... |
|
17 |
|
4.4 |
Zoom ........................................................................................................ |
|
17 |
|
4.5 |
Alarm ......................................................................................................... |
|
17 |
|
4.6 |
Camera .......................................................................................Control |
18 |
|
|
|
4.6.1 .................................................................. |
Add (pair) a camera |
18 |
|
|
4.6.2 ........................................................................... |
View a camera |
18 |
|
|
4.6.3 ........................................................................ |
Delete a camera |
19 |
|
|
4.6.4 ............................................................................. |
Scan camera |
19 |
|
4.7 |
Temperature ............................................................................................ |
19 |
|
|
4.8 |
Power Saving .................................................................................Mode |
20 |
|
|
4.9 |
View multiple ...........................................................cameras on screen |
20 |
|
5. |
Wi-Fi® Internet .........................................................................Viewing |
21 |
||
|
5.1 |
Minimum .............................................................System Requirements |
21 |
|
|
5.2 |
Getting ....................................................Started - Connecting Devices |
22 |
|
|
|
5.2.1 ......................................................................................... |
Setup |
22 |
|
5.3 |
User Account ......................and Camera Setup on Android™ Devices |
23 |
|
|
|
5.3.1 ...................................... |
Power ON and Connect the Camera |
23 |
|
|
5.3.2 ........................ |
Download Hubble for Motorola Monitors App |
23 |
|
|
5.3.3 |
Run Hubble for Motorola Monitors App on Android™ |
|
|
|
........................................................................................ |
device |
23 |
|
|
5.3.4 ............................................. |
Add the Camera to your account |
24 |
|
5.4 |
User Account ............................and Camera Setup on iPhone®/iPad® |
27 |
|
|
|
5.4.1 ...................................... |
Power ON and Connect the Camera |
27 |
6 |
Table of contents |
|
|
|
|
5.4.2 |
Download Hubble for Motorola Monitors App |
........................27 |
|
|
5.4.3 |
Run Hubble for Motorola Monitors App on iPhone®/iPad® ...27 |
|
|
|
5.4.4 |
Add the Camera to your account............................................. |
28 |
|
5.5 |
Camera Functions: ................................................................................... |
33 |
|
|
|
5.5.1 |
Connecting the Camera Unit to power ................................... |
33 |
|
|
5.5.2 |
Overview of the Features on Hubble App............................... |
33 |
|
5.6 |
Working with PC/Notebook .................................................................... |
36 |
|
|
5.7 |
Procedure for Resetting the Camera ...................................................... |
36 |
|
6. |
Disposal of the Device (Environment) ................................................... |
37 |
||
7. |
Cleaning .................................................................................................. |
|
38 |
|
8. |
Help |
......................................................................................................... |
|
39 |
9. |
General ...............................................................................Information |
47 |
||
10. Technical .........................................................................Specifications |
52 |
ENGLISH
Table of contents |
7 |
|
|
WARNING:
Strangulation Hazard: Children have STRANGLED in cords. Keep this cord out of the reach ofchildren(morethan 3ft away). Never use extension cords with AC Adapters. Only use the AC Adapters provided.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
8 |
|
|
|
Safety Instructions |
|
|
|
|
|
CAMERA SET UP & USE:
•Choose a location for the Baby Unit that will provide the best view of your baby in their crib.
•Place the Baby Unit on a flat surface, such as a dresser, desk, or shelf or mount the Unit on a suitable Tripod or Stargrip using the screw mount on the underside of the stand.
•NEVER place the Baby Unit or cords in the crib or within reach of the baby (the unit and cords should be more than 3 feet away).
WARNING
This digital video Baby Monitor is compliant with all relevant standards regarding electromagnetic fields and is, when handled as described in the User's Guide, safe to use. Therefore, always read the instructions in this User's Guide carefully before using the device.
•Adult assembly is required. Keep small parts away from children when assembling.
•This product is not a toy. Do not allow children to play with it.
•This Baby Monitor is not a substitute for responsible adult supervision.
•Keep this User’s Guide for future reference.
•Do not place the Baby Unit or cords in the crib or within reach of the baby (the unit and cords should be more than 3 feet away)
•Keep the cords out of reach of children.
•Do not cover the Baby Monitor with a towel or blanket.
•Never use extension cords with power adapters. Only use the power adapters provided.
•Test this monitor and all its functions so that you are familiar with it prior to actual use.
•Do not use the Baby Monitor near water.
•Do not place the Baby Monitor near a heat source.
•Only use the chargers and power adapters provided. Do not use other chargers or power adapters as this may damage the device and battery pack.
ENGLISH
Safety Instructions |
9 |
|
|
• Do not touch the plug contacts with sharp or metal objects.
CAUTION
The Parent Unit includes a built-in, lithium-ion rechargeable battery pack, which is not a user-accessible item. If you think the battery needs replacing, please contact the helpline. Do not try to replace it yourself.
Risk of explosion if battery is replaced by an unapproved battery type. Dispose of used batteries according to their instructions.
10 |
Safety Instructions |
|
|
ENGLISH
1.Connect the micro USB plug of the power adapter to the Baby Unit (camera) and the other end to a suitable electrical outlet.
NOTE
Only use the enclosed Power Adapter (5V DC / 1500mA).
2.Slide the POWER ON/OFF switch to the ON position to turn the Baby Unit on.
3.Slide the POWER ON/OFF switch to the OFF position to turn the Baby Unit off.
IMPORTANT
The Baby Unit is able to operate without AC power for up to 3 hours with the support of the built-in rechargeable battery (Ni-MH battery 2.4V, 900mAh). Please charge the unit for at least 16 hours before first time use. The battery is not a user-accessible item. Please contact the helpline if you think it needs replacing.
Getting Started |
11 |
|
|
IMPORTANT
The Parent Unit is assembled with a built-in rechargeable battery pack (Lithium ion battery 1880mAh, to give up to 5 hours monitor operation), please charge it for 16 hours before initial use. The battery is not a user-accessible item. Please contact the helpline if you think it needs replacing.
1.Connect the micro USB plug of the power adapter to the Parent Unit and the other end to a suitable electrical outlet. Only use the enclosed power adapter (5V DC / 1500mA) with the micro USB plug.
2.Press and hold the 0POWER ON/OFF button for 3 seconds to switch ON the Parent Unit, if it has not turned on automatically.
3.Once the Baby and Parent Units are switched on, the display on the Parent Unit will show the color video captured by the Baby Unit. If the baby's room
is dark, the video will display in black and white, with a icon showing, due to the infra-red illumination by the Baby Unit.
4.If there is no connection or you are out of range, the video display will go
off, a symbol will appear on the screen, and the Parent Unit will beep repeatedly. Move the Parent Unit closer to the Baby Unit until the link is reestablished.
5.Press and hold the 0 POWER ON/OFF button, until the progress bar finishes scrolling, to turn OFF the Parent Unit.
NOTE
The battery icon turns RED to indicate the battery is low and the parent unit will beep every 15 seconds. This alert user that the battery needs to be charged. The parent unit will take 16 hours to charge fully.
12 |
Getting Started |
|
|
When charging |
ENGLISH |
|
1. |
If the Parent Unit is turned OFF with the adapter plugged in, a 2-pin plug |
|
|
logo will appear on-screen for about 5 seconds, and then a flashing battery |
|
|
|
|
|
logo will display for 15 seconds. The Blue LED at the top left will light up; |
|
|
indicating that the adapter is plugged in and charging is continuing. |
|
2. |
While the power is ON and the adapter is plugged in, the battery icon at |
|
|
||
|
the top right corner of the screen will show that the battery is charging. The |
|
|
Charging LED at the top left of the Parent Unit will light up blue to indicate |
|
|
that the adapter is plugged in. |
|
Getting Started |
13 |
|
|
The Baby Monitor is pre-registered to your Parent Unit. You do not need to register it again unless the Baby Unit loses its link with the Parent Unit.
To re-register your Baby Unit, or register a new Baby Unit, follow the procedures below:
1.Press the Mbutton of the Parent Unit and the menu bar will pop up.
2.Press the < LEFT button or >RIGHT button until is highlighted, and
the del/
add/
view/
scan menu will pop up.
3.Press the +UP button or -DOWN button to select add, and press the O button to confirm.
4.Camera _ _ _
will pop up, press the + UP button or -DOWN button to select the desired Camera, and press the Obutton to start searching for a camera unit, with "press PAIR on cam" shown.
Note: If a camera is currently paired with the Parent Unit, its camera location (with a * against it) cannot be selected for a new registration.
5.Press and hold the PAIR button on the underside of the Baby Unit until the Parent Unit finds the camera, beeps and PAIR OK appears on the screen. The video from the camera will then appear.
NOTE
If a particular Baby Unit was registered previously, registering this current Baby Unit again will cancel its old registration.
14 |
Getting Started |
|
|
•Place the Baby Unit in a convenient location (e.g. on a table) and point the camera lens towards the area you want to monitor.
•Adjust the angle of the Baby Unit's camera by using the pan and tilt function (the arrows on the right and left side of the Parent Unit) to move up, down, left, and right until you are satisfied with the image shown on the Parent Unit
NOTE
Do not place the Baby Unit within the baby's reach! If there is interference with the picture or sound, try moving the units to different locations, and ensure they are not close to other electrical equipment.
The camera can be remotely controlled from the Parent Unit when in a camera viewing mode.
1.Press the +UP button or - DOWN button on the left side of the Parent Unit to tilt the camera up or down.
2.Press the <LEFT button or >RIGHT button on the right side of the Parent Unit to pan the camera left or right.
The Baby Unit has 8 high-intensity infrared LEDs for picking up clear images in the dark. When the built-in photo sensor on the top of the Unit detects a low level of ambient light, the LEDs will automatically activate and the screen on the Parent Unit will display in black and white. The icon will be displayed at the top of the Parent Unit screen.
Press and hold the TALK button Ton the Parent Unit to talk to your baby through the Baby Unit’s loudspeaker. The Twill be displayed at the top center of the Parent Unit screen.
ENGLISH
Using the Baby Monitor |
15 |
|
|
Press V VIDEO On/Off button to turn the LCD screen on or off, while still leaving the audio monitor on.
The temperature reading from the temperature sensor at the back of the Baby Unit will be displayed at the top left of the LCD screen in °C or °F (see 4.7 “Temperature scale” for how to change). The readings will turn RED if the temperature goes above 29°C / 84°F or below 14°C / 57°F. The reading will change to HH °C / °F if the temperature goes above 36°C / 97°F. The reading will change to LL °C / °F if the temperature goes below 1°C / 34°F.
The temperature reading updates about every minute.
16 |
Using the Baby Monitor |
|
|
1.Press the Volume button - or + to adjust the volume level. The icon will pop up and you can select the desired volume from level 0 - 8. (The default
volume level setting is level 5, and level 0 is OFF .)
1.Press the M button and the menu bar will pop up.
2.Press the <LEFT button or > RIGHT button until is highlighted.
3.Press the +UP button or -DOWN button to select the desired brightness from level 1 - 8. (The default brightness is level 4.)
4.Press the Mbutton to close the menu bar.
1.Press the M button and the menu bar will pop up.
2.Press the <LEFT button or > RIGHT button until is highlighted.
3.Press the +UP button or -DOWN button to select from the 5 sounds available. If a sound is selected, it will repeat continuously until it is deselected or the TALK button is pressed. (The default setting is lullaby OFF.)
4.Press the Mbutton to close the menu bar.
1.Press the M button and the menu bar will pop up with highlighted.
2.Press the +UP button or -DOWN button to select 1X or 2X zoom. (The default setting is 1X.)
1.Press the M button and the menu bar will pop up.
2.Press the <LEFT button or > RIGHT button until is highlighted.
3.Press the +UP button or -DOWN button to select the alarm time (6h, 4h,
2h). The icon will appear on the upper right of the Parent Unit screen when alarm is on. (The default setting is Alarm OFF.)
ENGLISH
Parent Unit Menu Options |
17 |
|
|