Binatone Electronics MBP854V3PU, MBP85 Users Manual
User’s Guide
Digital Video Baby Monitor
Models: MBP854CONNECT, MBP854CONNECT-2,
MBP854CONNECT-3, MBP854CONNECT-4
The features described in this User’s Guide are subject to modifications without prior notice.
Welcome...
to your new Motorola Digital Video Baby Monitor!
Thank you for purchasing your new Motorola Digital Video Baby Monitor.
Now you can see and hear your baby sleeping in another room or you can
monitor your older children in their playroom.
Please retain your original dated sales receipt for your records.
For warranty service of your Motorola product, you will need to provide a
copy of your dated sales receipt to confirm warra nty status. Registration is
not required for warranty coverage.
For product related questions, please call:
US and Canada 1-888-331-3383
Email: support@motorolahome.com
On the Web: www.motorolahome.com
This User's Guide provides you with all the information you need to get the
most from your product.
Before you can use the Baby Monitor, we recommend you fully charge the
battery in the Parent Unit, so that it continues to work if you disconnect it
from the power supply to carry it to another location. Please read the
Safety Instructions on page 8 before you install the units.
Got everything?
• 1 x Parent Unit
• 1 x Baby Unit (Camera)
• 1 x Power adapter for the Parent Unit
• 1 x Power adapter(s) for the Baby Unit
In multi-camera packs, you will find one or more additional camera units
with power adapter units and battery packs.
Overview of the Parent Unit
RESET
111413
12
16
15
21
2
3
4
5
6
1. Display (LCD screen)
2. Video ON/OFF Key V
Press to turn the LCD display ON/
OFF
3. Tal k Key T
Press and hold to speak to your baby
4. Up Key +
Normal Mode: Tilt Up
Menu Mode: Up
5. Down Key -
Normal Mode: Tilt Down
Menu Mode: Down
6. Microphone
7. Menu Key M
Press to open the Menu options
8. OK Key O
9. Left Key <
Normal Mode: Pan Left
Menu Mode: Left
10. Right Key >
Normal Mode: Pan Right
Menu Mode: Right
7
8
9
10
1
20
17
19
18
11. Power Adapter / B attery LED BLUE
when connected to an electrical
outlet.
RED when battery low.
12. Unit ON/OFF LED (Green)
13. Audio Level LED (Green, Orange,
Red)
14. Power Key 0
Press and Hold to turn the unit ON/
OFF
15. Volu me K ey
Press -/+ to decrease/increase
Volume level on Parent Unit
16. Reset Key
17. SD Card socket
18. Micro USB Socket
19. Stand
20. Speaker
21. Antenna
Raise the antenna for optimal
reception
Parent Unit menu icons
Signal Level (4 Levels)
Night Vision Mode (Screen changes to Black/White)
Tal k M od e
Battery Level Control (4 Levels)
Pan Left
Pan Rig ht
Tilt Up
Tilt Down
Zoom Level Control (1X, 2X)
Brightness Level Control (8 Levels)
Lullaby Control (5 Song Selections)
Alarm Setting (6h, 4h, 2h, Off)
Temperature Reading (HH ºC / ºF or LL ºC / ºF)
Icon & readings turn RED > 29ºC / 84ºF, and reading display
HH ºC / ºF > 36ºC / 97 ºF
Icon & readings turn RED < 14ºC / 57ºF, and reading display
LL ºC / ºF < 1ºC / 34 ºF
Camera Control (scan, view, add, delete)
Local Recordi ng (Record, Play)
Set Video On Timer (5 min, 30 min, 60 min)
Time Setting (Date, Time format 12/24 Hour and Time)
Volume Level Control (8 Levels)
SD Card detection
No Baby Unit detected
Overview of Your Baby Unit
1
2
3
4
5
6
7
5V 1.5A
1. Light Sensor (for night mode detection) 7. Speaker
2. Camera Lens 8. Antenna
3. Infrared LEDs (for night vision) 9. Micro USB socket
4. Power / Status indicator 10. ON/OFF Switch
5. Microphone 11. Temperature Sensor
6. PAIR Button
Important guidelines for installing your Baby Monitor
• To use your Video Monitor Baby and Parent Units together, you must be able to establish a
radio link between them, and the range will be affected by environmental conditions.
• Any large metal object, like a refrigerator, a mirror, a filing cabinet, metallic doors or
reinforced concrete between the Baby and Parent Unit may block the radio signal.
• The signal strength may also be reduced by other solid structures, like walls, or by radio
or electrical equipment, such as TVs, computers, cordless or mobile phones,
fluorescent lights or dimmer switches.
• Use of other 2.4 GHz products, such as wireless networks (Wi-Fi
systems, or microwave ovens, may cause interference with this product, so keep the
Baby Monitor away at least 3ft from these types of products, or turn them off if they
appear to be causing interference.
• If the signal is weak, try raising the Parent Unit's Antenna, moving the Parent and/or the
Baby Unit to different positions in the room(s).
®
routers), Bluetooth®
8
9
10
11
Table of contents
1. Safety Instructions..................................................................................... 8
2. Getting Started........................................................................................11
2.1 Baby Unit Power Supply............................................................................ 11
2.2 Parent Unit Power Supply......................................................................... 11
2.3 Registration (Pairing) ................................................................................ 13
3. Using the Baby Monitor...........................................................................14
3.1 Setting up .................................................................................................. 14
3.2 Pan and Tilt................................................................................................ 14
3.3 Night Vision Mode .................................................................................... 14
3.4 Talk Mode.................................................................................................. 14
3.5 Video ON/OFF .........................................................................................14
3.6 Temperature Display (HH °C / °F or LL °C / °F)...................................... 15
4. Parent Unit Menu Options ......................................................................16
4.1 Volume ...................................................................................................... 16
4.2 Brightness.................................................................................................. 16
4.3 Lullaby ....................................................................................................... 16
4.4 Zoom ......................................................................................................... 16
4.5 Alarm .........................................................................................................16
4.6 Camera Control........................................................................................ 17
4.6.1 Add (pair) a camera .................................................................. 17
4.6.2 View a camera ...........................................................................17
4.6.3 Delete a camera ........................................................................ 18
4.6.4 Scan camera .............................................................................. 18
4.7 Temperature ............................................................................................. 18
4.8 Power Saving mode.................................................................................. 18
4.9 Video ......................................................................................................... 19
4.10 Time Setting .............................................................................................. 19
6 Table of contents
5. Wi-Fi Internet Viewing ............................................................................20
5.1 Minimum System Requirements ..............................................................20
5.2 Getting started - Connecting Devices .....................................................21
5.3 User Account and Camera Setup on Android™ Devices .......................22
5.3.1 Power ON and Connect the Camera ......................................22
5.3.2 Download Hubble for Motorola Monitors App ........................22
5.3.3 Run Hubble for Motorola Monitors App on Android™
device ........................................................................................22
5.3.4 Add the Camera to your account .............................................23
5.4 User Account and Camera Setup on iPhone
5.4.1 Power ON and Connect the Camera ......................................26
5.4.2 Download Hubble for Motorola Monitors App ........................26
5.4.3 Run Hubble App on your iPhone®/iPad® ................................26
5.4.4 Add the Camera to your account .............................................27
®
/iPad®.............................26
6. Camera Functions................................................................................... 32
6.1 Connecting the Camera Unit to power ...................................................32
6.2 Overview of the Features on Hubble App ...............................................32
7. Working with PC/Notebook...................................................................35
8. Disposal of the Device (Environment)....................................................36
9. Cleaning ..................................................................................................37
10. Help..........................................................................................................38
11. General Information ................................................................................46
12. Technical Specifications .........................................................................52
ENGLISH
Table of contents 7
1. Safety Instructions
WARNING:
Strangulation Hazard: Children have
STRANGLED in cords. Keep this cord
out of the reach of children (more than
3ft (1m) away). Never use extension
cords with AC Adapters. Only use the AC
Adapters provided.
8 Safety Instructions
WARNING
Baby Unit SET UP & USE:
• Choose a location for the Baby Unit that will provide the best view of
your baby in their crib.
• P lace t he Bab y Unit o n a fla t sur face, such a s a dre sser, desk, or she lf or
mount the Unit to a wall securely using the keyhole slots on the
underside of the stand.
• NEVER place the Baby Unit or cords inside your child's crib.
• Do not place the Baby Unit or cords in the crib or within reach of the
baby (the unit and cords should be more than 3 feet away).
This digital video Baby Monitor is compliant with all relevant standards
regarding electromagnetic fields and is, when handled as described in the
User's Guide, safe to use. Therefore, always read the instructions in this User's
Guide carefully before using the device.
• Adult assembly is required. Keep small parts away from children when
assembling.
• This product is not a toy. Do not allow children to play with it.
• This Baby Monitor is not a substitute for responsible adult supervision.
• Keep this User’s Guide for future reference.
• Do not place the Baby Unit or cords in the crib or within reach of the baby
(the unit and cords should be more than 3 feet away)
• Keep the cords out of reach of children.
• Do not cover the Baby Monitor with a towel or blanket.
• Never use extension cords with power adapters. Only use the power
adapters provided.
• Test this monitor and all its functions so that you are familiar with it prior to
actual use.
• Do not use the Baby Monitor near water.
Safety Instructions 9
ENGLISH
• Do not place the Baby Monitor near a heat source.
• Only use the chargers and power adapters provided. Do not use other
chargers or power adapters as this may damage the device and battery
pack.
• Do not touch the plug contacts with sharp or metal objects.
CAUTION
Risk of explosion if battery is replaced by an unapproved battery type.
Dispose of used batteries according to their instructions.
FCC/IC RF Radiation Exposure Statement Caution: This Transmitter must be
installed to provide a separation distance of at least 20 cm from all persons.
IC Radiation Déclaration d'exposition Attention: Cet émetteur doit être
installé pour fournir une distance de séparation d'au moins 20 cm de toute
personne.
10 Safety Instructions
2. Getting Started
Switch to turn ON
the camera
Power adapter plug
2.1 Baby Unit Power Supply
ON OFF
1. Connect the small plug of the power adapter to the Baby Unit (camera) and
the other end to a suitable electrical outlet.
NOTE
Only use the enclosed power adapter (5V DC / 1500mA).
2. Slide the ON/OFF switch to the ON position. The power LED will light up
in blue.
3. Slide the ON/OFF switch to the OFF position to turn the Baby Unit off.
2.2 Parent Unit Power Supply
IMPORTANT
The Parent Unit is assembled with a built-in rechargeable battery pack (Lithiumion battery 1880mAh), please charge it for 16 hours before use.
1. Connect the micro USB plug of the power adapter to the Parent Unit and
the other end to a suitable electrical outlet. Only use the enclosed power
adapter (5V DC / 1500mA) with the micro USB plug.
ENGLISH
Getting Started 11
2. Press and hold the 0 POWER ON/OFF button for 1 second to turn ON the
Parent Unit.
3. Once the Baby and Parent Units are switched on, the display on the Parent
Unit will show the video captured by the Baby Unit.
4. If there is no connection or you are out of range, the video display will turn
5. off and the unit will beep every 5 seconds. Move the Parent Unit closer to
6. the Baby Unit until the link is re-established.
7. Press and hold the
0 POWER ON/OFF button, until the progress bar
finishes scrolling, to turn OFF the Parent Unit.
NOTE
The battery icon turns RED to indicate that the battery is low, and the
parent unit will beep every 15 seconds. The battery needs to be recharged; it
will take12 hours to charge fully.
When charging
1. Whilst the power is OFF, and the adapter is plugged in, an adapter logo will
appear on-screen and a flashing battery logo will display for 15 seconds. The
Blue LED at the top left corner will light up; indicating that the adapter is
plugged in.
2. Whilst the power is ON, and the adapter is plugged in, the battery icon at
the top right corner of the screen will show that the battery is charging. The
Blue LED at the top left corner will light up to indicate that the adapter is
plugged in.
12 Getting Started
2.3 Registration (Pairing)
The Baby Monitor is pre-registered to your Parent Unit. You do not need to
register it again unless the Baby Unit loses its link with the Parent Unit.
To re-register your Baby Unit, or register a new Baby Unit, follow the procedures
below:
1. Press the
2. Press the
the
3. Press the
O button to confirm.
4. Camera
button to select the desired Camera and press the
searching for a camera unit. The green audio level LED will flash rapidly
while searching.
5. Press the
6. Press and hold the PAIR button underneath the Baby Unit until the Parent
Unit finds the camera, beeps and the video from the camera appears.
NOTE
If a particular Baby Unit was registered previously, registering this current
Baby Unit again will overwrite the old registration.
M button of the Parent Unit and the menu bar will pop up.
< LEFT button or > RIGHT button until is highlighted, and
del/ add/ view/ scan
+ UP button or - DOWN button to select
will pop up, press the + UP button or - DOWN
menu will pop up.
add
, and press the
O button to start
O button to confirm.
ENGLISH
Getting Started 13
3. Using the Baby Monitor
3.1 Setting up
• Place the Baby Unit in a convenient location (e.g. on a table) and point the
camera lens towards the area you want to monitor.
• Adjust the angle of the Baby Unit's head by rotating the camera up, down, left
and right until you are satisfied with the image shown on the Parent Unit.
NOTE
Do not place the Baby Unit within the baby's reach! If there is interference with
the picture or sound, try moving the units to different locations, and ensure they
are not close to other electrical equipment.
3.2 Pan and Tilt
The camera can be remotely controlled from the Parent Unit.
1. Press the
2. Press the
3.3 Night Vision Mode
The Baby Unit has 8 high-intensity infrared LEDs for picking up clear images in
the dark. When the built-in photo sensor on the top of the unit detects a low level
of ambient light, the LEDs will automatically activate and the screen on the
Parent Unit will display in black and white. The icon will be displayed at the
top of the screen.
3.4 Talk Mode
Press and hold the T TALK button on the Parent Unit to talk to your baby through
the Baby Unit’s loudspeaker. The
screen.
3.5 Video ON/OFF
Press V VIDEO ON/OFF key to turn the LCD display on or off, whilst still
leaving the audio monitor on.
+ UP button or - DOWN button to tilt up or down.
< LEFT button or > RIGHT button to pan left or right.
T icon will be displayed at the top of the LCD
14 Using the Baby Monitor
3.6 Temperature Display (HH °C / °F or LL °C / °F)
The temperature reading from the temperature sensor at the back of the Baby
Unit will be displayed at the top of the LCD screen. The readings will turn RED if
the temperature goes above 29°C / 84°F or below 14°C / 57°F. The reading will
change to HH °C / °F if the temperature goes above 36°C / 97°F. The reading
will change to LL °C / °F if the temperature goes below 1°C / 34°F.
ENGLISH
Using the Baby Mon itor 15
4. Parent Unit Menu Options
4.1 Volume
1. Press the Volume button - or + to adjust the volume level, the icon will
pop up and you can select the desired volume level from level 0~8. (The
default volume level setting is level 4.)
4.2 Brightness
1. Press the M button and the menu bar will pop up.
2. Press the
3. Press the
level from level 1 ~ 8. (The default brightness level setting is level 5.)
4.3 Lullaby
1. Press the M button and the menu bar will pop up.
2. Press the
3. Press the
the 5 lullabies available, or the cycle option to play all 5 songs in turn. If an
individual song is selected it will only play once. (The default setting is
lullaby OFF.)
4.4 Zoom
1. Press the M button and the menu bar will pop up.
2. Press the
3. Press the
(The default setting is 1X.)
4.5 Alarm
1. Press the M button and the menu bar will pop up.
2. Press the
3. Press the
2h
4. If an alarm time is selected, the Parent Unit will beep for about 45 seconds
after every 6, 4 or 2 hour period.
< LEFT button or > RIGHT button until is highlighted.
+ UP button or - DOWN button to select the desired brightness
< LEFT button or > RIGHT button until is highlighted.
+ UP button or - DOWN button to select the desired song from
< LEFT button or > RIGHT button until is highlighted.
+ UP button or - DOWN button to select the
1X
< LEFT button or > RIGHT button until is highlighted.
+ UP button or - DOWN button to select the alarm time (
). (The default setting is Alarm OFF.)
or 2X Zoom.
6h, 4h
,
16 Parent Unit Menu Options
4.6 Camera Control
4.6.1 Add (pair) a camera
1. Press the M button and the menu bar will pop up.
2. Press the
the
3. Press the
O button to confirm.
4. Camera will pop up, press the
button to select the desired Camera, and press the
searching for a camera unit. The green audio level LED will flash rapidly
while searching.
5. Press and hold the
Parent Unit finds the camera, beeps and the picture from the camera appears.
NOTE
A camera can only be registered to one Parent Unit at any one time.
4.6.2 View a camera
1. Press the M button and the menu bar will pop up.
2. Press the
the
3. Press the
O button to confirm.
4. Camera will pop up, press the
button to select the desired camera, and press the
picture from that camera.
TIP
Quick Method to View Cameras instead of entering into the menu bar.
Directly press OK repeatedly to select Camera ,
< LEFT button or > RIGHT button until is highlighted, and
del/ add/ view/ scan
+ UP button or - DOWN button to select
menu will pop up.
add
, and press the
+ UP button or - DOWN
O button to start
PAI R
button on the underside of the Baby Unit until the
< LEFT button or > RIGHT button until is highlighted and
del/ add/ view/ scan
+ UP button or - DOWN button to select
menu pops up.
view
, and press the
+ UP button or - DOWN
O button to view the
scan
ENGLISH
.
Parent Unit Menu Options 17
Loading...