Binatone Electronics MBP41SPU User Manual
User’s Guide
Digital Video Baby Monitor
Models: MBP41S, MBP41S-2, MBP41S-3, MBP41S-4
The features described in this User’s Guide are subject to modifications without prior notice.
Welcome...
to your new Motorola Digital Video Baby Monitor!
Thank you for purchasing the Digital Video Baby Monitor. Now you can view
and hear your baby sleeping in another room or you can monitor your older
children in their play room.
Please retain your original dated sales receipt for your records. For
warranty service of your Motorola product, you will need to provide a copy
of your dated sales receipt to confirm warranty status. Registration is not
required for warranty coverage.
For product-related questions, please call:
US and Canada 1-888-331-3383
Email: support@motorolamonintors.com
This User's Guide provides you with all the information you need to get the
most from your product.
Before you use the digital video baby monitor, we recommend that you
insert and fully charge the battery in the Parent Unit, so that it continues to
work if you disconnect it from the electrical outlet to carry it to another
location. Please read the Safety Instructions on page 6 before you install
the units.
Got everything?
• 1 x Parent unit
• 1 x Baby unit (Camera)
• 1 x Rechargeable Ni-MH battery pack for the Parent Unit
• 1 x Power adapter for Parent Unit
• 1 x Power adapter for Baby Unit
In packs with multi Baby Units, you will find one or more additional Baby
Units with power adapters.
Overview of the Parent Unit
110 11
12
14
2
3
4
5
13
1. LCD displ ay
2. Up Key +
Normal Mode: Tilt Up
Menu Mode: Up
3. Down Key -
Normal Mode: Tilt Down
Menu Mode: Down
4. Left Key <
Normal Mode: Pan Left
Menu Mode: Left
5. Right Key >
Normal Mode: Pan Right
Menu Mode: Right
6. Menu Key
M
Press to open the Menu options
7. OK Key
8. Video ON/OFF Key V
O
Press to turn OFF the LCD display
Press again to turn ON the LCD display
Parent unit menu icons
Signal Level (4 Levels)
Night Vision Mode (Screen changes to Black/White)
Tal k M o d e
T
Battery Level Control (4 Levels)
Volume Level Control (8 Levels)
Zoom Level Control (1X, 2X)
Brightness Level Control (8 Levels)
&
Lullaby Control (5 Song Selections)
m
15
6
7
16
8
9
17
9. Tal k K ey T
Press and hold to speak to your baby
10. Power Adapter / Battery LED
BLUE when the adapter is powered on.
RED when battery low.
11. Unit ON/OFF LED (Green)
12. Audio Level LED (Green, Orange, Red,
Red)
13. Microphone
14. Power Key P
Press and Hold to turn the unit ON/OFF
15. Antenna
Lift the antenna for optim al reception
16. Battery cover
17. Stand
18. Speaker
19. USB power adapter socket
19
18
Parent unit menu icons (cont’d)
Alarm Setting (6h, 4h, 2h, Off)
Temperature Reading (HH ºC / ºF or LL ºC / ºF)
Icon & readings turn RED > 29ºC / 84ºF, and flashing when
reading > 36ºC / 97ºF)
Icon & readings turn RED < 14ºC / 57ºF, and flashing when
reading < 1ºC / 34ºF)
Cam Control (scan, view, add, delete)
Set Video On Timer (5min, 30min, 60min)
V
Overview of the Baby Unit
1. Photo Sensor (Night Vision
Mode)
2. Camera Lens
3. Infrared LEDs
4. Power LEDs
5. Microphone
6. Speaker
7. ON/OFF Switch
8. Power Adapter Socket
9. Antenna
10. Temperature Sensor
11. Pair Key
Important guidelines for installing your digital video baby monitor
• To use your Baby Unit and Parent Unit together, you must be able to establish a radio
link between them, and the range will be affected by environmental conditions.
• Any large metal object, like a refrigerator, a mirror, a filing cabinet, a metallic door or
reinforced concrete, between the Baby Unit and Parent Unit may block the radio
signal.
• The signal strength may also be reduced by other solid structures, like walls, or by
radio or electrical equipment, such as TVs, computers, cordless or mobile phones,
fluorescent lights or dimmer switches.
• Use of other 2.4 GHz products, such as wireless networks (Wi-Fi
Bluetooth
®
systems, or microwave ovens, may cause interference with this product,
so keep the baby monitor away at least 5ft (1.5m) from these types of products, or turn
them off if they appear to be causing interference.
• If the signal is poor, try lifting up the Parent Unit Antenna, or moving the Parent Unit
and/or the Baby Unit to different positions in the rooms.
®
routers),
Table of contents
1. Safety Instructions..................................................................................... 6
2. Getting Started..........................................................................................9
2.1 Baby Unit Power Supply..............................................................................9
2.2 Parent Unit Battery Installation....................................................................9
2.3 Parent Unit Power Supply .........................................................................10
2.4 Registration (Pairing).................................................................................11
3. Using the Digital Video Baby Monitor ....................................................12
3.1 Setting up...................................................................................................12
3.2 Night Vision Mode.....................................................................................12
3.3 Talk Mode..................................................................................................12
3.4 Video ON/OFF..........................................................................................12
3.5 Temperature Display (HH °C / °F or LL °C / °F)......................................12
4. Parent Unit Menu Options.......................................................................13
4.1 Volume.......................................................................................................13
4.2 Zoom..........................................................................................................13
4.3 Brightness ..................................................................................................13
4.4 Lullaby........................................................................................................13
4.5 Alarm..........................................................................................................13
4.6 Temperature..............................................................................................14
4.7 Camera Control ........................................................................................14
4.8 Power Saving Mode..................................................................................16
5. Disposal of the Device (environment)....................................................17
6. Cleaning ..................................................................................................18
7. Troubleshooting......................................................................................19
8. General Information ................................................................................21
9. Technical Specifications .........................................................................27
ENGLISH
Table of contents 5
1. Safety Instructions
WARNING:
Strangulation Hazard. Children have
STRANGLED in cords. Keep this cord out
of the reach of children (more than 3ft
(1m) away). Never use extension cords
with AC Adapters. Only use the AC
Adapters provided.
6 Safety Instructions
CAMERA SET UP & USE:
• Determine a location for the Baby Unit that will provide the best view of
your baby in his/her crib.
• Place the Baby Unit on a flat surface, such as a dresser, bureau or shelf,
or mount the Unit on a wall securely using the keyhole slots under the
stand.
• NEVER place the Baby Unit or cords within the crib.
• Do not place the Baby Unit or cords in the crib or within reach of the
baby (the unit and cords should be more than 3 feet away).
WARNING
This Digital Video Baby Monitor is compliant with all relevant standards
regarding electromagnetic fields and is, when handled as described in the
User's Guide, safe to use. Therefore, always read the instructions in this User's
Guide carefully before using the device.
• Adult assembly is required. Keep small parts away from children when
assembling.
• This product is not a toy. Do not allow children to play with it.
• This Digital Video Baby Monitor is not a substitute for responsible adult
supervision.
• Keep this user's guide for future reference.
• Keep the cords out of reach of children.
• Do not cover the Digital Video Baby Monitor with a towel or blanket.
• Test this monitor and all its functions so that you are familiar with it prior to
actual use.
• Do not use the Digital Video Baby Monitor in damp areas or close to water.
• Do not install the Digital Video Baby Monitor in extreme cold or heat, direct
sunlight, or close to a heat source.
• Only use the chargers and power adapters provided. Do not use other
chargers or power adapters as this may damage the device and battery
pack.
• Only insert a battery pack of the same type.
ENGLISH
Safety Instructions 7
• Do not touch the plug contacts with sharp or metal objects.
• Connect the power adapters to easily accessible electrical outlets.
CAUTION
There is a risk of explosion if the battery is replaced by an incorrect type.
Only use a Ni-MH rechargeable battery pack with rating: 3.6V, 900mAh.
Dispose of used batteries according to the instructions.
8 Safety Instructions
2. Getting Started
DC JACK
DC PLUG
DC Jack
DC Plug
Red
Black
Small cross head or flat
end screwdriver
2.1 Baby Unit Power Supply
1. Connect the DC plug of the power adapter to the DC jack at the bottom of
the Baby Unit and the other end to the electrical outlet.
NOTE
Only use the supplied power adapter (5V DC / 1000mA).
2. Slide the ON/OFF switch to the ON position.
The power LED will light up in green.
3. Slide the ON/OFF switch to the OFF position to turn the Baby Unit off.
2.2 Parent Unit Battery Installation
1. Insert the wire tabs of the rechargeable battery pack into the contact slots
as shown above and fit the battery pack into the compartment.
ENGLISH
Getting Started 9
Loading...