Binatone Electronics F50C, F50Z, F50T Users Manual

User’s Guide
WIRELESS FENCE PET TRAINING SYSTEM
Model: TRAVELFENCE50
The features described in this User's Guide are subject to modifications without prior notice.
Welcome...
to your new WIRELESS FENCE PET TRAINING SYSTEM
Thank you for purchasing the Wireless Fence Pet Training System. Your new Wireless Fence will provide years of freedom, convenience and safety for your dog while traveling away from home. First, be sure to install the Wireless Fence Pet Training System in a portion of your yard at home and teach your dog how to obey the invisible boundary zone before using in other locations. The purpose of the training steps on page 32 is to teach your dog how to avoid correction by respecting the warning beep and backing inside the boundary zone.
Please retain your original dated sales receipt for your records. For warranty service of your Motorola product, you will need to provide a copy of your dated sales receipt to confirm warranty status. Registration is not required for warranty coverage.
For product related questions, please call:
US and Canada 1-888-331-3383 Email: support@motorolamonitors.com
This User's Guide provides you with all the information you need to get the most from the product.
Please read and follow the instructions in this User’s Guide along with the Safety Instructions on page 10 before you using this product.
Got everything?
1 x Pet Collar Unit and Collar Strap
1 x Wireless Fence Unit
1 x Remote Control Unit
1 x Power Adapter (For Pet Collar Unit)
1 x Power Adapter (For Wireless Fence Unit)
1 x Rechargeable Battery Pack (for Wireless Fence Unit)
1 x Outdoor Stake and Ground Plug
50 x Boundary Flags
1 x Test Light for Collar Contacts
2 Pairs of Collar Contacts - Long & Short (For Pet Collar Unit)
1x Travel Carry Bag
Overview of the Pet Collar Unit
1 2
3
7
5 6
4
1. Pair Key
2. Power Key
Press and hold to turn the unit On. The unit vibrates once and the indicator LED lights up in green for 3 seconds. Press and hold to turn the unit Off. The unit vibrates twice and the indicator LED goes off.
3. Collar Contacts
4. Power Adapter Socket
5. Indicator LED
Lights up in green for 3 seconds when the unit is powered on and flashes slowly during standby.
6. Charging/Battery low LED
Lights up in blue when charging. Flashes in red when battery is low.
7. Speaker
Delivers tone or voice sent from the Remote Control Unit.
Lights up in green when delivering static correction.
Overview of the Wireless Fence Unit and Outdoor
1
2
4
5
3
6
7
Stake
1. Power Key
Press and hold to power on the unit. Press and hold to power off the unit. When the unit is powered on, short press to turn fencing mode on or off.
2. Left Key
Correction Mode: Decrease level Menu Mode: Move down
3. Right Key
Correction Mode: Increase level Menu Mode: Move up
4. Menu Key
Press to access menu options. Press again to exit.
5. OK Key
Press to select the desired option and lock the setting.
6. Outdoor Stake
Connect to the Wireless Fence Unit when using it outdoors.
7. Ground Plug
Pound into the ground when using it outdoors.
Overview of the Remote Control Unit
2 3
6
7
8
1
4
5
9
11
10
12
13
14
OK
1. Display (LCD screen)
2. OK Key
Press to select the desired option and lock the setting.
3. Menu Key
Press to access menu options, such as pairing, remove collar, etc.
4. Up Key
Correction Mode: Increase level Menu Mode: Move up
5. Down Key
Correction Mode: Decrease level Menu Mode: Move down
6. Tone Key
Press to send a tone to the Pet Collar Unit.
7. Vibration Key
Press to vibrate the Pet Collar Unit.
8. Static Correction Key
Press and hold to send static correction to the Pet Collar Unit.
9. Microphone
10. Antenna
11. Tal k k e y
Press and hold to convey verbal commands to your dog through the Pet Collar Unit.
12. Power Key
Press and hold to power the unit ON/OFF.
13. Battery Cover
14. Leash Clip
Symbols on the Remote Control and Wireless Fence Unit
RF signal strength of the Remote Control Unit against the Pet Collar Unit.
Displays when you enter Menu mode.
Alert indication on Collar 2 (battery low, out of range, etc).
Displays when Fencing mode is activated.
Battery level on the Remote Control Unit.
Pet Collar Number.
Select to REMOVE collar.
Select to PAIR collar.
Displays when STATIC CORRECTION KEY is pressed (Level 0 to 15). When 0 is displayed, only tone and vibration alerts are sent to the Pet
Collar Unit. Displays when TALK KEY is pressed.
Displays when VIBRATION KEY is pressed.
Displays when TONE KEY is pressed.
How the Wireless Fence Pet Training System works
The Wireless Fence Pet Training System comes with a portable Wireless Fence Unit that establishes an invisible boundary by transmitting radio signals to the Pet Collar Unit up to a distance of 50 yards line of sight. When your dog reaches the boundary zone (about 2 to 3 feet before the “real” boundary), the Pet Collar Unit that is worn on your dog emits a warning beep followed by static correction to get its attention until it backs away from the boundary zone. The Pet Collar Unit is equipped with a safety feature such that it will stop delivering static correction if your dog stays outside the boundary for more than 30 seconds.The boundary zone can be marked with Boundary Flags as a visual aid for your dog, especially during the training stage. The Wireless Fence Pet Training System also comes with a Remote Control Unit that is paired with the Pet Collar Unit. At the push of the
on the Remote Control Unit, a signal is sent to the Pet Collar Unit, which delivers static correction to your dog to discourage your dog from certain behaviors. The Remote Control Unit is also designed with a
KEY
and a
through the Pet Collar Unit.
TALK KEY
that allows you to give your dog verbal commands
STATIC CORRECTION KEY
TONE KEY
, a
VIBRATION
Important guidelines when using the Wireless Fence Pet Training System
Included in your Wireless Fence Pet Training System are Collar Contacts in three
different lengths (short, medium and long) that deliver static correction to your dog. Choose the appropriate length for your dog’s hair coat. The Pet Collar Unit was shipped with medium Collar Contacts that are suitable for dogs with medium hair coats. If your dog has dense coat or undercoat, use one of the longer Collar Contacts included with the product.
Proper fit of the Pet Collar Unit is critical to the performance and effectiveness of
the Wireless Fence Pet Training System. If the fit is too loose, the Pet Collar Unit will not be able to get sufficient contact with the skin to deliver static correction. If the fit is too tight, it will irritate your dog’s skin. Tighten the Pet Collar Unit high on your dog’s neck, tight enough that you can get two fingers between the collar strap and your dog. It should not be able to rotate around the neck.
Do not make your dog wear the Pet Collar Unit for more than 12 hours
continuously to avoid skin irritation.
Do not connect a leash to the Pet Collar Unit as this might pull the Collar Contacts too
tight against your dog’s neck. When connecting a separate collar for the leash, make sure that it does not add pressure on the Pet Collar Unit.
Check the contact area on your dog’s neck for signs of irritation. If there is a rash
or sore, discontinue use until the skin is completely healed. See a veterinarian if the condition persists.
Table of contents
1. Safety Instructions.................................................................................. 10
2. Getting Started ....................................................................................... 12
2.1 Set up the Wireless Fence Unit ................................................................ 12
2.2 Wireless Fence Unit Battery Installation and Charging .......................... 13
2.3 Wireless Fence Unit Power Supply ......................................................... 14
2.4 Connect the Outdoor Stake to the Wireless Fence Unit ........................ 15
2.5 Remote Control Unit Battery Installation ................................................. 15
2.6 Attach the Adjustable Strap to the Pet Collar Unit .................................. 16
2.7 Charging the Pet Collar Unit ................................................................... 17
2.8 Fit the Pet Collar Unit on your Dog’s Neck .............................................. 18
2.9 Trim away excess strap length................................................................. 19
2.10 Change Collar Contacts on the Pet Collar Unit ...................................... 19
2.11 Using the Test Light .................................................................................. 21
3. Using the Pet Collar Unit ........................................................................ 22
3.1 Powering On/Off the Pet Collar Unit ...................................................... 22
3.2 Pairing the Pet Collar Unit with the Wireless Fence Unit ........................ 22
3.3 Pairing the Pet Collar Unit with the Remote Control Unit ...................... 23
4. Using the Remote Control Unit.............................................................. 24
4.1 Powering On/Off the Remote Control Unit ............................................ 24
4.2 Select a Pet Collar Unit (if you have more than 1 Pet Collar Unit) .......... 24
4.3 Deliver Static Correction ......................................................................... 24
4.4 Determine the TRAINING LEVEL for your Dog ...................................... 24
4.5 When to Increase Level of Static Correction.......................................... 25
4.6 Pairing the Pet Collar Unit with the Remote Control Unit ...................... 25
4.7 Walkie-Talkie Function ............................................................................. 26
4.8 Tone Key .................................................................................................. 26
4.9 Vibration Key ............................................................................................ 26
5. Using the Wireless Fence Unit ............................................................... 27
5.1 Powering On/Off the Wireless Fence Unit............................................. 27
5.2 Select a Pet Collar Unit (if you have more than 1 Pet Collar Unit) .......... 27
5.3 Turn On Fencing Mode ........................................................................... 27
5.4 Turn Off Fencing Mode ........................................................................... 27
5.5 Set the Static Correction Level................................................................ 27
5.6 Pairing the Pet Collar Unit with the Wireless Fence Unit ........................ 28
6. Setting Up an Invisible Boundary Zone ................................................. 29
6.1 What You’ll Need: .................................................................................... 29
6.2 Set Transmission Range on your Wireless Fence Unit ............................ 29
6.3 Set Static Correction Level to Level 2 or 3 .............................................. 29
8
6.4 Confirm Boundary Zone ..........................................................................29
6.5 Place Boundary Flags ............................................................................... 30
7. Training Program ....................................................................................32
7.1 Training Rules ...........................................................................................32
7.2 Training Tips .............................................................................................33
7.3 Training - DAY 1 ........................................................................................33
7.4 Training - DAYS 2 - 4 .................................................................................36
7.5 TRAINING - DAYS 5 - 7 .............................................................................37
7.6 Training - DAYS 8 - 14 ...............................................................................38
7.7 Training - DAYS 14 - 21 ............................................................................38
8. Disposal of the Device (Environment) ...................................................39
9. Cleaning and Care .................................................................................. 40
10. Frequently Asked Questions .................................................................. 41
11. Troubleshooting .....................................................................................43
12. General Information ............................................................................... 44
ENGLISH
9
1. Safety Instructions
WARNING:
Not for use with dogs that pose a risk of injury to people or other animals. If in doubt that this product is right for you, please consult your veterinarian or certified behaviorist.
RISK OF SKIN DAMAGE
• Determine a proper fit of the Pet Collar Unit on your dog’s neck. If worn
for too long or the fit is too tight, it may cause skin damage.
• Check your dog’s neck area daily for signs of skin irritation.
• Discontinue use immediately if a rash or sore is found on the neck area.
• AVOID wearing for more than 12 continuous hours a day.
• Clean your dog’s neck area and the Collar Contacts on the Pet Collar
Unit with a soft damp cloth weekly.
WARNING
The Wireless Fence Pet Training System is not a physical fence or barrier. It is intended as a training tool to teach your dog safe boundaries and act as a deterrent for attempts to cross the boundary you have established. The manufacturer of this product CAN NOT guarantee that this product will successfully contain all dogs in all circumstances due to the infinite number of dog personalities, temperaments and different environments. Keep your dog on a leash at all times during the training process, until you have completely convinced yourself of your dog’s compliance to the boundaries.
The Wireless Fence Pet Training System is suitable for use on healthy, non­aggressive dogs when used as described in this User's Guide. Always read the instructions in this User's Guide carefully before using the product.
• This product is not a toy. Do not allow children to play with it.
• This product is not a substitute for responsible supervision of your dog.
10 Safety Instructions
• Test this product and all its functions so that you are familiar with it prior to
actual use.
• Only use batteries of the same type. The Remote Control Unit uses 2x 1.5V
AAA-sized alkaline batteries and the Wireless Fence Unit uses an AA-sized rechargeable battery pack.
• Do not use extension cords with power adapters. Only use the power
adapters provided.
• Keep this User's Guide for future reference.
CAUTION
There is danger of explosion if the battery is replaced by an incorrect type. Dispose of used batteries according to their instructions.
ENGLISH
Safety Instructions 11
2. Getting Started
invisible boundary line
When installing the Wireless Fence indoors, mount it as close to the window as possible.
2.1 Set up the Wireless Fence Unit
The Wireless Fence Unit works as a transmitter that detects the position of your dog and transmits signals to the Pet Collar Unit that is worn on your dog.
• You can place the Wireless Fence Unit on a table top, connect it to a stake for use outdoors or mount it on a wall.
Place on table top.
invisible boundary line
Connect to the
outdoor stake and
pound into the
ground.
invisible boundary line
12 Getting Started
2.2 Wireless Fence Unit Battery Installation and Charging
IMPORTANT
Installing the rechargeable battery pack and charging it fully before use is recommended. This will allow the unit to operate on battery in the event of a power outage, while traveling, or on a camping trip.
The Wireless Fence Unit can be operated using an AA-sized rechargeable battery pack (supplied with the product) as an alternative source of power.
1. Use a small cross-head or flat end screwdriver to unscrew the battery compartment cover as shown below.
Small cross-head or flat end screwdriver.
ENGLISH
2. Remove the battery compartment cover as shown below.
Getting Started 13
3. Insert the wire tab of the rechargeable battery pack into the contact slot as shown below and fit the battery pack into the compartment.
Red
Power connector
Black
4. Close the battery compartment cover and gently tighten the screw in a clockwise direction using a small cross-head or flat end screwdriver.
5. Connect the small plug of the power adapter (6V DC/1A, supplied with the product) to the power connector of the Wireless Fence Unit and the other end into the electrical outlet to charge the battery pack.
2.3 Wireless Fence Unit Power Supply
1. Connect the small plug of the power adapter to the power connector of
the Wireless Fence Unit and the other end into the electrical outlet.
NOTE
Only use the supplied power adapter (6V DC / 1A). The battery pack will take approximately 16 hours to charge.The average battery life per charge is up to 27 hours, depending on how often you use it.
14 Getting Started
2. Press and hold the POWER KEY to power the Wireless Fence Unit on
or off.
2.4 Connect the Outdoor Stake to the Wireless Fence Unit
Fit the outdoor stake here.
Turn clockwise
1. Fit the Outdoor Stake to the Wireless Fence Unit and turn clockwise to
ENGLISH
tighten.
2.5 Remote Control Unit Battery Installation
The Remote Control Unit uses 2x 1.5V AAA-sized alkaline batteries.
Small cross-head or flat end screwdriver.
1. Use a small cross-head or flat end screwdriver to unscrew the battery
compartment cover as shown above.
Getting Started 15
Loading...
+ 35 hidden pages