Binatone Electronics CA001 User Manual

VERVE

CAM

VERVE

CAM+

Quick Start Guide

For detailed operating instructions, refer to the User Manual which can be downloaded from

www.verve.life

Yo u r C a m e r a

1. Camera LED (Blue / Red)

2. Speakers

3. Camera Lens

4. Microphone

5. micro SD Card* Slot and Reset Button (micro SD

Card is not included.)

6. Power / Mode Button

7. Mode Indicators (Photo / Video / Streaming)

8. Shutter / Select Button

9. Lanyard Hole

10. Locking Holes

11. micro-USB socket

* supports microSDHC cards up to 32GB.

Accessories included with Verve CAM+

Waterproof Case • Clip Mount • Bumper & lanyard • Universal Mount

Additional accessories for other home or outdoor activities can be purchased separately from www.verve.life

Your Camera 1

Step 1: Setting up

Charge the Battery

Connect the power adapter to an electrical outlet and insert the plug into the micro-USB socket on the underside of the Camera. Only use the power adapter (5V 1A) with the micro-USB plug.

Note: If the Camera is OFF, the LED indicator lights up in red when charging and goes off when the battery is fully charged. It takes about 6 hours to fully charge the battery for the first time.

Power On & Off the Camera

To p ow er ON th e C ame ra, hold down the POWER / MODE button

lights up in blue. To power OFF the Camera, hold down the POWER

/ MODE button voice prompt indicating that the Camera is powering off before the LED indicator goes off.

0 for 3 seconds. The LED indicator

0 for 3 seconds. You will hear a

2 Step 1: Setting up

+ 7 hidden pages