How it Works
Binatone Electronics
Loading...
BLINK83
User Manual
29 pgs1.34 Mb0
Table of contents
Loading...

Binatone Electronics BLINK83, MBP36HDPU User Manual

User’s Guide
Digital Video Baby Monitor
Models: MBP36HD, MBP36HD-2, MBP36HD-3, MBP36HD-4
The features described in this User’s Guide are subject to modifications without prior notice.
Welcome...
to your new Motorola Video Baby Monitor!
Thank you for purchasing Motorola Video Baby Monitor. Now you can see and hear your baby sleeping in another room or you can monitor your older children in their playroom.
For product related questions, please call:
US and Canada 1-888-331-3383
Email: support@monitormonitors.com
This User's Guide provides you with all the information you need to get the most from your product.
Before you can use the baby monitor, we recommend you insert and fully charge the battery in the parent unit, so that it continues to work if you disconnect it from the power supply to carry it to another location. Please read the Safety Instructions on page 6 before you install the units.
Got everything?
• 1 x Parent unit
• 1 x Baby unit (Camera)
• 1 x Rechargeable Ni-MH battery pack
• 1 x Power adapter for the Parent unit
• 1 x Power adapter(s) for the Baby unit
In multi-camera packs, you will find one or more additional camera units with power adapter units and battery packs.
Overview of the Parent Unit
10 12
11
2
3
4
5
13
Display (LCD screen)
1.
Up Key
2.
3.
4.
5.
6.
7.
8.
+
Normal Mode: Tilt Up Menu Mode: Up Down Key Normal Mode: Tilt Down Menu Mode: Down Left Key Normal Mode: Pan Left Menu Mode: Left Right Key Normal Mode: Pan Right Menu Mode: Right Menu Key Press to open the Menu options OK Key O Video ON/OFF Key Press to turn OFF the LCD display Press again to turn ON the LCD
-
<
>
M
V
display
Parent unit menu icons
Signal Level (4 Levels)
Night Vision Mode (Screen changes to Black/White)
Talk M od e
Battery Level Control (4 Levels)
Pan Left
Pan Right
Til t Up
Til t D ow n
14
1
15
6
7
8
16
9
17
POWER
Talk Ke y
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
T
Press and hold to speak to your baby Power Adapter / Battery LED BLUE when mains adapter power on. RED when battery low. Unit ON/OFF LED (Green) Audio Level LED (Green, Orange, Red, Red) Microphone Power Key Press and Hold to turn the unit ON/OFF Antenna Lift the antenna for optimal reception Battery cover Stand Speaker USB power adapter socket AV out / Audio out
P
19
18
20
Parent unit menu icons (cont’d)
V
Volume Level Control (8 Levels)
Zoom Level Control (1X, 2X)
Brightness Level Control (8 Levels)
Lullaby Control (5 Song Selections)
Alarm Setting (6h, 4h, 2h, Off ) Temperature Reading (HH ºC / ºF or LL ºC / ºF)
Icon & readings turn RED > 29ºC / 84ºF, and reading display HH ºC / ºF > 36ºC / 97 ºF) Icon & readings turn RED < 14ºC / 57ºF, and reading display LL ºC / ºF < 1ºC / 34 ºF)
Cam Control (scan, view, add, delete)
Screen viewing mode control (Single Screen, 4-split Screen)
Set Video On Timer (5 min, 30 min, 60 min)
Overview of Your Baby Unit
9
11
10
8
1. Photo Sensor (Night Vision Mode)
1
2
3
4
5
7
6
6. Speaker
7. ON/OFF Switch
2. Camera Lens 8. Power Adapter Socket
3. Infrared LEDs 9. Antenna
4. Power LED 10. Temperature Sensor
5. Microphone 11. Pair Key
Important guidelines for installing your Baby Monitor
• To use your Video Monitor Baby and Parent Units together, you must be able to establish a radio link between them, and the range will be affected by environmental condit ions.
• Any large metal object, like a refrigerator, a mirror, a filing cabinet, metallic doors or reinforced concrete between the Baby and Parent Unit may block the radio signal.
• The signal strength may also be reduced by other solid structures, like walls, or by radio or electrical equipment, such as TVs, computers, cordless or mobile phones, fluorescent lights or dimmer switches.
• Use of other 2.4 GHz products, such as wireless networks (Wi-Fi systems, or microwave ovens, may cause interference with this product, so keep the baby monitor away at least 5ft (1.5m) from these types of products, or turn them off if they appear to be causing interference.
• If the signal is weak, try lifti ng up the Parent Unit Antenna, moving the Parent and/or the
®
Baby Unit to different positions in the rooms.
PAIR
routers), Bluetooth®
Table of contents
1. Safety Instructions..................................................................................... 6
2. Getting Started..........................................................................................8
2.1 Baby Unit Power Supply..............................................................................8
2.2 Parent Unit Battery Installation ....................................................................8
2.3 Parent Unit Power Supply ...........................................................................9
2.4 Registration (Pairing).................................................................................10
2.5 View Video Through TV............................................................................10
3. Using the Baby Monitor........................................................................... 11
3.1 Setting up...................................................................................................11
3.2 Pan and Tilt ................................................................................................11
3.3 Night Vision Mode.....................................................................................11
3.4 Talk Mode..................................................................................................11
3.5 Video ON/OFF..........................................................................................11
3.6 Temperature Display (HH °C / °F or LL °C / °F)......................................12
4. Parent Unit Menu Options.......................................................................13
4.1 Volume.......................................................................................................13
4.2 Brightness..................................................................................................13
4.3 Lullaby........................................................................................................13
4.4 Zoom..........................................................................................................13
4.5 Alarm..........................................................................................................13
4.6 Camera Control ........................................................................................14
4.6.1 Add (pair) a camera ..................................................................14
4.6.2 View a camera ...........................................................................14
4.6.3 View multi-cameras on screen ..................................................14
4.6.4 Delete a camera ........................................................................15
4.6.5 Scan camera ..............................................................................15
4.7 Temperature..............................................................................................15
4.8 Power Saving mode ..................................................................................15
5. Disposal of The Device (environment)...................................................16
6. Cleaning .................................................................................................. 17
7. Help..........................................................................................................18
8. General Information ................................................................................20
ENGLISH
Table of contents 5

1. Safety Instructions

WARNING:
STRANGULATION HAZARD - Keep the unit and adapter cord more than 3 feet from the crib and out of the baby's reach. NEVER place camera or cords within the crib. Secure the cords more than 3 feet away from the baby's reach. Never use extension cords with AC Adapters. Only use the AC Adapters provided.
6 Safety Instructions
WARNING
CAMERA SET UP & USE:
● Determine a location for the Baby Unit that will provide the best view of your baby in his/her crib.
● Place the BABY UNIT on a flat surface, such as a dresser, bureau, or shelf or mount the Unit to a wall securely using the keyhole slots under the stand.
● NEVER place the Baby Unit or cords within the crib.
● Do not place the Baby Unit or cords in the crib or within reach of the
baby (the unit and cords should be more than 3 feet away).
This digital video baby monitor is compliant with all relevant standards regarding electromagnetic fields and is, when handled as described in the User's Guide, safe to use. Therefore, always read the instructions in this User's Guide carefully before using the device.
• Adult assembly is required. Keep small parts away from children when assembling.
• This product is not a toy. Do not allow children to play with it.
• This baby monitor is not a substitute for responsible adult supervision.
• Keep this user's guide for future reference.
• Do not place the baby unit or cords in the crib or within reach of the baby (the unit and cords should be more than 3 feet away)
• Keep the cords out of reach of children.
• Do not cover the baby monitor with a towel or blanket.
• Never use extension cords with power adapters. Only use the power adapters provided.
• Test this monitor and all its functions so that you are familiar with it prior to actual use.
• Do not use the baby monitor near water.
• Do not install the baby monitor near a heat source.
Safety Instructions 7
ENGLISH
• Only use the chargers and power adapters provided. Do not use other chargers or power adapters as this may damage the device and battery pack.
• Only insert a battery pack of the same type.
• Do not touch the plug contacts with sharp or metal objects.
CAUTION
Risk of explosion if battery is replaced by an incorrect type.
Dispose of used batteries according to their instructions.
8 Safety Instructions

2. Getting Started

Black
Red
Small cross head or Flat end screw driver

2.1 Baby Unit Power Supply

1. Connect the small plug of the power adapter to the baby unit (camera) and
the other end to the electrical outlet.
NOTE
Only use the enclosed power adapter (5V DC / 1500mA).
2. Slide the ON/OFF switch to the ON position. The power LED will light up in green.
3. Slide the ON/OFF switch to the OFF position to turn the Baby Unit off.

2.2 Parent Unit Battery Installation

1. Insert the wire tab of the rechargeable battery pack into the contact slot as
shown above and fit the battery pack into the compartment.
ENGLISH
2. Replace the battery cover over the compartment and gently tighten the
screw in a clockwise direction using a Small cross head or Flat end screw drivers.
Getting Started 9
Loading...
+ 20 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use