Binatone Electronics BLINK1 Users Manual

USER’S GUIDE

BLINK1 / MBP2000BU / MSC3

BABY MONITOR

USER’S GUIDE

The features described in user's guide are subject to modifications without prior notice.

Welcome...

to your new Motorola Baby Monitor!

Thank you for purchasing the BLINK1/MBP2000BU/MSC3. Now you can see and hear your baby sleeping in another room or you can monitor your older children in their playroom.

Please retain your original dated sales receipt for your records. For warranty service of your Motorola product, you will need to provide a copy of your dated sales receipt to confirm warranty status.

Registration is not required for warranty coverage.

For product related questions, please call:

US and Canada 1-888-331-3383

UK 0845 218 0890

On the Web: www.motorola.com

This User's Guide provides you with all the information you need to get the most from your product.

Before you can use the baby monitor, we recommend you insert and fully charge the battery in the parent unit, so that it continues to work if you disconnect it from the power supply to carry it to another location. Please read the Safety Instructions on page 6 before you install the units.

Got everything?

•1 x Baby Camera Unit

•1 x Power adaptor for the Baby Camera Unit

Overview of Your Baby Unit

	1		9
	2		11
	3
	4		10
	5
	7
	6		8
1.	Photo Sensor (Night Vision	6.	Speaker
2.	Mode)	7.	ON/OFF Switch
	Camera Lens	8.	Power Adapter Connector
3.	Infared LEDs	9.	Antenna
4.	Power LED	10.	Temperature Sensor
5.	Microphone	11.	Pair Key

Important guidelines for installing your Baby Monitor

•To use your Video Monitor Baby and Parent Unit together, you must be able to establish a radio link between them, and the range will be affected by environmental conditions.

•Any large metal object, like a refrigerator, a mirror, a filing cabinet, metallic doors or reinforced concrete between the Baby and Parent Unit may block the radio signal.

•The signal strength may also be reduced by other solid structures, like walls, or by radio or electrical equipment, such as TVs, computers, cordless or mobile phones, fluorescent lights or dimmer switches.

•Use of other 2.4GHz products, such as wireless networks (WiFi routers), Bluetooth® systems, or microwave ovens, may cause interference with this product, so keep the baby monitor away at least 5ft (1m) from these types of products, or turn them off if they appear to be causing interference.

•If the signal is weak, try moving the Parent and/or the Baby Unit to different positions in the rooms.

Table of contents
1.	Safety Instructions.....................................................................	6
2.	Getting Start................................................................................	8
3.	Operation Mode..........................................................................	9
4.	Direct Mode Monitoring ..........................................................	12
5.	Setup The Camera In Router Mode........................................	16
6.	More Function Of Baby Monitor..............................................	28
7.	Disposal Of The Device............................................................	36
8.	Cleaning ....................................................................................	37
9.	General Information .................................................................	39

ENGLISH

Table of contents	5

1. Safety Instructions

WARNING:

STRANGULATION HAZARD - Keep the adapter cord out of baby's reach.

NEVER place camera or cords within the cot / crib. Secure the cord some distance away from baby's reach.

Never use extension cords with AC Adapters. Only use the AC Adapters provided.

CAMERA SET UP & USE:

●Determine a location for the CAMERA that will provide the best view of your baby in his cot / crib.

●Place the CAMERA on a flat surface, such as a dresser, bureau, or shelf.

●NEVER place camera or cords within cot / crib.

●Secure the cord to the wall to keep cord away from the baby's reach.

WARNING

This baby monitor is compliant with all relevant standards regarding electromagnetic fields and is, when handled as described in the User's Guide, safe to use. Therefore, always read the instructions in this User's Guide carefully before using the device.

•Adult assembly is required. Keep small parts away from children when assembling.

•This product is not a toy. Do not allow children to play with it.

•This baby monitor is not a substitute for responsible adult supervision.

•Keep this user's guide for future reference.

•Do not place the baby unit or cables in the cot / crib or within reach of the baby (the unit should be at least 3 feet away).

•Keep the cords out of reach of children.

•Do not cover the baby monitor with a towel or blanket.

6	Safety Instructions

	• Never use extension cords with power adapters. Only use the power	ENGLISH
	adapters provided.
	• Test this monitor and all its functions so that you are familiar with it
	prior to actual use.
	• Do not use the baby monitor near water.
	• Do not install the baby monitor near a heat source.
	• Only use the chargers and power adapters provided. Do not use other
	chargers or power adapters as this may damage the device and
	battery pack.
	• Do not touch the plug contacts with sharp or metal objects.

Safety Instructions	7

2. Getting Started

2.1Baby Unit Power Supply

1.Connect the small plug of the power adapter to the baby unit and the other end to the electrical outlet.

NOTE

Only use the enclosed power adapter (5.9V DC / 1000mA).

2.Slide the ON/OFF switch to the ON position. The power LED will light up in green.

3.Slide the ON/OFF switch to the OFF position to turn the Baby Unit off.

8	Getting Started

3. Operation Mode

There are three operation modes how the Baby Monitor connected to and viewed by the Parent Unit.

3.1Local Monitoring in Direct Connect Mode:

•Auto and Direct connection between Parent and Baby camera unit for in-house monitoring without the connection to WiFi Router.

•Easy Setup.

ENLISH

Operation Mode	9

3.2Local Monitoring in Router Mode:

•Parent and Camera unit are connected via WiFi Router so Parent unit can access both Camera and Internet at the same time.

10	Operation Mode

3.3 Remote Monitoring in Router Mode:

• With the IP and Server Control, the user can view the video picture	ENLISH
anywhere from Smartphone (iPhone and Android Phone), Tablet and
PC.

Operation Mode	11

4. Direct Mode Monitoring

4.1Turn ON the camera with the slide switch.

The Green LED on the camera front panel will be turned on and start to blink after 45 sec. After 90 sec, it turns into the Direct Mode and waits for the Parent handset unit to connect. Then the Green LED will blink every 2 sec. Duration of blink is 200ms.

If the Camera is already set to Router mode in the past, it needs to reset to Direct Mode by press-and-hold the RESET button on the bottom cabinet for 10 seconds until you hear the double beep confirmation tone.

4.2Turn on the MBP2000 Parent unit. In the Home Screen, select the Apps Baby Monitor.

12	Direct Mode Monitoring

4.3 Then you will see the Login/Register screen

here.	ENLISH

4.4Then you will view a list of camera which is already set in DIRECT mode and wait for

connection.

The camera name consists of “Moto-Cam-xxxxxx” where “xxxxxx” is low 6 nibbles of the MAC address assigned for each camera unit at the factory. The 2nd line “00:0e:a3:07:0a:08” is the MAC address of the Camera. This display of MAC address will be removed in final software.

Direct Mode Monitoring	13

If you cannot see any Camera in the list, press [Back] key back to Welcome screen and select [Direct Connect] again. Please note the [ReScan] button doesn’t work at the current software.

If still not found, please check if the Camera is already in Direct Mode by the Green LED status. If not, reset the Camera to Direct Mode by press-and-hold the RESET button on the bottom cabinet for 10 seconds until you hear the double beep confirmation tone.

4.5Select the Camera and then you will be prompt to enter the Camera Password.

******

14	Direct Mode Monitoring

4.6 For the production unit, each camera will

be preset with an unique password and written	ENLISH
in the sticker at the bottom cabinet. In the
current development software, the camera
is not set any password so you could enter
anything longer than 4 characters. Then select
[Next] to continue.
4.7 Then you should see the Camera video in a few
seconds.

Direct Mode Monitoring	15