Doc Title : Product Data – User’s Guide Revision : R.00
Model : MBP28 Page(s) : 1 of 17
MBP28, MBP28/2, MBP28/3, MBP28/4
Baby Monitor
The features described in this user’s guide are subject to
modifications without prior notice.
This document contains confidential and proprietary information of VTech Telecommunications Ltd
Doc Title : Product Data – User’s Guide Revision : R.00
Model : MBP28 Page(s) : 2 of 17
Welcome...
to your new Motorola Baby Monitor!
Thank you for purchasing the MBP28. Now you can see and hear your baby sleeping in the another room or you
can monitor your older children in their play room.
Please retain your original dated sales receipt for your records. For warranty service of your Motorola product, you
will need to provide a copy of your dated sales receipt to confirm warranty status. Registration is not required for
warranty coverage.
For product-related questions, please call:
US and Canada 1-888-331-3383 (FOR US VERSION)
UK 0845 218 0890 (FOR UK VERSION)
ROI 08187 62092 (FOR UK VERSION)
On the Web: www.motorola.com
This User’s Guide provides you with all the information you need to get the most from
your product.
Before you use the baby monitor, we recommend you insert and fully charge the battery
in the parent unit, so that it continues to work if you disconnect it from the mains power
to carry it to another location. Please read the Safety Instructions on page xx before you
install the units.
Got everything?
• Parent unit (MBP28 PU, MBP28/2 PU, MBP28/3 PU, MBP28/4 PU)
• Camera unit(s) (MBP28 BU, MBP28/2 BU, MBP28/3 BU, MBP28/4 BU)
• Rechargeable Ni-MH battery pack for the Parent unit
• Battery door for Parent unit
• Belt clip for Parent unit
• Power adapter for the Parent unit
• Power adapter(s) for the Camera unit(s)
In multi-camera packs, you will find one or more additional camera units with power adapter units.
This document contains confidential and proprietary information of VTech Telecommunications Ltd
Doc Title : Product Data – User’s Guide Revision : R.00
Model : MBP28 Page(s) : 3 of 17
Overview of your Parent unit
1
Power Indicator
On when the parent unit is powered on.
Flashes when the parent unit is searching for a
camera unit.
Off when the parent unit is powered off.
2
c / Volume +
In idle mode: Press to increase the speaker
volume.
In menu mode: Press to move up the menu list.
3
Menu / OK
In idle mode: Press to access the main menu.
In menu mode: Press to access the sub-menu, or
confirm the settings.
4
d / Volume –
In idle mode: Press to decrease the speaker
volume.
In menu mode: Press to move down the menu
list.
5
Talk
9
8
7
1
2
3
4
56
6
LCD On/Off
In monitoring mode: Press to turn on/off the LCD
display.
In menu mode: Press to go back to idle mode.
7
Power / Back
In power off mode: Press to power on the parent
unit.
In monitoring mode: Press to switch to the next
camera unit.
In idle or menu mode: Press and hold to power off
the parent unit.
In menu mode: Press to cancel settings and back
to the previous level.
8
Battery/Charging Indicator
On steadily when in charging mode.
Flashes when low battery is detected.
9 Color Display Screen (LCD)
This document contains confidential and proprietary information of VTech Telecommunications Ltd
Doc Title : Product Data – User’s Guide Revision : R.00
Model : MBP28 Page(s) : 4 of 17
In idle or menu mode: Press and hold to talk
back through the camera unit. Release to quit the
talk mode.
When LCD is off: Press to turn on the LCD.
Parent Unit Display
Icons Behaviors Description
Indicates the signal strength between the camera unit and parent unit. The more the blocks, the
stronger the connection signal.
Disappears when no connection between the camera unit and parent unit.
Indicates when the speaker of the parent unit is muted.
Indicates the speaker volume level of the parent unit, from 1 (quite) to 5 (loud).
Indicates when the camera unit is playing a lullaby.
Indicates when the current camera unit is being previewed on the screen.
24℃ Indicates the temperature detected at the current camera unit, between 14℃ (57℉) and 39℃ (102
℉).
Indicates the timer alarm is activated.
Indicates the sound alert is set to on.
Indicates when the parent unit is connected with the power adapter but no battery pack installed.
Low battery, needs charging.
1/2 battery level. More bars inside mean higher battery capacity.
Full battery level.
Internal bars cycling indicates the battery is charging.
Menu Structure of Parent Unit
MAIN
MENU
SUB
MENU
BU
SELECTION
Baby Unit 1
Baby Unit 2
Baby Unit 3
Baby Unit 4
All Baby Units
Note: Only
Baby Units
registered will
be shown in
the list.
This document contains confidential and proprietary information of VTech Telecommunications Ltd
LANGUAGE TIMER BRIGHTNESS
Activation
Set Timer
SOUND
ALERT
Level 1 ~ 5 On
Off
ALERT
TONES
Low Battery
No Link
REGISTER RESET
Doc Title : Product Data – User’s Guide Revision : R.00
Model : MBP28 Page(s) : 5 of 17
Overview of your Camera unit
10
9
8
1
Infrared Lights
4 x infra-red LEDs for night vision illumination.
2
Camera Lens
3
Power/Link Indicator
On steadily when the camera unit is switched on
and linked to the parent unit.
Flashes quickly when the camera unit is in
registration mode.
Flashes slowly when the camera unit is out of
range or not registered to a parent unit.
Off when the camera unit is switched off.
4
c / Volume +
Press to increase the speaker volume.
5
Power
Press to power on the camera unit.
Press and hold to power off the camera unit.
Important guidelines for installing your Baby Monitor
z To use your camera unit and parent unit together, you must be able to establish a radio link between them,
and the range will be affected by environmental conditions.
z Any large metal object, like a refrigerator, a mirror, a filing cabinet, a metallic door or reinforced concrete,
between the camera and parent unit may block the radio signal.
This document contains confidential and proprietary information of VTech Telecommunications Ltd
1
2
3
4
5
6
7
6
d / Volume –
Press to decrease the speaker volume.
7
Stop
Press to stop the lullaby playing.
8
Play
Press to start playing the selected lullaby.
9
Lullaby
Press to start playing the selected lullaby when
the camera unit is linked with the parent unit.
During lullaby playing, press to select and play
the other lullabies.
10
Photo sensor
Light sensor to detect when night vision is
required.
Doc Title : Product Data – User’s Guide Revision : R.00
Model : MBP28 Page(s) : 6 of 17
z The signal strength may also be reduced by other solid structures, like walls, or by radio or electrical
equipment, such as TVs, computers, cordless or mobile phones, fluorescent lights or dimmer switches.
z If the signal is poor, try moving the parent and/or the camera unit to different positions in the rooms.
TABLE OF CONTENTS
1
SAFETY INSTRUCTIONS.................................................................................................................................................7
2 GETTING STARTED .........................................................................................................................................................8
2.1 CAMERA UNIT POWER SUPPLY.........................................................................................................................................8
2.2 PARENT UNIT BATTERY INSTALLATION ...........................................................................................................................8
2.3 BELT CLIP ON PARENT UNIT.............................................................................................................................................9
3 USING YOUR BABY MONITOR .....................................................................................................................................9
3.1 POWER ON/OFF THE PARENT UNIT ...................................................................................................................................9
3.2 POWER ON/OFF THE CAMERA UNIT ..................................................................................................................................9
3.3 ADJUST SPEAKER VOLUME OF PARENT UNIT AND CAMERA UNIT.....................................................................................9
3.4 TALK BACK ..................................................................................................................................................................10
3.4.1 Adjust talk back volume........................................................................................................................................10
3.5 TEMPERATURE.............................................................................................................................................................. 10
3.6 LULLABY ......................................................................................................................................................................10
3.7 SWITCH MONITORING CAMERA UNIT .............................................................................................................................10
4 PARENT UNIT SETTINGS .............................................................................................................................................11
4.1 SET THE LANGUAGE ......................................................................................................................................................11
4.2 TIMER ...........................................................................................................................................................................11
4.2.1 Turn on the timer..................................................................................................................................................11
4.2.2 Set the timer..........................................................................................................................................................11
4.3 SET THE BRIGHTNESS ....................................................................................................................................................11
4.4 SOUND ALERT ...............................................................................................................................................................11
4.5 ALERT TONES................................................................................................................................................................11
4.6 SELECT CAMERA UNIT...................................................................................................................................................12
4.7 REGISTER A CAMERA UNIT ............................................................................................................................................12
4.8 RESET ...........................................................................................................................................................................12
5 DISPOSAL OF THE DEVICE (ENVIRONMENT).......................................................................................................12
6 CLEANING ....................................................................................................................... .................................................13
7 TROUBLESHOOTING.....................................................................................................................................................13
8 GENERAL INFORMATION ...........................................................................................................................................14
9 TECHNICAL SPECIFICATIONS ...................................................................................................................................16
This document contains confidential and proprietary information of VTech Telecommunications Ltd
Doc Title : Product Data – User’s Guide Revision : R.00
Model : MBP28 Page(s) : 7 of 17
1 SAFETY INSTRUCTIONS
WARNING:
STRANGULATION HAZARD – Keep the adapter cord out of baby’s reach.
NEVER place the baby monitor or its cord within the crib.
Secure the cord some distance away from baby’s reach.
Never use extension cords with AC Adapters. Only use the AC Adapters provided.
This baby monitor is compliant with all relevant standards regarding electromagnetic fields and is, when handled as
described in the User‘s Guide, safe to use. Therefore, always read the instructions in this User’s Guide carefully
before using the device.
z Determine a location for the baby monitor that will provide the best audio reception of your baby in his crib.
z Place the baby monitor on a flat surface, such as a dresser, bureau, or shelf.
z Never place the baby monitor or its cord inside the crib or playpen.
z Never immerse any part of the baby monitor in water or any other liquid.
z Make sure the camera unit and the cord are always out of reach of the baby.
z Adult assembly is required. Keep small parts away from children when assembling.
z This product is not a toy. Children should be supervised to ensure that they do not play with the baby monitor.
z This baby monitor is not a substitute for responsible adult supervision.
z Keep this User’s Guide for future reference.
z Never cover the baby monitor with a towel or blanket.
z Never use extension cords with power adapters. Only use the power adapters provided.
z Test this monitor and all its functions so that you are familiar with it prior to actual use.
z Never use the baby monitor in moist places or close to water.
z Do not expose the baby monitor to extreme cold or heat or to direct sunlight. Do not put the baby monitor
close to a heat source.
z Only use the chargers and power adapters provided. Do not use other chargers or power adapters as thi s may
damage the device and battery pack.
z Only insert battery pack of the same type.
z Do not touch the plug contacts with sharp or metal objects.
z To avoid the risk of electric shock, do not open the housing of the camera unit or parent units, other than the
battery compartment.
z This baby monitor is intended as an aid. It is not a substitute for responsible and proper adult supervision and
should not be used as such.
CAUTION
Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions.
Use only battery pack with rating: 2.4V 750mAh.
This document contains confidential and proprietary information of VTech Telecommunications Ltd
Doc Title : Product Data – User’s Guide Revision : R.00
Model : MBP28 Page(s) : 8 of 17
2 GETTING STARTED
2.1 Camera unit power supply
1. Insert the DC plug of the power adapter with smaller DC plug into the DC jack in the side of the camera unit.
2. Connect the other end of the power adapter to a suitable power outlet.
NOTE
Only use the provided power adapter.
2.2 Parent unit battery installation
A rechargeable battery pack is supplied and should be fitted, so that the parent unit can be moved without losing
the link and picture from the camera unit(s). Charge the parent unit before you use if for the first time or when the
parent unit indicates that the battery is low.
This document contains confidential and proprietary information of VTech Telecommunications Ltd
Doc Title : Product Data – User’s Guide Revision : R.00
Model : MBP28 Page(s) : 9 of 17
1. Take off the belt clip/stand.
2. Slide off the battery compartment cover.
3. Insert the plug of the battery pack into the jack inside the battery compartment, and fit the battery pack into the
compartment.
4. Replace the battery compartment cover, and reinstall the belt clip/stand (refer to section 2.3).
5. Insert the DC plug of the power adapter with the bigger DC plug into the DC jack in the side of the parent unit.
6. Connect the other end of the power adapter a suitable power outlet.
7. The Charging Indicator comes on.
NOTE
Only use the provided power adapter and battery pack.
The parent unit can work with the power adapter connected but without a battery pack installed.
2.3 Belt clip/stand on parent unit
Belt clip position Desktop position
1. Attach the belt clip to the lock slots on the back sides.
2. On normal state, the belt clip could be hanged on the belt directly.
3. Lift up the belt clip and rotate 180°, then the parent unit could stand on the desk. Do NOT hang on the human
body.
3 USING YOUR BABY MONITOR
Please read these instructions carefully, and be aware that this baby monitor is only intended as an aid. It is not a
substitute for responsible, correct parental supervision.
3.1 Power on/off the parent unit
1. When the parent unit is off, press <POWER/BACK> until you hear a beep and the Power Indicator starts to
flash. The parent unit will search for and link itself to the registered camera units.
2. When the parent unit is on, press and hold <POWER/BACK> until the Power Indicator is off. The parent unit is
now powered off, although the display may take a few seconds to go off fully.
3.2 Power on/off the camera unit
1. When the camera unit is off, press <POWER> to power it on. The Power/Link Indicator will flash for a few
seconds until it links with the parent unit and stays steadily on.
2. When the camera unit is on, press and hold <POWER> until the Power/Link Indicator is off. The camera unit is
now powered off.
NOTE
If you place the parent and camera units too close together, you may hear a high pitched noise. This is not a fault.
The units are designed to be operated at some distance apart, e.g. in separate rooms, so move the units further
apart.
3.3 Adjust speaker volume of parent unit and camera unit
There are 5 volume levels on the camera unit, and 6 levels on the parent unit, including VOLUME OFF. The
volume level of parent unit will be shown on the status bar when you adjust the volume.
1. Press <c> or <d> on the parent unit or <c> or <d> on the camera unit to adjust the respective volume level.
This document contains confidential and proprietary information of VTech Telecommunications Ltd
Doc Title : Product Data – User’s Guide Revision : R.00
Model : MBP28 Page(s) : 10 of 17
2. The <SPEAKER MUTED ICON> will be displayed if the volume is turned off on the parent unit.
An audible alert will emit when you reach the highest or lowest volume level.
Changing the volume setting on the camera unit affects the volume when you use the Talk Back feature and when
playing a lullaby.
3.4 Talk Back
You can use the Talk Back feature to comfort and reassure your baby.
During Talk Back, you will not be able to hear your baby until you release <TALK>.
1. Press and hold <TALK> on the parent unit to speak to your baby. Talk will be displayed on the parent unit.
2. Release to hear your baby again.
3.4.1 Adjust talk back volume
The camera unit has 5 volume levels from Level 1 to Level 5.
Press <c> or <d> on the camera unit to increase or decrease the volume respectively.
NOTE
If a lullaby is playing, it will stop during Talk Back, but will restart from the beginning when the Talk Back ends.
3.5 Temperature
The camera unit constantly monitors the temperature in your baby’s room and alerts you if it gets lower than 14°C
(or 57°F), by emitting a warning beep and showing the alert message “Too cold! from Baby Unit x” on the parent
unit screen, or if it gets higher than 39°C (or 102°F), it will show “Too hot! from Baby Unit x”. Although this is for
reference only, and there may be a small difference between the baby monitor reading and the actual temperatu re,
please check your baby immediately if such an alert message is triggered.
NOTE
The current temperature at the camera unit is shown on the parent unit status bar whenever it is displayed.
3.6 Lullaby
There are 3 lullabies available to play for your baby, either repeating one lullaby or repeating through all three
lullabies.
1. Press <LULLABY> on the camera unit to select the lullaby and start playing when the camera is linked with the
parent unit.
2. During playback, press <LULLABY> to step through different lullabies.
OR
Press <PLAY> on the camera unit to start playing the selected lullaby.
4. During playback, press <STOP> to stop playback.
NOTE
Once the camera unit loses the link with the parent unit, the lullaby playing will be stopped and will not be resumed
automatically even if the link is set up again.
3.7 Switch monitoring camera unit
The system allows registering up to four camera units. You can switch the monitoring camera unit by one-touch key
or by menu settings.
By one-touch key:
Press <POWER/BACK> on the parent unit when it is in video monitoring mode. The parent unit will switch to the
next registered camera unit to monitor your baby. After that, you can switch to other registered camera units by
further pressing <POWER/BACK> if necessary, with each registered camera unit being selected in turn.
By menu settings:
The system also allows the parent unit to be set to automatically switch among all the camera units, with each
registered camera unit being selected in turn at about 30 second intervals. Refer to section 4.6 for the instructions
of scanning all camera units automatically.
This document contains confidential and proprietary information of VTech Telecommunications Ltd
Doc Title : Product Data – User’s Guide Revision : R.00
Model : MBP28 Page(s) : 11 of 17
4 PARENT UNIT SETTINGS
4.1 Set the language
1. Press <MENU> to access main menu.
2. Press <c> or <d> to select LANGUAGE.
3. Press <MENU> and <c> or <d> to select the desired language.
4. Press <MENU> to confirm.
4.2 Timer
The timer function serves as an alarm to remind you of things-to-do for the baby such as feeding or medication,
and it can be set as a one off or a repeated time period.
4.2.1 Turn on the timer
1. Press <MENU> to access main menu.
2. Press <c> or <d> to select TIMER.
3. Press <MENU> and <c> or <d> to select Activation.
4. Press <c> or <d> to select On or Off.
5. If you select On, your will be prompted to select the alarm frequency from Once or Repeated.
6. Press <MENU> to confirm.
4.2.2 Set the timer
1. Repeat steps 1 to 2 in section 4.2.1.
2. Press <c> or <d> to select Set Timer.
3. Press <MENU> and then set the number of hours (00 to 12) using the <c> or <d> keys.
4. Press <MENU> and then set the number of minutes (00 to 59) using the <c> or <d> keys.
5. Press <MENU> to confirm the timer interval set.
NOTE
When the timer period is reached, the unit will emit an alert beep for 30 seconds and show 00:00 on the screen.
You can press any button to stop the beeps. If the timer mode was set to ONCE, the timer will be cancelled, but if
set to REPEATED, it will reset and start another timer period.
4.3 Set the brightness
1. Press <MENU> to access main menu.
2. Press <c> or <d> to select BRIGHTNESS.
3. Press <MENU> to enter to show the list of levels.
4. Press <c> or <d> to select from Level 1
to Level 5. The screen brightness changes as the options are selected.
5. Press <MENU> to confirm.
NOTE
A lower brightness level will reduce the power consumption.
4.4 Sound alert
When the sound alert is set ON, and the parent unit speaker volume is off, it will cause the parent unit to beep and
flash "Sound alert from Baby Unit x" on the display, whenever the sound at the baby unit goes above a preset
threshold.
1. Press <MENU> to access main menu.
2. Press <c> or <d> to select SOUND ALERT.
3. Press <MENU> and <c> or <d> to turn on or off the sound alert.
4. Press <MENU> to confirm.
* The parent unit beeps only if the sound level at the camera reaches the preset sensitivity level.
4.5 Alert tones
You can set the parent unit to give a warning when the battery is low and/or if the radio link to the camera unit is
lost. When activated, an alert screen will be displayed on the parent unit with an alert tone emitted simultaneously.
1. Press <MENU> to access main menu.
2. Press <c> or <d> to select ALERT TONES.
3. Press <MENU> and <c> or <d> to select Low Battery or No Link.
4. Press <MENU> and <c> or <d> to turn on or off the alert tone.
This document contains confidential and proprietary information of VTech Telecommunications Ltd
Doc Title : Product Data – User’s Guide Revision : R.00
Model : MBP28 Page(s) : 12 of 17
5. Press <MENU> to confirm.
NOTE
When LCD is off, any alert message will turn on the LCD.
4.6 Select camera unit
The system supports up to four camera units. You can select any registered camera unit and view the picture from
that camera.
1. Press <MENU> to access main menu.
2. Press <c> or <d> to select BU Selection.
3. Press <MENU> and <c> or <d> to select the desired camera unit or All Baby Units.
4. Press <MENU> to confirm. The parent unit will start to connect with the selected camera unit, while the other
unit(s) will be in shutdown mode. The CAM x icon (e.g. <Camera 2 icon>) will be shown on the status bar, when
displayed, where x is the baby unit number of the selected camera unit.
When All Baby Units is selected, the screen of the parent unit will automatically switch among all the registered
camera units, with each camera unit being selected in turn at about 30 second intervals.
NOTE
Only registered camera unit(s) will be shown in the selection list.
4.7 Register a camera unit
IMPORTANT
When you purchase your baby monitor system, all cameras are already registered to the parent unit, so you do not
need to register them.
Camera registration is only necessary if one has become faulty or if you buy a new one.
You can register up to 4 cameras to the parent unit.
To register a camera unit:
1. Press <MENU> to access main menu.
2. Press <c> or <d> to select REGISTER.
3. Press <MENU> to confirm. The parent unit will display Registration mode, and then display Registering...
which indicates it has entered the registration mode.
4. Press and hold <VOLUME +> on the camera until it emits a beep tone.
5. There will be a beep and the display will show Registered when the registration is successfully completed, and
the camera will be assigned a baby unit number, which can be checked from the parent unit.
4.8 Reset
You can restore all the adjustable settings of the registered camera units and parent unit to the original fa ctory
settings.
1. Press <MENU> to access main menu.
2. Press <c> or <d> to select RESET.
3. Press <MENU> to confirm. The display will show Confirm?.
4. Press <MENU> to confirm again. The parent unit and the registered camera units will be reset.
5 DISPOSAL OF THE DEVICE (ENVIRONMENT)
At the end of the product lifecycle, you should not dispose of this product with normal household
waste. Take this product to a collection point for the recycling of electrical and electronic equipment.
The symbol on the product, user’s guide and/or box indicates this.
Some of the product materials can be re-used if you take them to a recycling point. By reusing some
parts or raw materials from used products you make an important contribution to the protection of the environment.
Please contact your local authorities in case you need more information on the collection points in your area.
Dispose of the battery pack in an environmentally-friendly manner according to your local regulations.
This document contains confidential and proprietary information of VTech Telecommunications Ltd
Doc Title : Product Data – User’s Guide Revision : R.00
Model : MBP28 Page(s) : 13 of 17
6 CLEANING
Clean MBP28 with a slightly damp cloth or with an anti-static cloth. Never use cleaning agents or abrasive solvents.
Cleaning and care
z Do not clean any part of the product with thinners or other solvents and chemicals – this may cause
permanent damage to the product which is not covered by the warranty.
z Keep your MBP28 away from hot, humid areas or strong sunlight, and do not let it get wet.
z Every effort has been made to ensure high standards of reliability for your MBP28. However, if something
does go wrong, do not try to repair it by yourself – contact Customer Service for assistance.
7 TROUBLESHOOTING
Power Indicator on the parent unit does not come on
• Check whether the parent unit is powered on.
• Check whether the supplied battery pack is correctly installed and that they are not drained.
• Recharge the parent unit by connecting it to the power supply.
Power/Link Indicator on the camera unit flashes
• The camera unit may be not registered to the parent unit. Refer to section 4.7 to register the camera unit.
• The parent unit and monitoring camera unit may be out of range with each other. Reduce the distance between
the units, but not closer than 5 feet.
Battery/Charging Indicator or <LOW BATTERY ICON> on the parent unit screen flashes
• Battery pack in the parent unit is running low. Connect the parent unit to the mains power with the supplied
power adaptor for recharging.
The parent unit beeps
• The parent unit may have lost connection with the monitoring camera unit. Reduce the distance bet ween the
parent unit and the camera unit, but not closer than 5 feet.
• The camera unit may be switched off. Press <POWER> key to switch on the camera unit.
• Battery pack in parent unit is running low. Connect the parent unit to the mains power with the supplied power
adaptor for recharging.
• Check whether there is any event triggered, e.g. low battery, sound alert or timer.
Cannot view the video image of baby from the parent unit
• LCD may be turned off. Activate the video feed by pressing <LCD ON/OFF>.
• The parent unit and the monitoring camera unit may be out of range with each other. Reduce the distance
between the units, but not closer than 5 feet.
• Battery pack in parent unit may be drained. Connect the parent unit to the mains power with the supplied power
adaptor for recharging.
Cannot hear sound or baby cry from the parent unit
• The volume level in the parent unit may be set too low, increase the volume level of the parent unit. Refer to
section 3.3 for volume level settings.
• The parent unit and the monitoring camera unit may be out of range with each other. Reduce the distance
between the units, but not closer than 5 feet.
The baby monitor system produces a high-pitched noise
• The parent unit and the camera unit may be too close to each other. Make sure the parent unit and camera unit
is at least 5 feet away from each other.
• The speaker volume of the parent unit maybe set too high. Decrease the volume of the parent unit.
Battery pack in the parent unit is running low quickly
• The LCD brightness may be set too high. Try to decrease the brightness level. Refer to section 4.3 for details.
• The volume level of the parent unit may be set too high which consumes power. Decrease the volume level of
the parent unit. Refer to section 3.3 for volume level settings.
Talk back feature does not work
This document contains confidential and proprietary information of VTech Telecommunications Ltd
Doc Title : Product Data – User’s Guide Revision : R.00
Model : MBP28 Page(s) : 14 of 17
• Make sure the camera unit is powered on, and link between parent unit and camera unit is n ormal.
• Check that whether the volume is loud enough at the camera unit, refer to section 3.4.
8 GENERAL INFORMATION
If your product is not working properly...
1. Read this User’s Guide.
2. Visit our website: www.motorola.com
3. Contact Customer Service at
US and Canada 1-888-331-3383 (FOR US VERSION)
UK 0845 218 0890 (FOR UK VERSION)
ROI 08187 62092 (FOR UK VERSION)
To order a replacement battery pack for parent unit, contact customer service.
Consumer Products and Accessories Limited Warranty (“Warranty”)
Thank you for purchasing this Motorola branded product manufactured under license by Binatone Electronics
International LTD ("BINATONE").
What Does this Warranty Cover?
Subject to the exclusions contained below, BINATONE warrants that this Motorola branded product ("Product") or
certified accessory ("Accessory") sold for use with this product that it manufactured to be free from defects in
materials and workmanship under normal consumer usage for the period outlined below. This Warranty is your
exclusive warranty and is not transferable.
Who is covered?
This Warranty extends only to the first consumer purchaser, and is not transferable.
What will BINATONE do?
BINATONE or its authorized distributor at its option and within a commercially reasonable time, will at no charge
repair or replace any Products or Accessories that do not conform to this Warranty. We may use functionally
equivalent reconditioned/ refurbished/ pre-owned or new Products, Accessories or parts.
What Other Limitations Are There?
ANY IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED TO THE DURATION
OF THIS LIMITED WARRANTY, OTHERWISE THE REPAIR OR REPLACEMENT PROVIDED UNDER THIS
EXPRESS LIMITED WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER, AND IS PROVIDED IN
LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED. IN NO EVENT SHALL MOTOROLA OR
BINATONE BE LIABLE, WHETHER IN CONTRACT OR TORT (INCLUDING NEGLIGENCE) FOR DAMAGES IN
EXCESS OF THE PURCHASE PRICE OF THE PRODUCT OR ACCESSORY, OR FOR ANY INDIRECT,
INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES OF ANY KIND, OR LOSS OF REVENUE OR
PROFITS, LOSS OF BUSINESS, LOSS OF INFORMATION OR OTHER FINANCIAL LOSS ARISING OUT OF OR
IN CONNECTION WITH THE ABILITY OR INABILITY TO USE THE PRODUCTS OR ACCESSORIES TO THE
FULL EXTENT THESE DAMAGES MAY BE DISCLAIMED BY LAW.
Some jurisdictions do not allow the limitation or exclusion of incidental or consequential damag es, or limitation on
the length of an implied warranty, so the above limitations or exclusions may not apply to you. This Warranty gives
you specific legal rights, and you may also have other rights that vary from one jurisdiction to another.
Products Covered Length of Coverage
Consumer Products
One (1) year from the date of the products
original purchase by the first consumer
purchaser of the product.
Consumer Accessories
Ninety (90) days from the date of the
accessories original purchase by the first
consumer purchaser of the product.
Consumer Products and Accessories The balance of the original warranty or for
This document contains confidential and proprietary information of VTech Telecommunications Ltd
Doc Title : Product Data – User’s Guide Revision : R.00
Model : MBP28 Page(s) : 15 of 17
that are Repaired or Replaced
ninety (90) days from the date returned to the
consumer, whichever is longer.
Exclusions
Normal Wear and Tear. Periodic maintenance, repair and replacement of parts due to normal wear and tear are
excluded from coverage.
Batteries. Only batteries whose fully charged capacity falls below 80% of their rated capacity and batteries that
leak are covered by this Warranty.
Abuse & Misuse. Defects or damage that result from: (a) improper operation, storage, misuse or abuse, accident
or neglect, such as physical damage (cracks, scratches, etc.) to the surface of the product resul t ing from misuse;
(b) contact with liquid, water, rain, extreme humidity or heavy perspiration, sand, dirt or the like, extreme heat, or
food; (c) use of the Products or Accessories for commercial purposes or subjecting the Product or Accessory to
abnormal usage or conditions; or (d) other acts which are not the fault of MOTOROLA or BINATONE., are
excluded from coverage.
Use of Non-Motorola branded Products and Accessories. Defects or damage that result from the use of NonMotorola branded or certified Products or Accessories or other peripheral equipment are excluded from coverage.
Unauthorized Service or Modification. Defects or damages resulting from serv ice, testing, adjustment,
installation, maintenance, alteration, or modification in any way by someone other than MOTOROLA, BINATONE
or its authorized service centers, are excluded from coverage.
Altered Products. Products or Accessories with (a) serial numbers or date tags that have been removed, altered
or obliterated; (b) broken seals or that show evidence of tampering; (c) mismatched board serial numbers; or (d)
nonconforming or non-Motorola branded housings, or part s, are e x cluded from coverage.
Communication Services. Defects, damages, or the failure of Products or Accessories due to any communication
service or signal you may subscribe to or use with the Products or Accessories is excluded from coverage.
How to Obtain Warranty Service or Other Information?
To obtain service or information, please call:
US and Canada 1888-331-3383 (FOR US VERSION)
UK 0845 218 0890 (FOR UK VERSION)
ROI 08187 62092 (FOR UK VERSION)
You will receive instructions on how to ship the Products or Accessories at your expense and risk, to a BINATONE
Authorized Repair Center.
To obtain service, you must include: (a) the Product or Accessory; (b) the original proof of purchase (receipt) which
includes the date, place and seller of the Product; (c) if a warranty card was included in your box, a completed
warranty card showing the serial number of the Product; (d) a written description of the problem; and, most
importantly; (e) your address and telephone number.
These terms and conditions constitute the complete warranty agreement between you and BINATONE regarding
the Products or Accessories purchased by you, and supersede any prior agreement or representations, including
representations made in any literature publications or promotional materials issued by BINATONE or
representations made by any agent, employee or staff of BINATONE, that may have been made in connection with
the said purchase.
FCC, ACTA and Industry Canada (IC) Regulations
(FOR US VERSION ONLY)
Warning: Changes or modifications to this equipment not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following measures:
* Reorient or relocate the receiving antenna.
This document contains confidential and proprietary information of VTech Telecommunications Ltd
Doc Title : Product Data – User’s Guide Revision : R.00
Model : MBP28 Page(s) : 16 of 17
* Increase the separation between the equipment and receiver.
* Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
* Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following
two conditions: (1) this device may not cause interference, and (2) this device must accept any interference,
including interference that may cause undesired operation of the device.
This Class B digital apparatus complies with Canadian ICES-003
Caution: To maintain the compliance with the FCC’s RF exposure guideline, place the came ra unit at least 20 cm
from nearby persons.
For body worn operation, the parent unit has been tested and meets the FCC RF exposure guidelines when used
with the belt clip supplied or designated for this product. Use of other accessories may not ensure compliance with
FCC RF exposure guidelines.
9 TECHNICAL SPECIFICATIONS
(For US version)
Camera Unit:
Frequency
Channels
Operating temperature
Image sensor
Lens
IR LED
Camera unit voltage
(AC voltage, 50/60Hz)
Camera unit voltage
(Adapter output)
Parent Unit :
Frequency
1921.536 MHz - 1928.448 MHz
5
5°C to 40°C
Color CMOS 0.3M Pixels
f 3.6mm, F 2.4
4 pcs
100 – 240V
6V DC, 600mA
1921.536 MHz – 1928.448 MHz
Channels
Operating temperature
Display
Display color
Brightness control
Parent unit voltage
This document contains confidential and proprietary information of VTech Telecommunications Ltd
5
5°C to 40°C
1.8” TFT LCD
65K color LCD
5 steps
2.4V 750mAh Ni-MH battery pack
Doc Title : Product Data – User’s Guide Revision : R.00
Model : MBP28 Page(s) : 17 of 17
Parent unit voltage
(AC voltage, 50/60Hz)
Parent unit voltage
(Adapter output)
(For UK version)
Camera Unit:
100 – 240V
6V DC, 600mA
Frequency
Channels
Operating temperature
Image sensor
Lens
IR LED
Camera unit voltage
(AC voltage, 50/60Hz)
Camera unit voltage
(Adapter output)
Parent Unit :
Frequency
Channels
Operating temperature
Display
1881.792 - 1897.344 MHz
10
5°C to 45°C
Color CMOS 0.3M Pixels
f 3.6mm, F 2.4
4 pcs
100 – 240V
6V DC, 600mA
1881.792 - 1897.344 MHz
10
5°C to 45°C
1.8” TFT LCD
Display colour
Brightness control
Parent unit voltage
Parent unit voltage
(AC voltage, 50/60Hz)
Parent unit voltage
(Adapter output)
2.4V 750mAh Ni-MH battery pack
<BYD:H-AAA750BX2-LI30-2 / CORUN:KH-44AAA750*2>
65K colour LCD
5 steps
110 – 240V
6V DC, 600mA
MOTOROLA
Manufactured, distributed or sold by Binatone Electronics International LTD., official licensee for this product.
MOTOROLA and the Stylized M Logo are trademarks or registered trademarks of Motorola Trademark Holdings,
LLC. and are used under license. All other trademarks are the property of their respective owners.
© 2012 Motorola Mobility, Inc. All rights reserved.
Version 1.0
Printed in China
This document contains confidential and proprietary information of VTech Telecommunications Ltd
Loading...