Binatone Lifestyle 1910 User Manual

THIS EQUIPMENT IS NOT DESIGNED FOR MAKING EMERGENCY TELEPHONE CALLS WHEN THE POWER FAILS. ALTERNATIVE ARRANGEMENTS SHOULD BE MADE FOR ACCESS TO DIAL EMERGENCY SERVICES.

Before operating this set,

please read these instructions carefully.

1 2

5.4 EDIT A PHONEBOOK ENTRY.................................................................................... 1

5.5 D

ELETE A PHONEBOOK ENTRY.............................................................................. 1

5.6 D

ELETE

5.7 C

HECK THE PHONEBOOK USAGE.......................................................................... 1

CALLER DISPLAY (NETWORK DEPENDENT)

...............................................1

6.1 VIEW THE CALL LIST................................................................................................. 1

6.2 S

TORE A CALL LIST NUMBER INTO THE PHONEBOOK........................................1

6.3 D

ELETE AN ENTRY IN THE CALL LIST.................................................................... 1

6.4 D

ELETE

7 PHONE SETTINGS

...........................................................................................1

7.1 D

ATE AND TIME SETTINGS ......................................................................................1

7.1.1 C

HANGE THE DATE FORMAT................................................................................. 1

7.1.2 C

HANGE THE TIME FORMAT.................................................................................. 1

7.1.3 S

ET THE TIME...........................................................................................................1

7.1.4 S

ET THE DATE..........................................................................................................19

7.2 A

LARM SETTINGS......................................................................................................

7.2.1 T

URN ON/OFF THE ALARM..................................................................................... 20

7.2.2 S

ET THE ALARM TIME............................................................................................. 20

7.3 H

ANDSET SETTINGS.................................................................................................

7.3.1 S

ET THE RINGER FOR INTERNAL CALLS ........................ .................

7.3.2 S

ET THE RINGER MELODY FOR EXTERNAL CALLS ............................................

7.3.3 S

ET THE RINGER VOLUME.....................................................................................

7.3.4 S

ET ALERT TONES...................................................................................................

7.3.5 S

ET THE HANDSET LANGUAGE.............................................................................

7.3.6 R

ENAME THE HANDSET..........................................................................................

7.3.7 C

HOOSE THE INFORMATION TO BE DISPLAYED IN IDLE...................................

7.3.8 S

ET THE AUTO ANSWER ........................................................................................

7.4 B

ASE SETTINGS ........................................................................................................ 22

21 21 22

8 8

9 9

21 21

7.4. D

E-REGISTER A HANDSET..................................................................................... 22

7.4. C

HANGE THE DIAL MODE.......................................................................................

7.4. C

HANGE THE FLASH (RECALL)TIME.....................................................................

7.4. C

HANGE THE SYSTEM PIN CODE ......................................................................... 23

7.5 R

EGISTRATION ..........................................................................................................24

7.6 R

ESET YOUR PHONE ................................................................................................24

1 2 3 4

USER GUIDE

3 GETTING TO KNOW YOUR PHONE

3.1 Handset Overview

3.5 Text and Digit Entry Table

The following table shows you where each letter and punctuation character can be found, by using repeated presses of the alphanumeric keypad. This will be helpful when storing a name in the

phonebook and renaming your handset. In editing mode, a cursor is displayed to indicate the current text entry position. It is positioned at the right of the last character entered.

Writing Tips:

1. Once a character is selected, the cursor will move to the next position after a

short pause.

2. You can move the cursor within the text with the <UP/DOWN> keys to

amend the text entry.

3. Press <C> to delete the last character.

4. Press and hold <C> to delete the entire text string.

4.3 End a Call

During a call press <TALK OFF> to end the call. OR Put the handset on the base station or charger to end the call.

4.4 Adjust Volume

There are 5 levels (VOLUME 1 to VOLUME 5) to choose from for the earpiece

During a call:

setting is shown.

When you end the call, the setting will remain at the last selected level.

4.5 Mute a Call

You can talk to someone nearby without letting the caller hear you during a call. During a call: Press <C> to mute the microphone and “MUTED” will display on the LCD. Your caller cannot hear you. Press <C> again to unmute the microphone.

4.6 the

In idle, press and hold <HASH/#> to turn off the handset ringer. The “RINGER OFF”

or speakerphone volume.

icon is displayed on the LCD.

4.7 Turn on the Keypad Lock

In idle, press and hold <STAR/*> to turn on the keypad lock. The

4.8 Redial the last number

You can redial any of the 5 last numbers called. If you have stored a name in the phonebook to go with the number, the name will be displayed instead.

4.8.1 Redial a Number from the Redial List

1. In idle mode, press <DOWN> to access the redial list. Note: If the redial list entry shows a name, press <Hash/#> to view the number

2. Press <UP/DOWN> to browse the redial list.

3. Press <TALK ON> or <SPEAKERPHONE> to dial to the selected redial number. Note: If there are no numbers in the redial list, the display shows “EMPTY

”

4.8.2 Store a Redial Number into the Phonebook

1. Follow Steps 1 and 2 in section 4.8.1.

2. Press <MENU> and <UP/DOWN> to select ADD TO PB.

3. Press <OK> and then enter the name you want to use in the phonebook.

4. Press <OK> and then modify the number, if necessary.

5. Press <OK> to show <MELODY 1>.

6. Press <UP/DOWN> to browse the ringtone list. The respective ringtone will be played when browsing the ringtone list. (Note: the selected melody will

7. Press <OK> to confirm, and the entry will be stored.

Note: The display will still flash the Call icon and show CALL or the Caller Display

number, when there is an incoming call, even if the ringer is turned off To turn the ringer back on, press and hold <HASH/#> again.

Note: You can still use <TALK ON> or <SPEAKERPHONE> to answer a call

To turn the keypad lock off, press and hold <STAR/*> again.

only be played if you subscribe to Caller Display and the incoming number

icon is displayed on the LCD.

The most recent last number will display at the top of the redial list.

of this entry.

matches the

stored number.)

4.8.3 Delete a Redial Number

1. Follow Steps 1 and 2 in section 4.8.1

2. Press <MENU> and <UP/DOWN> to select DELETE.

3. Press <OK> to confirm, and the entry will be deleted.

4.9 Find the Handset

You can locate the handset by pressing <PAGE> on the base station. All the handsets registered to the base will produce the paging tone and show

4.8.4

Delete all Redial List entries

1. In idle mode, press <DOWN> to access the redial list.

2. Press <MENU> and <UP/DOWN> to select DELETE ALL

3. Press <OK> to display <CONFIRM?>.

4. Press <OK> to confirm. All entries will be deleted and the display will show <EMPTY>.

<TALK OFF> /<C> on any handset or <PAGE> on the base again.

Note: If there is an incoming call during paging, the phone will ring with the

4.10 Make an Internal Call (For multi-handset versions only)

This feature is only applicable when there are at least two registered handsets. It allows you to make internal calls, transfer external calls from one handset to

incoming call instead of paging.

LOCK”

"PAGING" on the display. You can stop the paging by pressing <TALKON>/

another handset and make conference calls. If the called handset is not answered within 60 seconds, the called handset will stop ringing and the calling

Note: If only one handset is registered to the base station, when <C/MUTE/INT>

is pressed, it will display “NOT POSSIBLE”

4.10.1 Intercom Another Handset

1. In idle mode, press <C/MUTE/INT>

and all the other registered handset

2. Enter the number of the handset that you want to call, or enter "9" to call all

3. The called handset rings and <TALK ON> or <SPEAKERPHONE> must be

Note: If only two handsets are registered to the base station, pressing

<C/MUTE/INT> will call the other handset immediately.

numbers will display, along with a "9".

to establish the intercom call.

4.10.3 Transfer an External Call to another handset During an external call:

1. Press <MENU> and <UP/DOWN> to select INTERCOM

2. Press <OK> to show all the other registered handset numbers, plus "9".

3. The external call is put on hold automatically and the called handset rings.

4. Press <TALK ON> or <SPEAKERPHONE> on the called handset to establish

Enter the number for the handset you

want to transfer the call to.

handset will return to

standby mode.

handsets.

5. Press <TALK OFF> on the calling handset or put the calling handset on the charging cradle to end the current call with the external party.

6. The external call is transferred to the called handset.

4.10.2 Call All Handsets

1. In idle mode, press <C/MUTE/INT> and the registered handsets will display.

2. Press digit key <9> to ring to all registered handsets

4.10.4 Make a 3-way Conference Call

The conference call feature allows one external call to be shared with two handsets (in intercom). The three parties can share the conversation and no additional network subscription is required.

During an external call:

Follow Steps 1 to 4 in section 4.10.3.

2. Press and hold <STAR> on the calling handset to establish the conference call

Either handset can exit the conference by pressing <TALK OFF>, leaving the other handset still connected to the

external call.

5 PRIVATE PHONEBOOK

Each handset can store numbers. Each phonebook entry can have a maximum of 20 digits for the phone number and 12 characters for the name. You can also select different ringtones for your phonebook entries. (Note: the different ringtones only play if

5.1 Add a New Phonebook Entry

In idle:

PHONEBOOK and then press

<OK> to access the phonebook.

2. Press <MENU> to show ADD.

3. Press <OK> and then enter the name.

4. Press <OK> and then enter the number.

5. Press <OK> and <UP/DOWN> to select the desired ringtone for your

6. Press <OK> to store the phonebook entry.

you subscribe to Caller Display and

the incoming number matches the stored

number.) Phonebook entries are stored alphabetically by name.

phonebook entry.

5.2 Search a Phonebook Entry

In idle:

1. Press <MENU> then <UP/DOWN> to select PHONEBOOK and then press

2. Enter the first letter of the name using the alphanumeric keys(e.g. if it

want.

5.3 View a Phonebook Entry

In idle:

1. Press <MENU> then <UP/DOWN> to select PHONEBOOK and then press <OK> to access the phonebook.

2. Press <UP/DOWN> to select the desired phonebook entry.

3. Press <MENU> and <UP/DOWN> to select VIEW.

4. Press <OK> and <UP/DOWN> to review the name, number and ringtone of the selected phonebook entry.

Note: If the number is more than 12 digits, press <LEFT SOFT KEY> or

<RIGHT SOFT KEY> to view the remaining digits.

pressed on that handset

an internal call.

handset is ringing.

when the

ALL PHONEBOOK ENTRIES.......................................................................

.......................................................1

ALL CALL LIST ENTRIES

................

MELODY ....

Speakerphone

Your hands et's louds

peake r is on.

Speakerphone

Your hands et's louds

peake r is on.

ress <UP/DOWN> to select volume 1-5. The current

Turn off Handset Ringer

Note: If there is an external call while you are on an intercom call, you'll

hear warning beeps, and you have to end the intercom all, before you can c

answer the external call.

Note: If the other handset has not answered the intercom call, you can stop the intercom and return to the external call by pressing <TALK OFF>

and then <UP/DOWN> to scroll to the entry you

begins with C, press the 2 key three times),

up to 0 private phonebook entries with names and

...................................................................................

ANSWERING MACHINE

Remote operation

Using a tone-dialling phone, dial your home number

You can also use the codes on the other side of this card

While your outgoing message is playing, press

Key in your remote security code

The default code is 0000. For details of how to set a new code,

see the User Guide 8.5.9.1 on page 31.

Note: <*> key must be entered while the OGM is still playing, and the 4-digit

consecutively, the line will be released

Note: If your answering machine is switched off, the phone will enter into

the remote access mode after 10 rings.

You can then enter the 4-digit remote access PIN

(Default Remote Access PIN is 0000) to activate the remote access feature.

system

Lifestyle 191

7 7 7 7

.....................................................................................

Remote ..Card .............

The

PIN should follow without any delays.. If the 4-digit Remote Access

PIN is entered incorrectly three times

automatically.

Or visit our website: www.binatoneonline.com

Package contents The package contains the following items:

• 1 Handset

• 1 Base station

• 1 Mains power adapter

• 1 Telephone line cord

• 1 rechargeable battery pack

• 1 User manual Note: If you have a Twin, Triple or Quad system, you will also have the requisite

extra handset(s) and batter , and a charger pod for each extra handset. ies

TROUBLESHOOTING

DECLARATION OF CONFORMITY

.....................................................................................

.................................................................

GUARANTEE AND SERVICE

........................................................................

To use your handset and base together, you must be able to establish a radio link between them. The signal between the handset and the base is in accordance with the normal standards for a DECT phone: Maximum range up to 300 metres outdoors or 50 metres indoors. The signal range may decrease if there is any large metal object between the handset and the base, such as a refrigerator, a mirror, a filing cabinet, metallic doors or reinforced concrete. The signal strength may also be reduced by other solid structures like walls, or by other radio or electrical interference.

Digital Cordless Telephone

Lifestyle 1910 system

Binatone Helpline (for UK only)

Monday to Friday from 9:00am to 5:00pm Tel: 0845 345 9677 **Please note that all calls are charged at local rate

TECHNICAL DETAILS

Standard

Frequency range

Channel bandwidth

Operating range

Operating time

Temperature range

Digital Enhanced Cordless Telecommunication(DECT)

1.88 to 1.9GHz

1.728 MHz Up to 300m outdoors;

up to 50mindoors

Standby: 100 hours,

Talking: 10 hours Battery charge time:15 hours Operating 0 Cto 40 C

(bandwidth =20 MHz)

Port specification

The port (connec ted to the mains power supply) is a

SELV port with respect to EN41003.

CLEANING AND CARE

Do not clean any part of your Lifestyle 19 0 system with benzene, thinners or other

solvent chemicals - this may cause permanent damage which is not covered by the

Guarantee.

When necessary, clean it with a damp cloth. Keep your Lifestyle 1910 system away from hot, humid conditions

strong

and don't let it get wet.

Every effort has been made to ensure high standards of reliability for your

consult your supplier or the Helpline.

do not try to

Electrical power

TenPao - S002CV0600030 / S002CB0600030 Charger unit:

HONR – ADS-3V-06 06018 GPB / ADS-3V-06 06018 GPG

TenPao - S002CV0600030 / S002CB0600030 Battery Information

GPI – VTHC043C02, Type NiMH (Rechargeable battery) Voltage Rating 400m Ah 2.4V AAA Size Pack BYD- H-AAA400BX2, Type NiMH (Rechargeable battery) Voltage Rating 400mAh 2.4V AAA Size Pack CORUN- Ni-MHAAA400*2, Type NiMH (Rechargeable battery) Voltage Rating

400mAh 2.4V AAA Size Pack

Base unit: HONR – ADS-3V-06 06018 GPB / ADS-3V-06 06018 GPG input 100-240VAC 50/60Hz 100mA, output 6VDC 300mA

input 100-240VAC 50/60Hz 100mA, output 6VDC 300mA

, Storage -20 Cto 60 C

input 100-240VAC 50/60Hz 100mA, output 6VDC 300mA

Caution

Risk of explosion if battery is replaced by an incorrect type Dispose of used batteries according to the instructions.

The port (connected to the telephone line) is aTNV port with respect to EN41003.

Lifestyle 1910 system. However, if something does go wrong, please

repair it yourself,

sunlight,

with Answering Machine

............................................................25 8.1 TURN ON/OFF THE ANSWERING MACHINE

................................25 8.2 LISTEN TO THE MESSAGES IN THE ANSWERING MACHINE

.....................................26 8.3 DELETE ALL MESSAGES IN THE ANSWERING MACHINE

.................................................................. ........................................26 8.4 RECORD MEMO

8.5 ANSWERING MACHINE SETTINGS .............................................................. ............ 27

3.2 Base Station Overview

Press the Page button on the base station to page your handset(s). It will ring for approximately 60 seconds.

2. CHARGING CRADLE

3.3 Display Icons and Symbols

The LCD display gives you information on the current status of the telephone.

Scroll up / down the menu items / Phonebook list / Redial list / Call List Steady when the handset is in range of the base. Flashes w hen out of

Steady when an intercom call is in progress. Flashes when there is an incoming internal call.

Indicates a call is in progress on that handset.

ndicates that the ringer is switched off.

Steady when an alarm is set. Flashes when the alarm is sounding.

Indicates that the keypad is locked. Indicates when you have a new Voice Mail message. (This is a Caller Display service and is not usually available from

range of the base or not registered to the base.

UK network providers.) Indicates when the battery is fully charged. Whole icon flashes when the battery s charging. Internal block icon flashes when the battery is in final charging stage.

Indicates when the battery needs charging. Flashes when low battery power level is detected.

(BACK)

(INT)

Indicates when there are more characters or numbers in front of those

Indicates when there are more characters or numbers after those being

Press the MENU/OK key to access the main menu. Press the MENU/OK key to confirm the current selection.

Indicates new TAM message / new call in TAM message list / call list.

Press the C/MUTE key to start an intercom call.

Press the C/MUTE key to go back to the previous menu level or cancel

Press the C/MUTE key to clear a character, stop the alarm, or mute/unmute

being

displayed.

the current action.

the microphone during a call.

3.4 Menu Structure

In idle mode, press <MENU/OK>

Refer to the

following for the menu structure.

ADD TO PB DELETE DELETE ALL

DETAILS

Press and hold to put base into registration mode.

handset

to go to CALL LIST, the first option in the menu list. Press <UP> or <DOWN> to go to other options in the menu list. Press <OK> to enter a sub-menu or function. Press <Back> to go back to the previous level.

Shows EMPTY or the first Call List Entry. Then

<OK> for:

Main Menu

CALLLIST

PHONEBOOK

BS SETTINGSHSSETTIN

REGISTRATION

DEFAULT

ANS.MACHINE

Sub menu

PIN?- - - -

MSGPLAYBACK DELETEALL MEMO TAMON/OFF TAMSETTINGS

ANSWERMODE TAMLANGUAGE OGMSETTINGS ANSWERDELAY RECORDTIME REMOTEACC

CHANGEPIN

PIN?- - - -

Key Press

<MENU>

<UP/

DOWN>

<UP/

DOWN>

<UP/

DOWN>

<UP/

DOWN>

<UP/

DOWN>

phonebook Entry.

ADD VIEW EDIT DELETE DELETE ALL PB STATUS

Shows EMPTY or the first

Then

<OK> for:

ADD PB STATUS or

DELETEHS DIALMODE FLASHTIME CHANGE PIN

ALARM RING SETUP TONE SETUP LANGUAGE RENAME HS HS DISPLAY AUTO ANSWER DATE & TIME

your answering machine (TAM) is

on and flashes when a message.

Indicates that

there is new

FIND / <PAGE>

Flashes when there is an incoming external call. Indicates handset is in speakerphone mode.

1. Press <MENU> then <UP/DOWN> to select

<OK> to access the phonebook.

Answering Machine (TAM) Control

Notes:

1. All the keys on the handset back have no functions during a call.

2. All the keys on the handset back are valid in idle mode and during message playback mode.

3. When alarm time arrives, pressing any key on the handset back will stop the alarm (if snooze is off).

PLAY/STOP

SKIP BACKWARD

To repeat a message during

In idle:Press to play the TAM message In TAM message playback mode:Press to stop the message playback

playback

SKIP FORWARD

To skip to the next message during

Increase the speaker volume during

TWO-WAY KEY: UP

voice message playback; Increase the handset ringer volume during ringing

DOWN

Decrease the speaker volume during voice message playback; Decrease the handset ringer volume during ringing

DELETE

Press once to delete the current message during playback. In Idle: Press and hold to delete all old

Note: New voice messages will not be deleted.

On Steadily: When TAM is on Flashes: When new TAM message is received.

TAM LED -

Press twice to skip back to the previous message

playback

voice messages.

1 IMPORTANT SAFETY INSTRUCTIONS

When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury, including the

1) Read and understand all the instructions.

2) Follow all warnings and instructions marked on the product.

3) Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.

sink, swimming pool).

5) Do not overload wall outlets and extension cords as this can result in the risk of fire or electric shock.

6) Unplug this product from the wall outlet and refer servicing to our Repair

• When the power supply cord or plug is damaged or frayed.

• If the product does not operate normally by following the operating instructions.

• If the product has been dropped and the cabinet has been damaged.

• If the product exhibits a distinct change in performance.

7) NEVER use your Lifestyle 191

8) Do not use the telephone to report a gas leak in the vicinity of the leak.

9) Use only the supplied NiMH (Nickel Metal Hydride) batteries! The operation periods for the handsets are only applicable with the default battery capacities

10) The use of other battery types or non-rechargeable batteries/primary cells can be dangerous. These may cause interference and/or damage to the unit or surroundings. The manufacturer will not be held liable for damage arising from such non-compliance.

11) Do not use third party charging bays. Damage may be caused to the batteries.

12) Please ensure the battery plug is inserted correctly into the socket.

13) Dispose of batteries safely. Do not immerse them in water, burn them, or put them

where they could get

punctured.

Centre under the

following conditions:

following:

near water (for example, near

a bath tub, kitchen

Keep your Lifestyle 1910 away from hot, humid conditions or strong sunlight,

se this product and don't let it get wet or u

base from the telephone line and the mains socket when there are storms

in your area. Damage caused by l ightning is not covered by the guarantee.

0 outdoors during a thunderstorm-unplug the

2 INSTALLING YOUR PHONE

2.1 Connecting the base station

1) Plug the power supply

and line cord

2) Plug the power adapter into a 230Vac,

3) Always use the cables provided in the box Warning: Use only the provided adaptor, using other power supplies may cause a hazard.

50Hz mains socket, and the line cord into your

2.2 Installing and charging the batteries

1) Place the supplied battery pack into the battery

3) Put the handset on the base and charge for

16 hours before using the handset for the first time.

If you have a

Broadband line

If you connect your telephone to a line with

insert a micro-filter between the telephone and the telephone line, otherwise you may get interference between the telephone and the broadband, which could cause problems.

a broadband connection, you will need to

telephone line socket.

Warning: Install the base unit in a position where

will reach an easily

mains power Note: The base unit needs mains power for normal operation, not just for charging the handset batteries.

Use only the NiMH rechargeable battery type

2) Position the battery compartment cover over the

In a home with broadband, every telephone must have a micro-filter connected, not just the one at the telephone point that your modem is connected to. If you need more broadband micro-filters, contact your broadband supplier.

compartment with the plug inserted

The handset will give a beep when it is properly

into the base station.

cable.

correctly

into the socket.

atteries and slide up to click into place.

placed on the base or charger.

the mains adapter plug accessible mains socket. Never try to lengthen the

provided.

MENU/OK

In idle mode:Press to access the main menu In sub-menu mode: Press to confirm the selection During a call: Press to access Intercom/Phonebook/ Redial List/ Call List

In idle mode: Press to access the call list In menu mode: Press to scroll up the menu items

In Phonebook list / Redial list / Call List: Press to scroll up the list During a call: Press to increase the earpiece volume During ringing: Press to increase the ringer volume

TALK ON

In idle / predialing mode: Press to make a call In Redial list / Call List / Phonebook : Press to make a call to the

ed entry in the list During ringing: Press to answer a call

list

display

RECALL(also called FLASH)

In idle / predialing mode: Press to insert a recall During a call:Press to send a recall(flash)

TALK OFF

During a call: Press to end a call and go back to idle screen In menu / editing mode: Press to go back to previous menu In idle mode: Press and hold to power off the handset

DOWN

In idle mode:Press to access the redial list In menu mode: Press to scroll down the menu items In Phonebook list / Redial list / Call List: Press to scroll down the list During a call: Press to decrease the earpiece volume During ringing: Press to decrease the ringer volume

CLEAR/MUTE/INTERCOM

In sub-menu mode: Press to go back to previous level In sub-menu mode: Press and hold to go back to idle screen In editing / predialing mode: Press to clear a character / digit In editing / predialing mode: Press and hold to delete all the characters / digits During a call: Press to mute/ unmute the microphone In idle mode:Press to intercom another handset

In main menu mode: Press to go back to idle screen

singal.(you may need the recall function if your phone is connected to a PBX or you use BT Calling features.

SPEAKERPHONE

During a call: Press to turn on / off the speakerphone. Call List / Phonebook entry : Press to make a call with speakerphone During ringing: Press to answer a call with speakerphone During answering machine message playback / call screening: Press to play message via speaker

(Note: If the handset is powered off, put it on charge on the base or a charger pod to turn it back on.)

3.5.1 Character Set

Key Press

1st 2

3rd 4th 5th 6th 7th 8th 9th 10th 1 space - 1 1 2 A B C 2 2 3

D E F 3 3 4 G H I 4 4 5 J K L 5 5 6 M N O 6 6 7 P Q R S 7 7 8 T U V 8 8 9 W X Y Z 9 9 0 0,or P (Pause) if press and hold *

? / \

( ) *

Alphanumeric Editing

(For phonebook name editing and renaming handset )

Number Editing (For phone

number editing,date/time editing)

# o ' , - , &

Note: There are some different characters if the handset language is changed

(page 21).

.....................................................................................1

Remote ..6Card .............

TABLE OF CONTENTS

IMPORTANT SAFETY INSTRUCTIONS

...........................................................

INSTALLING YOUR PHONE

............................................................................5

2.1 CONNECTING THE BASE STATION.......................................................................... 5

2.2 I

NSTALLING AND CHARGING THE BATTERIES......................................................5

GETTING TO KNOW YOUR PHONE

................................................................6

3.1 H

ANDSET OVERVIEW

................................................................................................6

3.2 B

ASE STATION OVERVIEW

.....................................................................................

3. D

ISPLAY ICONS AND SYMBOLS

...............................................................................8

3. M

ENU STRUCTURE

....................................................................................................

3. T

EXT AND DIGIT ENTRY TABLE

...............................................................................10

USING YOUR PHONE

......................................................................................1

4.1 MAKE A CALL............................................................................................................. 1

4.1.1 P

REPARATORY DIALLING.......................................................................................

4.1.2 D

IRECT DIALLING.....................................................................................................

4.1.3 C

ALL FROM THE PHONEBOOK...............................................................................1 1

4.1.4 C

ALL FROM THE CALL LIST

................................................................................

4.1.5 C

ALL FROM THE REDIAL LIST

4.1.6 C

ALL TIMER.............................................................................................................. 11

4.2 A

NSWER A CALL....................................................................................................... 11

4.3 E

ND A CALL................................................................................................................12

4.4 A

DJUST EARPIECE VOLUME....................................................................................12

4.5 M

UTE A CALL............................................................................................................. 12

4.6 ..................................................................................12

4.7 T

URN ON THE KEYPAD LOCK..................................................................................

4.8 R

EDIAL THE LAST NUMBER.....................................................................................12

4.8.1 R

EDIAL A NUMBER FROM THE REDIAL LIST.........................................................12

4.8.2 S

TORE A REDIAL NUMBER INTO THE PHONEBOOK

4.8.3 D

ELETE A REDIAL NUMBER .................................................................................. 13

4.8.4 D

ELETE

...................................................................... 13

4.9 F

IND THE HANDSET...................................................................................................13

4.10 M

AKE AN INTERNAL CALL(FOR MULTI-HANDSET VERSIONS ONLY )................ .13

4.10.1 I

NTERCOM ANOTHER HANDSET..........................................................................14

4.10.2 C

ALL ALL HANDSETS.............................................................................................14

4.10.3

RANSFER AN EXTERNAL CALL TO ANOTHER HANDSET................................14

4.10.4 M

AKE A 3-WAY CONFERENCE CALL....................................................................14

PRIVATE PHONEBOOK...................................................................................1

5.3 VIEW A PHONEBOOK ENTRY...................................................................................15

5.1 ADD A NEW PHONEBOOK ENTRY...........................................................................15

5.2

SEARCH FOR A PHONEBOOK ENTRY....................................................................15

3 4 5

(ONLY AVAILABLE WITH CALLER DISPLAY) ......

...

TURN OFF HANDSET RINGER

ALL REDIAL LIST ENTRIES

..........................................

CHARACTER SET

3.5.1 .....................................................................................................

COMPRESSION

4 USING YOUR PHONE

4.1 Make a Call

4.1.1 Preparatory Dialling Enter the phone number and press <TALK ON> or <SPEAKERPHONE>

dial the number. When entering the number,

if you

to delete digits.

4.1.2 Direct Dia ling Press <TALK ON> or <SPEAKERPHONE> to connect to the line and then

4.1.3 Call from the phonebook Press <MENU/OK>, then <DOWN>, then <MENU/OK> again to access the phonebook and press <UP/DOWN> to Press <TALK ON> or <SPEAKERPHONE> to dial out the selected phonebook

entry.

(Note: if you enter a wrong digit you cannot correct it with the <C> key.)

select

the desired phonebook entry.

4.1.4 Call from the Call List (only available with Caller Display) Press <UP> to access the Call List and press <UP/DOWN> to select the desired

Press <TALK ON> or <SPEAKERPHONE> to dial out the selected Call List entry. Note: You can also access the Call List by pressing <MENU/OK> twice.

4.1.5 Call from the redial list Press <DOWN> to access the redial list and press <UP/DOWN> to select the

Note: The alphanumeric keys provide a short-cut to find entries beginning with

the corresponding letters.

Call List entry.

desired redial number. Press <TALK ON> or <SPEAKERPHONE> to dial out the selected redial number.

4.1.6 Call timer Your handset automatically times the duration of every call. The call timer is displayed as soon as you answer a call or 15 seconds after

It is shown in hours, minutes and seconds

4.2 Answer a Call

If the handset is not on the charging cradle: When the phone rings, press <TALK ON> or <SPEAKERPHONE> to answer a call. Note: If AUTO ANSWER is set to ON, then lifting the handset off the base or

charger will answer the call automatically, and no buttons need to be

format (HH:MM:SS).

pressed.

enter the phone number.

to connect to the line and to make a mistake, press <C>

dialling and remains on the screen for 5 seconds after the end of the call.

If the call is from someone who withheld their number, e.g. by dialling 141,

will display.

If the call is from someone whose number is unavailable, e.g. an international call or from a private exchange, “OUT OF AREA” will display. If you've got new Caller Display records, the handset will display "X NEW

6.1 View the Call List

CALLS" in standby mode. The New Calls

indication will remain until all the new

call records have been viewed on that handset.

1. Press <UP> to access the call list. OR Press <MENU> and <UP/DOWN> to show CALL LIST, then press OK.

2. Press <UP/DOWN> to select the desired entry.

3. Press <#> to view the caller’s number if applicable.

6.2 Store a Call List Number into the Phonebook

1. Follow Steps 1 and 2 in Section 6.1.

2. Press <MENU> and <UP/DOWN> to show ADD TO PB.

3. Press <OK> and then enter the name.

4. Press <OK> and the selected call list number is displayed.

5. Edit the number if necessary.

6. Press <OK> and <UP/DOWN> to select the ringtone.

7. Press <OK> to store the phonebook entry and return to the calls list.

4. Press <MENU>, <UP/DOWN> to show , and then <OK> to display the date and time of the call. Press <OK> to go back to the previous screen.

6.3 Delete an entry in the Call List

1. Follow Steps 1 and 2 in Section 6.1.

2. Press <MENU> and <UP/DOWN> to select DELETE.

3. Press <OK> to confirm.

6.4 Delete

1. Follow Steps 1 and 2 in Section 6.1

2. Press <MENU> and <UP/DOWN> to select DELETE ALL.

3. Press <OK> to display CONFIRM?.

4. Press <OK> to confirm. All entries will be deleted and the display will show

EMPTY.

7 PHONE SETTINGS

Your phone comes with a selection of settings that you can change to personalise your phone the way you like it to work.

7.1 Date and Time Settings

If you subscribe to Caller Display the time and date settings will be automatically

updated by the

The Caller Display service only sends the month and date, not the year, so you may need to set the year.

7.1.1 Change the Date Format

1. Press <MENU> and <UP/DOWN> to select HS SETTINGS.

2. Press <OK> and <UP/DOWN> to select DATE & TIME.

3. Press <OK> and <UP/DOWN> to select DATE FORMAT.

4. Press <OK> and <UP/DOWN> to select your desired date format (DD-MM-YYor MM-DD-YY

5. Press <OK> to confirm.

7.1.2 Change the Time Format

1. Press <MENU> and <UP/DOWN> to select HS SETTINGS.

2. Press <OK> and <UP/DOWN> to select DATE & TIME.

3. Press <OK> and <UP/DOWN> to select TIME FORMAT

4. Press <OK> and <UP/DOWN> to select your desired time format

5. Press <OK> to confirm.

7.1.3 Set the Time

1. Press <MENU> and <UP/DOWN> to select HS SETTINGS.

2. Press <OK> and <UP/DOWN> to select DATE & TIME.

3. Press <OK> and <UP/DOWN> to select SET TIME.

4. Press <OK> and then enter the time information in 24 hour format.

5. Press <OK> to confirm.

Note: If time has been set before, the current time will display, otherwise,

“HH:MM”

will display.

7.1.4 Set the Date

1. Press <MENU> and <UP/DOWN> to select HS SETTINGS.

2. Press <OK> and <UP/DOWN> to select DATE & TIME.

3. Press <OK> and <UP/DOWN> to select SET DATE.

4. Press <OK> and then enter the date information. The date entered will be in

5. Press <OK> to confirm.

Note: If date has been set before, the current date will display, otherwise,

the format you set in Section 7.1.1.

“DD-MM-YY ” will display.

7.2 Alarm Settings

You can set an alarm time on the handset. When an alarm is set, the <ALARM Icon> is shown on the handset display. <ALARM icon> and “ALARM ON” flash on the handset display, and the alarm tone rings for 45 seconds. You can press any key to disable the alarm. If the snooze function is activated, the alarm will sound again at the end of the snooze period of seven minutes. You can also press and hold <TALK OFF> while the

Note:

a. A key press will still disable the alarm even if the handset keypad is locked

b. The alarm volume level is the same as the settings of the handset ringer

volume. If the handset ringer is set to VOLUME OFF, the alarm still sounds at VOLUME 1 level.

when the alarm rings.

(12 HR or

24 HR).

c. During an external call or internal call, if an alarm is set and when the alarm

time is reached, the <ALARM icon> and “ALARM ON” will still flash. An alarm tone will be emitted from the earpiece to alert the user the alarm time is reached. Once the user presses any key or presses and holds

d. During paging or ringing, the alarm will not sound when the alarm time is

reached. However, if the snooze function is enabled and there is no paging

7.2.1 Turn on/off the Alarm

1. Press <MENU> and <UP/DOWN> to select HS SETTINGS.

2. Press <OK> and <UP/DOWN> to select ALARM.

4. Press <OK> to confirm. Note: If ON is selected, you will be asked to set the alarm time.

7.2.2 Set the Alarm Time (If Alarm time is set to be ON)

1. Follow Steps 1 to 4 in Section 7.2.1.

2. Enter the alarm time in 24 hour format.

3. Press <OK> to display "SNOOZE".

4. Press <OK> and <UP/DOWN> to select snooze ON or OFF.

5. Press <OK> to confirm.

7.3 Handset Settings

7.3.1 Set the Ringer Melody for Internal Calls

1. Press <MENU> and <UP/DOWN> to select HS SETTINGS.

2. Press <OK> and <UP/DOWN> to select RING SETUP

3. Press <OK> and <UP/DOWN> to select INT RING.

4. Press <OK> and <UP/DOWN> to select the melody you want to hear for

Note: The respective melody will be played while browsing the ringtone list.

5. Press <OK> to confirm.

3. Press <OK> and <UP/DOWN> to select ON/OFF.

<TALK OFF> to disable

the alarm, the display will revert to the call duration.

or ringing, the alarm will sound again at the end of the snoo .

internal calls.

7.3.2 Set the Ringer Melody for External Calls

1. Press <MENU> and <UP/DOWN> to selectHS SETTINGS.

2. Press <OK> and <UP/DOWN> to select RING SETUP.

3. Press <OK> and <UP/DOWN> to selectEXT RING.

4. Press <OK> and <UP/DOWN> to select melody you want to hear for external

Note: The respective melody will be played while browsing the ringtone list.

5. Press <OK> to confirm.

7.3.3 Set the Ringer Volume

1. Press <MENU> and <UP/DOWN> to selectHS SETTINGS.

2. Press <OK> and <UP/DOWN> to select RING SETUP.

3. Press <OK> and <UP/DOWN> to select RING VOLUME.

4. Press <OK> and <UP/DOWN> to select the desired ringer volume (a total of 6 ringer volume levels including VOLUME OFF).

Note: The respective ringer volume will be played during your selection. If VOLUME OFF is selected, the <Ringer Off> icon will be displayed.

5. Press <OK> to confirm.

7.3.4 Set Alert Tones

Three different alert tones are set on by default, but can be turned off, if desired. Key Tone - a single beep is emitted when you press a key.

you need to charge the handset batteries.

1. Press <MENU> and <UP/DOWN> to selectHS SETTINGS.

2. Press <OK> and <UP/DOWN> to selectTONE SETUP.

3. Press <OK> and <UP/DOWN> to selectKEY TONE / BATTERY TONE /

4. Press <OK> and <UP/DOWN> to turn on or off these tones.

5. Press <OK> to confirm.

Out of Range Tone - emitted while you are talking on the phone to alert you to move loser to the base unit, before the call is lost.

Low Battery Tone - emitted while you are talking on the phone to alert you that

OUT OF RANGE.

7.3.5 Set the Handset Language

1. Press <MENU> and <UP/DOWN> to select HS SETTINGS.

2. Press <OK> and <UP/DOWN> to selectLANGUAGE.

3. Press <OK> and <UP/DOWN> to select the desired language.

4. Press <OK> to confirm.

7.3.6 Rename the Handset

1. Press <MENU> and <UP/DOWN> to select HS SETTINGS

2. Press <OK> and <UP/DOWN> to select RENAME HS.

3. Press <OK> and change the name of your handset, using <C/MUTE> to delete

4. Press <OK> to confirm.

letters and the alphanumeric

keys to enter up to 10 letters for the name.

7.3.7 Choose the Information to be Displayed in Idle You can choose to display the time or handset name in your idle screen.

1. Press <MENU> and <UP/DOWN> to select HS SETTINGS.

2. Press <OK> and <UP/DOWN> to selectHS DISPLAY.

3. Press <OK> and <UP/DOWN> to select HANDSET NAME or TIME.

4. Press <OK> to confirm.

7.3.8 Set the Auto Answer If you turn on the Auto Answer, you can answer a call automatically by just lifting

1. Press <MENU> and <UP/DOWN> to select HS SETTINGS.

2. Press <OK> and <UP/DOWN> to selectAUTO ANSWER.

3. Press <OK> and <UP/DOWN> to turn on or off the auto answer feature.

4. Press <OK> to confirm.

the handset off the base or charger, without having to press any key.

calls.

7.4 Base Settings

7.4.1 De-register a Handset This operation should only be necessary if one of your handsets becomes faulty or lost and needs to be replaced. You will need to enter the 4-digit System PIN (Default PIN is 0000) in order to

Note: You cannot de-register the handset that you are currently using.

1. Press <MENU> and <UP/DOWN> to select BS SETTINGS.

2. Press <OK> and <UP/DOWN> to select DELETE HS.

3. Press <OK> and the display shows "PIN?".

the

antenna icon flashing and "REGISTER" on the display.

de-register a handset from the base station.A de-registered handset will have

4. Enter the 4-digit system PIN.

5. Press <OK> and the first handset number is displayed.

6. Press <UP/DOWN> to scroll through the list of registered handsets and

7. Press <OK> to confirm, and the chosen handset will be de-registered.

select

the number of the handset you want to de-register.

network when you receive an incoming call.

7.4.2 Change the dial mode

1. Press <MENU> and <UP/DOWN> to selectBS SETTINGS

2. Press <OK> and <UP/DOWN> to selectDIAL MODE.

3. Press <OK> and <UP/DOWN> to select TONE or PULSE (The current setting is indicated by an asterisk to the right).

4. Press <OK> to confirm.

You should normally leave the dialling mode at its default setting of TONE (also called DTMF) unless the phone is connected to an old exchange that only

Note: If PULSE dialling is set, you can press the * key to switch to TONE dialling

recognises PULSE dialling.

for the rest of that call.

7.4.3 Change the Flash (Recall) Time

1. Press <MENU> and <UP/DOWN> to selectBS SETTINGS.

2. Press <OK> and <UP/DOWN> to selectFLASH TIME.

3. Press <OK> and <UP/DOWN> to select your desired flash time (SHORT,

4. Press <OK> to confirm.

You may need to change the recall (flash) time if your phone is connected to a PBX. The recall time options are SHORT (the default value of 100ms), MEDIUM ( 0ms) or LONG (600ms).

MEDIUM,

7.4.4 Change the System PIN Code

A 4-digit system PIN code is used for changing the system settings of the base station. It is used to protect your phone against unauthorised use. The default system PIN code is 0000.

1. Press <MENU> and <UP/DOWN> to selectBS SETTINGS.

2. Press <OK> and <UP/DOWN> to select CHANGE PIN.

3. Press <OK> and you are requested to enter the 4-digit system PIN.

4. Enter the old system PIN.

5. Press <OK> and enter the new system PIN.

6. Press <OK> and enter the new system PIN again.

Note: If the new PIN entered in Step 6 is not the same as the new system PIN entered in Step 5, you must enter the new system PIN at step 5 again.

7. Press <OK> to confirm

“WITHHELD”

7.5 Registration

already registered to your base, so you do not need to register them.

You can register additional handsets to have up to five handsets per base unit, with each handset's number (1 to 5) shown on its display. (Note: each handset

1. Press and hold <PAGE> on the base station for more than five seconds, to put the base station into registration mode. (Note: there is no feedback to

It will stay in registration mode for about

To register a new handset to your base:

within this time

2. Press <MENU> and <UP/DOWN> to select REGISTRATION.

3. Press <OK> and you are requested to enter the 4-digit system PIN.

4. Enter the 4-digit system PIN.

5. Press <OK> to confirm, and the display will show SEARCHING.

If the handset registration is successful, you will hear a confirmation tone and the <antenna icon> will stop flashing. This may take a short while. The handset will automatically be allocated the next available handset number. This handset number is shown in the handset display in standby mode. If the handset registration is unsuccessful, the <antenna icon> will still flash and the

7.6 Reset Your Phone

You can reset your phone to the default settings . After a reset, all

your personal

settings, call list entries, redial list entries, and answering machine messages will

1. Press <MENU> and <UP/DOWN> to select

DEFAULT.

2. Press <OK> and you are requested to enter the 4-digit system PIN.

3. Enter the 4-digit system PIN.

4. Press <OK> to display CONFIRM?

5. Press <OK> to confirm, and the phone will be reset to its default settings.

can only be registered to one base.)

1 minute, so the following handset sequence must be completed

unchanged.

DECLARATION OF CONFORMITY

UK (BTP) Ver1,2009

6 CALLER DISPLAY (NETWORK DEPENDENT)

This feature is available if you have subscribed to the Calling Line Identification service with your network service provider. Your phone can store up to 10 received calls with date/time information in the Call List. The number will be shown on the handset display when the phone is ringing. If the number matches with one of the entries in your Private Phonebook, the caller’s name stored in the private phonebook will be displayed alternately with the number, and the handset will ring with the ringtone associated with that phonebook entry.

Problem Causes Solutions

No dialling tone when pressing <TALK ON>

a.The connection cord of the base station is not plugged in. b.The adapter cord is not plugged in correctly in the base station. c. Another handset is using the base to make a call. d. Wrong telephone line cord

a.Check the connections. Unplug and plug back in the mains. Check that the telephone cord has been plugged into the base station and the phone socket. b.Check the base station plug and the 230V plug (remove and plug-in). c.Wait until the line is unoccupied. d.Use the original telephone line

cord supplied When connect to a PBX, no and/or wrong connection after dialling

Dialling prefix is needed. Insert the dialling

"SEARCHING" is displayed.

a. Base station out of range. b. Base station not

connected to mains.

Reduce the range.

Connect base station to

mains.

The call does not work.

Service not activated or wrong operator or wrong setting

Check your Subscription with

network or change the dial mode.

No display. Empty battery Recharge battery

key

Technical Support

If the fault persists...

Disconnect all other instruments connected to the same line as the

Disconnect the base unit from the telephone line and plug a different phone into

the master telephone socket.

Try making a call. If this works, the line is OK. If the cal l does not work, and you are using a two-way socket adapter, remove it and plug a telephone directly into the socket. If the call now works, the adapter may be faulty.

Please contact the technical support of the network provider for further information. This telephone is not equipped with a grounding function

used in PBX systems.

Lifestyle 191

all Call list entries

alarm is sounding, to stop the alarm and turn off the snooze function.

ze period

LONG,

with the current setting indicated by and asterisk to the

right).

IMPORTANT: When you purchase a Lifestyle 1910system, all handsets are

Handset registration is only necessary when you buy extra handsets or if a handset has become faulty.

be deleted but your phonebook remains

, and therefore some of

the functions may be limited when

We the manufacturer / Importer : Binatone Telecom Plc,

1 Apsley Way London, NW2 7HF.

Declare under our sole responsibility that the following product Type of equipment:

Digital cordless telephone Model Name: Country of Origin:

China Brand: complies with the essential protection requirements of R&TTE Directive 1999/5/EC on the approximation of the laws of the Member States relating to Radio Spectrum Matters, the Council Directive / /EC on the approximation of the laws of the Member Statesrelating to electromagnetic compatibility (EMC) and the European Community Directive 2006/95/EC relating to Electrical Safety. Assessment of compliance of the product with the requirements relating to the essential requirements according to Article 3 R&TTE was based on Annex III of the Directive 1999/5/EC and the following standard:

Radio Spectrum: EN 301406: V1.5.1:2003

;

EMC: EN 301489-1:V1.5.1:2005

;

EN 301489-6:V1.2.1;2002;

Electrical Safety: EN 60950-1:2006.

Manufacturer / Importer (signature of authorized person)

200

Date

Signature

Binatone

The conformity to the requirements is validated by the

symbol.

NOTE: In compliance with Directive 2002/96/EC, when you purchase a product that comes with the symbol shown on the right, you are required to dispose of

electrical and electronic equipment by separate waste collection and you cannot dispose of the product as normal waste.

This equipment and all its components, subsystems and consumable materials formed an

integral part of this product and when you decide to dispose

takethem to a local recycling centre for appropriate waste disposal, in compliance with the current regulations. Details about the location of these centres can be obtained from your local authority.

of them you have to

Lifestyle 1910 Series

Notes for battery disposal

Your product contains batteries covered by the European Directive 2006/66/EC, which cannot be disposed of with normal household waste. Please be aware of the local rules on separate collection of batteries. The correct disposal of batteries helps protect

the environment and

10 9Mar



ANSWERING MACHINE

Your phone includes a telephone answering machine that records unanswered calls when it is on.The answering machine can store up to 59 messages within

record memos for other users of your phone. If the answering machine memory is full, the Handset will display TAM FULL alternately with the handsets name or time, depending on the

1. Press <MENU> and <UP/DOWN> to select ANS. MACHINE.

2. Press <OK> and <UP/DOWN> to select TAM ON/OFF.

3. Press <OK> and <UP/DOWN> to select

ON or OFF.

4. Press <OK> to confirm. ¾ If answering machine is set to ON, <TAM ON icon> displays on the handset

LCD.

¾ If answering machine is set to OFF, <TAM ON icon> will not display on the

handset LCD.

.2 Listen to the Messages in the Answering Machine

When new messages are recorded on the answering machine, the <TAM icon>

flashes on the handset display until all the new messages are played. After a new message is played it will be saved as an old message automatically unless it is deleted. Old messages will be played after all new messages are played completely.

1. Press the TAM Control key <PLAY / STOP> to start the message

playback and the screen displays the date and time information of the

Note: A <STAR icon> is placed at the centre of the bottom of the handset display to indicate that it is a new message. When a message has been played, the <STAR icon> will disappear and will

You can turn the answering machine on or off using the handset.

When the answering machine is set to ON, calls will be answered after the set answer delay and the caller can then leave you a message. When the answering machine is set to OFF, calls will be answered after about

handset standby display mode set (see section 7.3.7), and you will have to

the maximum recording time of up to 15 minutes, depending on which

As well as recording

8.1 Turn On/Off the Answering Machine

WN> to increase or decrease

the message playback volume respectively.

Alternatively, press <MENU> and <UP/DOWN> to select STOP, FORWARD,

DELETE to perform the functions

Note: Alternatively, you can use the following shortcut keys to control different

Press <Key 5> to stop message playback. Press <Key 4> once to skip to repeat playing the current message from the

Press <Key 6> to skip to play next message. Press <Key 2> to delete the current message playback.

beginning.Press twice to skip backward to play the previous message.

operations during message playback.

1. Press <MENU> and <UP/DOWN> to select ANS. MACHINE.

2. Press <OK> and <UP/DOWN> to select DELETE ALL.

3. Press <OK> to display CONFIRM?

4. Press <OK> to delete all old messages. Note: If there are no more messages in the answering machine, "EMPTY "will display and

return back to ANS. MACHINE menu.

You can record your memo message for another user. When you record a memo, the message can be played back messages. Memo recording can still

function even when the answering machine

1. Press <MENU> and <UP/DOWN> to select ANS. MACHINE.

2. Press <OK> and <UP/DOWN> to select MEMO.

3. Press <OK> to start memo recording and “RECORDING ” is displayed.

4. Press <OK> to stop memo recording and save the memo. OR

4. Press <C> to stop memo recording without saving and return back to

ANS. MACHINE

menu.

You can use the TAM SETTINGS menu through the handset to change the settings of your answering machine.

By default, the answer machine is set in ANS & REC mode which allows callers to leave a message. This mode can be changed to ANSWER ONLY which does not allow callers to leave a message. In that case, your callers will be

1. Press <MENU> and <UP/DOWN> to select ANS. MACHINE.

2. Press <OK> and <UP/DOWN> to select TAM SETTINGS.

3. Press <OK> and <UP/DOWN> to select ANSWER MODE.

4. Press <OK> and <UP/DOWN> to select ANS & REC or ANSWER ONLY

5. Press <OK> to confirm.

The answering machine announces the outgoing message when it answers a call. There is a pre-set OGM for each of mode or ANSWER ONLY

on this model.

prompted to call back later.

You can record your own OGM for ANS & REC mode and ANSWER ONLY mode. When you record your own OGM, it will be used when the answering machine answers the call. If your personalised OGM is deleted, the pre-set OGM will be

1. Press <MENU> and <UP/DOWN> to select ANS. MACHINE.

2. Press <OK> and <UP/DOWN> to select TAM SETTINGS.

3. Press <OK> and <UP/DOWN> to select OGM SETTINGS.

4. Press <OK> and <UP/DOWN> to select ANS & REC or ANSWER ONLY.

5. Press <OK> and <UP/DOWN> to select RECORD MESS.

restored automatically.

1. Press <MENU> and <UP/DOWN> to select ANS. MACHINE.

2. Press <OK> and <UP/DOWN> to select TAM SETTINGS.

3. Press <OK> and <UP/DOWN> to select TAM LANGUAGE.

4. Press <OK> and <UP/DOWN> to select your desired OGM language.

5. Press <OK> to confirm.

6. Press <OK> to start recording your personalised OGM and “RECORDING”

7. Press <OK> to stop and save your personalised OGM. Your newly saved OGM will playback automatically. Alternatively, press <BACK> to return to previous screen without saving the

is displayed on the screen.

personalised OGM.

2. Press <OK> and <UP/DOWN> to select TAM SETTINGS.

3. Press <OK> and <UP/DOWN> to select RECORD TIME (Available options:

60S, 120S, 180S, or UNLIMITED)

4. Press <OK> and <UP/DOWN> to select your desired recording time.

5. Press <OK> to confirm.

Your phone lets you check your messages, or otherwise operate your answering machine, by calling the answering machine when you are away from home

remote access PIN code is used to prevent other people from

unauthorised

When the answering machine is on and takes a call, you can listen to the caller leaving a message. You can then identify the caller and decide whether to take

If the answering machine is set to ON, when there is an incoming message, the handset will display “SCREENING?”

1. Press <OK> to start call screening. Any handset can You can listen to who is leaving the message and decide whether to pick up

2. The handset will display “SCREENING”.

3. You can adjust the speaker volume by pressing <UP or DOWN>.

3. Press <Back> to return to previous screen and you cannot hear the recording. At any time if you want to pick up the call, you can press <TALK ON> and the message recording will be stopped automatically. If the answering

in the process of recording, the message already stored will be

the call in person.

machine is

saved.

the call or not.

listen.

1. Press <MENU> and <UP/DOWN> to select ANS. MACHINE.

2. Press <OK> and <UP/DOWN> to select TAM SETTINGS.

3. Press <OK> and <UP/DOWN> to select CHANGE PIN.

4. Press <OK> and enter the Old PIN. (Default Remote Access PIN is 0000).

5. Press <OK> and enter the New PIN.

6. Press <OK> and enter the New PIN again. Note: If the new PIN entered in Step 6 is not the same as the new system PIN entered in Step 5, you must enter the new system PIN at step 5 again.

7. Press <OK> to reconfirm.

4. Press <OK> and <UP/DOWN> to select ON or OFF to turn the remote access

5. Press <OK> to confirm. .5.9.3 Access Your Answering Machine Remotely

You can ring your phone from another tone-dialing phone to switch the answering machine on or off, and/or listen to your messages remotely.

1. Place a call from a tone-dialing phone to your phone.

2. When the answering machine answers the call and starts playing the OGM,

Note: The * must be entered while the OGM is still playing, and the 4-digit PIN

3. Enter the 4-digit Remote Access PIN (default PIN is 0000).

Note: If the 4-digit Remote Access PIN is entered incorrectly three times consecutively, the line will be released automatically.

4. Press the following keys to carry out your desired function.

on or off respectively.

press <KEY *>.

should be follow without any delays.

)XQFWLRQV

.H\V

:KLOHPHVVDJHLVQRWSOD\LQJ :KLOHPHVVDJHLVSOD\LQJ

 'HOHWHWKHFXUUHQWPHVVDJHSOD\ing 

5HSHDWSOD\LQJWKHFXUUHQWPHVVDJH IURPWKHEHJLQQLQJ3UHVVWZLFHWRVNLS

EDFNZDUGWRSOD\WKHSUHYLRXVPHVVDJH  3OD\WKHPHVVDJH 6WRSWKHFXUUHQWPHVVDJHSOD\EDFN  6NLSWRSOD\WKHQH[WPHVVDJH 

7XUQRQWKHDQVZHULQJPDFKLQH



6WRSWKHFXUUHQWPHVVDJHSOD\EDFN 

7XUQRIIWKHDQVZHULQJPDFKLQH

Note: If your answering machine is switched off, the phone will enter into the remote access mode after 10 rings. You can then enter the <KEY *> and the 4-digit remote a

cce

ss PIN (Default

Remote Access PIN is 0000) to activate the remote access feature.

1. Press <MENU> and <UP/DOWN> to select ANS. MACHINE.

2. Press <OK> and <UP/DOWN> to select TAM SETTINGS.

3. Press <OK> and <UP/DOWN> to select REMOTE ACC.

When your answering machine memory is full and the answer mode is in ANS &

change

to ANS & RECORD

mode automatically after some messages have

RECORD, the answer mode will change to ANSWER ONLY automatically. It will

been deleted.

Call Screening

9 TROUBLESHOOTING

8.3 Delete All Messages in the Answering Machine

8.4 Record Memo

8.5 Answering Machine Settings

8.5.1 Set the Answer Mode

8.5.2 Set the Outgoing Message (OGM) Language.

8.5.3 Record Your Own Outgoing Message (OGM)

8.5.7

8.5.9 Activate Remote Access

8.5.9.1 Change the 4-Digit Remote Access PIN

8.5.9.2 Activate or Deactivate the Remote Access

5.4 Edit a Phonebook Entry

In idle:

1. Press <MENU> then <UP/DOWN> to select PHONEBOOK and then press

2. Press <UP/DOWN> to select the desired phonebook entry.

3. Press <MENU> and <UP/DOWN> to select EDIT.

4. Press <OK> to display the current name.

5. Edit the name and press <OK>.

6. Edit the number and press <OK>.

7. Press <UP/DOWN> to select the ringtone and press <OK> to confirm.

5.5 Delete a Phonebook Entry

In idle:

1. Press <MENU> then <UP/DOWN> to select PHONEBOOK and then press

2. Press <UP/DOWN> to select the desired phonebook entry.

3. Press <MENU> and <UP/DOWN> to select DELETE

4. Press <OK> to confirm, and the entry will be deleted.

5.6 Delete

1. Press <MENU> then <UP/DOWN> to select PHONEBOOK and then press

Press <MENU> and <UP/DOWN> to select DELETE ALL.

Press <OK> to display <CONFIRM?>. Press <OK> to confirm. All entries will be deleted and the display will show <EMPTY>.

5.7 Check the Phonebook Usage

You can check how many phonebook entries are stored in your handset and how many phonebook entries are available for you to store in the phonebook.

1. Press <MENU> then <UP/DOWN> to select PHONEBOOK and then press

2. Press <MENU> and <UP/DOWN> to select PB STATUS.

3. Press <OK> to display how much of the phonebook is being used, for example < 6/ 20 USED> means 6 entries are stored out of the total available spaces.

all Phonebook entries

Functions

Keys

While message is playing

Delete the current message playing.

Repeat playing the current message

Play the message

Stop the current message playback

Skip to play the next message

Stop the current message playback

Turn off the answering machine

from the beginning. Press twice to

skip backward to play the previous

message.

Turn on the answering machine

While message is not playing

delete some messages before any new ones can be recorded

ANS & REC

or French (Francais)

access of your answering machine.

from a tone-dialling phone. and then dialling a 4-digit remote access PIN

The 4-digit

prevent health

hazards

2004108

Answering Machine

The unit does not record new messages.

The answering machine is turned off.

Turn on the answering machine.

The caller cannot leave a message.

a. The answering machine

is turned off.

b. Message memory is full.

a. Turn on the answering machine. b. Erase unnecessary messages.

I cannot operate the answering machine remotely.

a. You are entering the

wrong remote access code b. You are pressing the dial keys too quickly. c.

You are using a pulse

telephone.

a. If you forget the remote maccess

code, reset to the default settings. b. Press each key firmly. c.

Try again using a touch tone phone

While recording an outgoing message or listening to messages, the unit rings and recording stops.

A call is being received.

Answer the incoming call and try again to record your out going message later.

OGM during playback and record a new one whenever you want. Please note that pre-set OGM cannot be deleted.

You can playback your own personalised OGM or the pre-set OGM for ANS & REC mode or ANSWER ONLY mode and choose to delete your personalised

1. Press <MENU> and <UP/DOWN> to select ANS. MACHINE.

2. Press <OK> and <UP/DOWN> to select TAM SETTINGS.

3. Press <OK> and <UP/DOWN> to select OGM SETTINGS.

4. Press <OK> and <UP/DOWN> to select ANS & REC or ANSWER ONLY.

5. Press <OK> and <UP/DOWN> to select PLAYBACK.

6. Press <OK> to playback your current OGM and is displayed on the screen.

7. Press <OK> to stop the OGM playback and return to the previous menu.

Note: If a personalised OGM has not been recorded, the pre-set OGM will be played.

8.5.4.2 Delete the Personalised OGM

1. Repeat Steps 1 to 6 in Section 8.5.4.1

2. Press <C> while the OGM is playing to delete your personalised OGM and return to the previous menu and the pre-set OGM is restored automatically.

Note: If the pre-set OGM is playing, you are not allowed to delete it, so pressing <C> will just stop the playback and return to the previous menu.

You can set the number of rings before the answering machine answers and starts playing your OGM. You can set the answering machine to answer after two to eight rings or TIME SAVER.If Time Saver is set the answering machine

1. Press <MENU> and <UP/DOWN> to select ANS. MACHINE.

2. Press <OK> and <UP/DOWN> to select TAM SETTINGS.

3. Press <OK> and <UP/DOWN> to select ANSWER DELAY (Available options:

2 RINGS, 4 RINGS, 6 RINGS, 8 RINGS or TIME SAVER)

4. Press <OK> and <UP/DOWN> to select your desired answer delay.

5. Press <OK> to confirm.

will answer after 4

rings if there are no new messages, or after 2 rings if there is a new message, so if you call in and you don't get an answer after 2 or 3 rings, you can hang up and save on call charges

"PLAYING OGM"

You can set the maximum length of the recording time of the incoming messages.

1. Press <MENU> and <UP/DOWN> to select ANS. MACHINE

8.5.4 Playback and Delete the Outgoing Message (OGM)

8.5.4.1 Playback the OGM

8.5.5 Set the Answer Delay

8.5.6 Set the Recording Time of Incoming Message

c. ANSWER ONLY mode is set.

. Change to ANS & REC mode. c

0 system and try to make a call.

Note: Alternatively press <MENU>, <UP/DOWN> to ANS. MACHINE, <OK> to MSG PLAYBACK, and <OK> to start the message playback.

not be shown when you listen to this message again.

mode, which can only be in English

<OK> to access the phonebook.

display will return to "REGISTER", so you will need to repeat the registration

process.

know it is in registration mode.)

message being played.

2. During message playback, press <UP> or <DO

When the alarm time is reached, the

DETAILS

in the same way as answering machine

is turned off.

In idle mode, press and hold the TAM Control key <DELETE>. All old messages

<PLAY/STOP> to stop the playback <SKIP BACKWARD> to repeat the current message from the start

<SKIP BACKWARD> twice to play the previous message <SKIP FORWARD> to play the next message <DELETE> to delete the current message and play the next message.

PREVIOUS,

will be deleted and the display will briefly show EMPTY. New messages will not be deleted.

Note: If there are no messages, the handset display will briefly show

then return to MSG PLAYBACK.

"00-00 00-00"

During playback, press the TAM Control keys for the following functions:

Note: Alternatively,

prefix

14 rings and the answer only message will be played to your callers. They will

not be able to leave you a message.

All received calls are saved in the Call List,

with the latest When the call list is full, the oldest call will be replaced by a new call. Any unanswered calls which have not been viewed are marked with a <*> icon at the centre of the bottom line of the display.

call at the top of the list.

The purchase shown on your sales receipt. This guarantee

does not cover any faults or defects caused by accidents,misuse, fair wear and tear, neglect, faults on the telephone line, lightning, tampering with the equipment, or any

attempt at adjustment or repair other than through approved agents.

Please keep your sales (till) receipt this is your guarantee.

You should also keep the original packaging material. In the unlikely event that you need to return your

1. Disconnect the base unit from the telephone line and the mains electricity

supply.

2. Pack up all parts of your Lifestyle

3. Return the unit to the shop where you bought it, making sure you take your

sales receipt. Remember to include the mains adapter.

3. Call Helpline on 0845 345 9677 (for UK only) and ask for a quotation of the repair charge and details of where to send your

for repair.

4. Make sure you include with your

5. Return your

If the unit is no longer under Guarantee, first follow steps 1 and 2 as for repair under Guarantee. Then...

¾ Your name and address ¾ A cheque or postal order for the value of the repair

* This does not affect your statutory rights.

Department.

packaging.

Lifestyle

Lifestyle 1910

Lifestyle

GUARANTEE AND SERVICE

1910 system is guaranteed for 12 months from the date of

1910 system

to our Repair Centre while it is under guarantee, there may be handling charge.

1910 system , using the original

system

1910 system to the address given by the Service

1910 system.

11.1 While the unit is under Guarantee

11.2 After the Guarantee has expired

Three different compression rates (HIGH, MEDIUM and LOW) are provided for

rate, the higher the recording quality level attained, but the

1. Press <MENU> and <UP/DOWN> to select ANS. MACHINE.

2. Press <OK> and <UP/DOWN> to select TAM SETTINGS.

3. Press <OK> and <UP/DOWN> to select COMPRESSION.

4. Press <OK> and <UP/DOWN> to select your desired compression rate.

5. Press <OK> to confirm.

you to select different quality levels of recording incoming messages. The lower the compression

8.5.8 Change the Compression Rate

shorter the total recording time available. ( LOW=7 minutes, MEDIUM=10 minutes, HIGH=15 minutes approx).

compression rate is selected.

incoming messages,you can

¾ A brief description of the fault