Binatone IHOME PHONE User Manual

iHome Phone – Quick Start Guide

For a full explanation of all features and instructions, please refer to the User's Guide.

1 Setting up your iHome Phone

A. Attach the stand to DECT base station

1. Insert the stand into the locking grooves at bottom of the DECT
base station.

2. Twist the stand slightly until the stand is firmly secured to the
DECT base station.

B. Connect the power cable and telephone line cord

1. Plug the power cable and telephone line cord to the power jack
and phone jack at the bottom of the DECT base station.

2. Plug the other end into a power and telephone wall socket.

1

C. Removing back cover

D. Installing the battery

1. Use the Stylus pen to gently press the keyhole to release the
spring lock.

2. The back cover will disengage from the handset.

3. Remove the back cover completely.

1. Place the supplied rechargeable battery into the battery
compartment of the handset.

2. Install the back cover by aligning the back cover tabs with the
notches located at the top of the back panel.

3. Push down the back cover until it clicks in place.

E. Insert memory card

Insert the memory card by pushing the card firmly into the slot with
the metal contacts facing up, and in the direction as indicated above.

2