ENGLISH.........................................4
РУССКИЙ .....................................10
ENGLISHРУССКИЙ
УКРАЇНСЬКА ............................... 14
3
УКРАЇНСЬКА
HAS-1020 Hair styler-dryer
Please read the safety instructions carefully before using this
appliance. Please retain the instructions for future refer
ence.
DESCRIPTION
OF THE APPLIANCE
1. Housing
2. Hair dryer working mode switch
0ff – the appliance is switched off;
Low –warm airflow for light curling and gentle hair
drying;
High –hot airflow for strong and intensive hair curl-
ing and drying;
Cool – cold airflow to fix the styling.
3. Attachment release button
4. Small diameter round styling brush (25mm)
5. Mid-size thermal brush (32 mm)
6. Rotating power cord with hanging loop
BEFORE USING
THE APPLIANCE
Remove all wrappings from the appliance .
OPERATING INSTRUCTIONS
1. Insert the appropriate detachable dryer attachment (4,5) into the housing (1) until a click
is heard. Make sure the attachment is firmly fixed.
2. Select the desired dryer work mode by setting the work mode switch (2) into the appropriate position (Low, High or Cool).
4. For convenient use of the dryer the power cord (6) can be
rotated 360°, which prevents it from getting twisted.
5. In order to remove the attachments from the housing (1), push
the button (3) and pull the attachment and the housing (1) in
opposite directions.
Small diameter round styling brush (4) helps you
to add volume to the hair and curling at hair ends. Switch the
appliance on and one by one comb damp hair strands from their
roots to the very ends while slightly curling them.
Mid-size thermal brush (5) helps you to create
3. Start drying and styling your hair.
Use of attachments
4
loose waves in medium length hair. Put a damp thin strand of hair
on the brush (5) and dry it using the High setting. Then switch on
the cold airflow mode (Cool) for several seconds to fix the style.
Carefully release the strand. Similarly curl the rest of the hair.
Also with the help of the thermal brush (5) you can easily
straighten the hair or curl the ends: styling is made quickly and
easy because of the heat in the metal working area of the thermal
brush (5) and is assisted by the hot air.
CARE AND CLEANING
1. Always unplug the appliance and let cool it
down prior to cleaning.
2. Clean the dryer housing with a soft damp
cloth. Prevent water or other liquids from getting inside the appliance.
3. After each use of the dryer remove any hairs
from the attachments and then wash them with
warm soapy water, if necessary.
4. Assemble the dryer only when all components are dry.
USEFUL TIPS
Hair care
To keep your hair healthy, we recommend
you to make and use weekly, the following nutri
tional mask: mix two eggs and 2 tablespoons of
burdock oil and apply to dry hair from the roots to
the ends. Wrap the hair with a towel, wait for 30 minutes and
then thoroughly shampoo the hair (repeat twice, if neces
sary).
Use the following mixture as a hair rinse to make the hair shine:
mix strong infusion of medicinal herbs with the yolk of an egg,
if your hair is dry, or with the white of an egg if you have
normal or oily hair (chamomile is great for light hair, sage – for
dark hair). Apply the mixture to the hair and thoroughly mas
sage the head; then thoroughly wash the hair. This recipe has
a double therapeutic action: the mixture stimulates the growth
of the hair, which then becomes glossy and manageable.
ENGLISH
SAFETY MEASURES
When using your appliance, the following ba
sic safety precautions should always be followed:
Before using for the first time, check that the
appliance voltage is the same as your local supply.
Only use the appliance for the purposes stipu
lated by the instructions.
ment.
To avoid electric shocks, do not immerse the appliance,
Only use attachments supplied with the equip
5
plug or power cord in water or any other liquids. Do
not place the appliance where it could come into contact with
water or other liquids. If the appliance comes in contact with
water, immediately disconnect it from the mains. Do not use
the machine again until it has been serviced by an autho
rized service center.
Do not let children use the appliance without supervision.
If the plug of the appliance’s power cord does not fit
your wall outlet, contact an authorized service cen
ter.
Use of various adapters may result in damage to the
appliance and termination of warranty.
Always supervise the equipment while in use.
To avoid a circuit overload, do not operate any other high
voltage equipment on the same circuit.
Always unplug the appliance after use, before mov
ing and before cleaning it.
Never pull the cord to disconnect the appliance, instead grasp
the plug and pull it to disconnect.
Do not allow the cord or the machine itself to come in contact
with hot surfaces.
Position the equipment and the cord so that nobody can acci
dentally overturn the equipment.
Do not use the appliance if it has been dropped, or it has a
damaged power cord or plug. Do not modify or repair the
machine yourself.
Do not dismantle the appliance as improper assembly might
result in an electric shock during the subsequent use of the
equipment. Repairs should only be done by authorized
service centers.
Do not use the appliance where the air may contain volatile
flammable substances.
This equipment is intended for household use only, not for
commercial or industrial use.
Please follow all the requirements of this guide.
Do not use the appliance if it has mechanical defects (dents,
cracks etc.), get it checked by the nearest authorized service
center.
SPECIAL SAFETY MEASURES
Care should be taken to prevent foreign objects from entering the appliance as they may cause
motor failure and premature breakdown of the appliance as well as electric shock.
Never cover the appliance during use. When
using the hairdryer, make sure the air filter is clean
Switch the appliance off when not in use even if it is for a short
period of time.
Do not use the appliance near a bathtub, washbasin, pool or
other sources of water.
Avoid direct contact between attachments and your skin.
For extra safety we recommend the installation of a residual
and not blocked.
6