Bimba-Mead MTCM-32X80-S-T User Manual

Download

Extruded Thrusters

Brochure

MFD Extruded Thrusters

Chrome plated stainless steel guide shafts optimize bearing performance

Bronze bushing for heavy loads, or ball bushings for tighter precision and high speeds

Mounting exibility:

• Through & C-bore

• Tapped bottom

• Tapped rear

• Bottom T-slots

Dowel holes on all mounting surfaces

Anodized aluminum cylinder body

Steel tooling plate

The same superior value you have come to expect in MFD Air Preparation and Valve products is now available in an actuator series. The MTCM/MTCL Extruded Thrusters are compact, rugged actuators, designed to give you a long-lasting, cost-effective solution in space-constrained applications. Highlights of the offering include:

• Clean, compact extruded Aluminum body for maximum mounting efciency

• Available with bronze bearings (heavy side-loading) or ball bushings (precision, high-speed)

• Magnetic piston for position-sensing included on all models

• Multiple port locations included for plumbing exibility

• Eight bore sizes (12mm, 16mm, 20mm, 25mm, 32mm, 40mm, 50mm, 63mm) available in strokes

up to 250mm

• Interchangeable with popular international brands

• Supported by 5,000+ unit inventory in Chicago, IL

Tracks for ush-mounted position sensors

Top and side porting included standard

MFD Extruded Thrusters

The MFD Extruded Thruster is a rugged, guided actuator with a cylinder integral to the thruster block. The sleek body incorporates switch mounting, for a clean, space-efficient package.

How to Order

MODEL

MTC – Extruded Thruster

MTC M - 50 X 50 - S - T

Item 22 for Bore Size

≥

50mm

NO. Item Material NO. Item Material

1. Tooling Plate Free-machining steel 12. O-ring NBR

2. Guide Shaft

3. Body

4. Retaining Ring Spring steel 16. Piston Brass; Ni Plated

5. Rod Guide Brass; Ni Plated 17. Magnet seat Brass; Ni Plated

6. Bumper Urethane 18. Magnet washer NBR

7. Rod Seal NBR 19. Magnet

8. Screw Stainless steel 20. Screw

9. O-ring NBR 21. Screw

10. Bearing (see diagram) 22. Bearing

11. Retaining Ring Spring steel 23. Spacer Aluminum alloy

SAE440/SUS440C

Steel; Chrome Plated

Aluminum; 6463-T5;

Anodized

13. O-ring NBR

14. Rear Cap Brass; Ni Plated

15. Piston rod

Type Bore Size Stroke

MTCL

MTCM

12 ~ 63 12 ~ 63

>100mm >100mm

Carbon steel;

Chrome plated

Sintered Metal

(Neodymium) Carbon Steel;

Zinc Plated

Carbon Steel;

Zinc Plated

Bronze (50mm and

63mm only)

BUSHING TYPE

M – Bronze Bushing L - Linear Ball Bushing

BORE (mm)

STROKE (mm)

10 X X

20 X X X X

25 X X X X X X X X

30 X X X X X X X X

40 X X X X X X X X

50 X X X X X X X X

60 X X X X X X X X

70 X X X X X X X X

75 X X X X X X X X

80 X X X X X X X X

90 X X X X X X X X

100 X X X X X X X X

125 X X X X X X X X

150 X X X X X X X X

175 X X X X X X X

200 X X X X X X X

225 X X X X X X

250 X X X X X X

Engineering Specifications

Bore size (mm)

Action Double acting Fluid Air (Clean/Dry) Temperature Range 23 to 158 degrees F (-5 to 70°C) Pressure Range 18-142 psi (1.2-10 bar) Proof Pressure 213 psi (15 bar) Lubrication Not required Cushion Type Bumper Non-rotate

tolerance

Port Size M5 x 0.8 1/8-NPT 1/4-NPT

Linear Bushing ± 0.08° ± 0.07° ± 0.06° ± 0.05° Brass bushing ± 0.10° ± 0.09° ± 0.08° ± 0.06°

MAGNET

S - With Magnet

THREADS

T - NPT Ports

12 16 20 25 32 40 50 63

Type Bore Size Stroke

MTCL

12 ~ 16 20 ~ 63

MTCM 12 ~ 63

30<Stroke≤100mm 50<Stroke≤100mm 50<Stroke≤100mm

Type Bore Size Stroke

MTCL

MTCM

12 ~ 16 20 ~ 63 12 ~ 63

≤30mm ≤50mm ≤50mm

MFD Extruded Thrusters

Maximum Recommended Loads

N x 0.225 = LBS Nm x 0.113 = IN-LBS

Bore

Type

Size

MTCM 44 33 29 26 41 36 30 28 26 25 24 22 19 17 - - - -

MTCL 37 27 25 22 35 30 27 24 23 21 19 18 15 12 - - - -

MTCM 67 51 42 37 63 58 49 41 37 35 33 32 27 24 22 20 - -

MTCL 54 40 37 32 54 47 42 38 35 32 30 28 23 20 17 15 - -

MTCM - 78 61 57 123 112 99 91 87 84 79 75 66 59 54 49 45 42

MTCL - 58 52 48 101 90 83 74 70 69 63 58 62 54 48 43 39 35

MTCM - 93 89 76 142 131 119 107 101 97 90 85 88 79 71 65 61 55

MTCL - 82 79 68 132 118 109 99 93 88 81 77 80 70 62 55 50 45

MTCM - - 203 190 179 164 221 197 182 172 163 157 142 127 116 106 98 91

MTCL - - 191 182 166 157 207 178 164 156 150 144 203 186 171 158 146 137

MTCM - - 203 190 179 164 221 197 182 172 163 159 142 127 116 106 97 91

MTCL - - 190 182 166 157 210 179 163 156 150 144 203 185 171 158 146 137

MTCM - - 296 283 268 245 303 288 273 266 253 241 216 195 179 164 155 142

MTCL - - 208 196 185 173 259 232 223 212 207 199 264 242 224 207 195 181

MTCM - - 296 283 268 245 303 288 273 266 253 241 216 195 179 164 153 142

MTCL - - 206 196 180 171 259 232 221 212 205 196 262 240 221 205 191 178

Bore

Size

MTCM 0.90 0.79 0.71 0.65 0.77 0.72 0.65 0.53 0.50 0.47 0.41 0.36 0.31 0.27 - - - -

MTCL 0.61 0.45 0.40 0.35 0.58 0.50 0.44 0.39 0.37 0.35 0.32 0.29 0.24 0.20 - - - -

MTCM 1.21 1.04 0.94 .088 1.23 1.11 0.99 0.72 0.69 0.65 0.61 .058 0.50 0.44 0.40 0.36 - -

MTCL 0.99 0.74 0.66 0.59 0.99 0.86 0.77 0.69 0.65 0.61 0.57 0.52 0.43 0.37 0.32 0.28 - -

MTCM - 1.57 1.42 1.31 2.39 2.15 1.97 1.90 1.88 1.86 1.72 1.63 1.44 1.28 1.16 1.06 1.01 0.90

MTCL - 1.26 1.14 1.03 2.17 1.94 1.79 1.59 1.52 1.46 1.33 1.25 1.34 1.17 1.03 0.93 0.88 0.76

MTCM - 2.40 2.22 2.01 3.66 3.35 3.17 3.06 2.96 2.91 2.77 2.57 2.26 2.02 1.83 1.67 1.57 1.42

MTCL - 2.11 1.96 1.75 3.37 3.02 2.71 2.42 2.38 2.33 2.19 1.97 2.05 1.78 1.58 1.41 1.22 1.16

MTCM - - 6.35 6.00 5.73 5.13 5.98 5.74 5.69 5.62 5.11 4.97 4.42 3.98 3.61 3.31 2.97 2.84

MTCL - - 5.95 5.73 5.44 4.89 5.43 5.15 5.11 5.02 4.70 4.51 6.34 5.79 5.33 4.93 4.33 4.29

MTCM - - 7.00 6.60 6.11 5.66 6.66 6.31 6.27 6.23 5.86 5.48 4.87 4.38 3.98 3.65 3.34 3.13

MTCL - - 6.55 6.21 5.77 5.39 6.17 5.67 5.62 5.58 5.33 4.96 6.98 6.38 5.87 5.43 5.00 4.72

MTCM - - 13.0 12.6 11.0 10.8 13.7 12.7 12.0 11.6 11.1 10.6 9.50 8.60 7.86 7.24 6.80 6.24

MTCL - - 9.17 8.75 8.30 7.62 10.3 9.94 9.83 9.77 8.82 8.74 11.6 10.7 9.83 9.12 8.95 7.95

MTCM - - 14.7 13.6 12.9 12.1 19.4 16.2 13.5 12.7 12.1 11.9 10.7 9.69 8.86 8.16 7.52 7.04

MTCL - - 10.2 9.74 9.20 8.48 17.5 14.0 11.0 10.6 10.2 9.74 13.0 11.9 11.0 10.2 9.63 8.84

10 20 25 30 40 50 60 70 75 80 90 100 125 150 175 200 225 250

Type

10 20 25 30 40 50 60 70 75 80 90 100 125 150 175 200 225 250

Maximum Side Load (N)

Stroke (mm)

Maximum Torque (N-m)

Stroke (mm)

MFD Extruded Thrusters

NN N

Dimensions - MTCM/MTCL

P THRU T x TL DEEP

4 PLACES

PA x L1 DEEP

MM x ML DEEP

4 PLACES

Item

Bore Size

Stroke ≤ 30 31-100 101-200 > 200 ≤ 50 51-100 101-200 >200 ≤ 30 31-100 101-200 > 200 ≤ 50 51-100 101-200 >200 ≤ 30 31-100 101-200 > 200 ≤ 30 31-100 101-200 > 200

12 42 55 85 - 42 55 85 - -4 13 43 - 0 13 43 - 20 40 110 - 15 25 60 -

16 46 65 95 - 46 65 95 - -3 19 49 - 0 19 49 - 24 44 110 - 17 27 60 -

20 53 80 104 122 53 80 104 122 -2 27 51 69 0 27 51 69 24 44 120 200 29 39 77 117

25 53.5 82 104.5 122 53.5 82 104.5 122 -1.5 28.5 51 68.5 0 28.5 51 68.5 24 44 120 200 29 39 77 117

Item A E

Bore Size

Stroke ≤ 50 51-100 101-200 > 200 ≤ 50 51-100 101-200 > 200 ≤ 50 51-100 101-200 > 200 ≤ 50 51-100 101-200 >200 ≤ 40 41-100 101-200 > 200 ≤ 40 41-100 101-200 > 200

32 65 102 118 140 65 102 118 140 5.5 42.5 58.5 80.5 5.5 42.5 58.5 80.5 24 48 124 200 33 45 83 121

40 66 102 118 140 66 102 118 140 -1 36 52 74 0 36 52 74 24 48 124 200 34 46 84 122

50 76 118 134 161 76 118 134 161 4 46 62 89 4 46 62 89 24 48 124 200 36 48 86 124

63 77 118 134 161 77 118 134 161 -1 41 57 84 0 41 57 84 28 52 128 200 38 50 88 124

MTCL MTCM MTCL MTCM

A E

M x LL DEEP

4 PLACES

GD+STROKE

N NN

C+STROKE

B+STROKE

A+STROKE

E GE

PA x L1 DEEP

Bore Size\Item B C D (MTCL) D (MTCM) FA FB GA GB GC GD GE H J LL L1 L2 M ML MM N P PA PP

12 42 29 6 8 8 13 7.5 11 8 13 11 58 18 10 6 3 M5 x 0.8 10 M4 x 0.7 5 4.3 3 3.5 16 46 33 8 10 8 13 8 11 10 15 11 64 19 10 6 3 M5 x 0.8 12 M5 x 0.8 5 4.3 3 3.5 20 53 37 10 12 10 16 9 10.5 10.5 12.5 10.5 83 25 12 6 3 M6 x 1.0 13 M5 x 0.8 17 5.6 3 3.5 25 53.5 37.5 12 16 10 16 9 11.5 13.5 12.5 11.5 93 28.5 12 6 3 M6 x 1.0 15 M6 x 1.0 17 5.6 4 4.5 32 59.5 37.5 16 20 12 22 9 12.5 15 7 12.5 112 34 16 6 3 M8 x 1.25 20 M8 x 1.25 21 6.6 4 4.5 40 66 44 16 20 12 22 10 14 18 13 14 120 38 16 6 3 M8 x 1.25 20 M8 x 1.25 22 6.6 4 4.5 50 72 44 20 20 16 28 11 12 21.5 9 14 148 47 20 8 4 M10 x 1.5 22 M10 x 1.5 24 8.6 5 6 63 77 49 20 20 16 28 13.5 16.5 28 14 16.5 162 55 20 8 4 M10 x 1.5 22 M10 x 1.5 24 8.6 5 6

Bore Size\Item P1 Q QL R RR T TL V VA VB VC VD VE W WA WB WL WW

12 M5 x 0.8 14 48 23 41 8 4.5 37 7.4 4.4 3.7 2 6.2 26 50 18 56 22 16 M5 x 0.8 16 54 24 46 8 4.5 38 7.4 4.4 3.7 2.5 6.7 30 56 22 62 25 20 1/8" NPT 18 70 28 54 9.5 5.5 44 8.4 5.4 4.5 2.8 7.8 36 72 24 81 30 25 1/8" NPT 26 78 34 64 9.5 5.5 50 8.4 5.4 4.5 3 8.2 42 82 30 91 38 32 1/8" NPT 30 96 42 78 11 7.5 63 10.5 6.5 5.5 3.5 9.5 48 98 34 110 44 40 1/8" NPT 30 104 50 86 11 7.5 72 10.5 6.5 5.5 4 11 54 106 40 118 44 50 1/4" NPT 40 130 66 110 14 9 92 13.5 8.5 7.5 4.5 13.5 64 130 46 146 60 63 1/4" NPT 50 130 80 124 14 9 110 17.8 11 10 7 18.5 78 142 58 158 70

2 PLACES

4 PLACES

VB VD

DETAIL A

MM x ML DEEP

4 PLACES

W WB

NN K

MFD Extruded Thrusters

Track-Mounted Switches

5.1 4.1

4.4

How to Order

Two-wire Reed Switches

Model Number Description

MCS1-G-050 2-wire reed switch; 5 meter leads MCS1-G-C08 2-wire reed switch; M8 male quick-connect; 150mm wire length MCS1-G-C12 2-wire reed switch; M12 male quick-connect; 150mm wire length

Three-wire Solid State Switches

25.3

LED Window

7±1

25±2

Wire Length 20

Model Number Description

MDS1-GN-050 3-wire solid state switch; 5 meter leads; NPN (sinking) MDS1-GN-C08 3-wire solid state switch; M8 male quick-connect; 150 mm wire length; NPN (sinking) MDS1-GN-C12 3-wire solid state switch; M12 male quick-connect; 150 mm wire length; NPN (sinking)

MDS1-GP-050 3-wire solid state switch; 5 meter leads; PNP (sourcing) MDS1-GP-C08 3-wire solid state switch; M8 male quick-connect; 150 mm wire length; PNP (sourcing) MDS1-GP-C12 3-wire solid state switch; M12 male quick-connect; 150 mm wire length; PNP (sourcing)

Specifications

Item/Type MCS1-G MDS1-GN MDS1-GP

Switch Logic SPST Normally Open

Sensor Type Reed Switch with contact NPN PNP

Operating Voltage (V) 5-240V AC/DC 5-30V DC

Max. Switching Current

Current Consumption N/A 15mA Max. @ 24V

Temperature Range (°C) -10 to 70 Enclosure Classication IP67 (NEMA6)

(mA)

Switching Rating (W) 10 Max. 6 Max.

Voltage Drop 2.5V Max. @ 100mA DC 0.5V Max. @ 200mA DC

Cable

Indicator Red LED

Leakage Current N/A 0.01mA Max.

Sensitivity (Gauss) 60-75

Max. Frequency (Hz) 200 1000

Protection Circuit N/A

Ø3.3, 2C, Black oil resistant

PVC (Flame Retardant)

100 200

Transistor without contact,

Normally Open

Ø3.3, 3C, Black Oil Resistant

PVC

Power reverse polarity, surge

suppression

Bimba-Mead MTCM-32X80-S-T User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual