Billy Goat SC180H Owner's Manual

1

SC180H Owner’s Manual

BILLY GOAT SOD CUTTER

Part No 371508 Form No F091113A

Owner's Manual

SC180H

2

SC180H Owner’s Manual

SERIAL PLATE DATA AND SPECIFICATIONS 3
GENERAL SAFETY 4 -5
SOUND AND VIBRATION 6
INSTRUCTION LABELS 7
PACKING CHECKLIST & ASSEMBLY _______ 8
OPERATION CONTROLS/OPERATION 9-10
MAINTENANCE 11-12
TROUBLESHOOTING AND WARRANTY PROCEDURE 13
ILLUSTRATED PARTS & PARTS LISTS 14-23

Go to http://www.billygoat.com for French-Canadian translations of the product manuals.

Visitez http://www.billygoat.com pour la version canadienne-française des manuels de produits

ABOUT THIS MANUAL

THANK YOU for purchasing a BILLY GOAT ® Sod Cutter. Your new machine has been carefully designed and

manufactured to provide years of reliable and productive service. This manual provides complete operating and
maintenance instructions that will help to maintain your machine in top running order. Read this manual carefully
before assembling, operating, or servicing your equipment.

CONTENTS

Part No 371508 Form No F091113A

3

SC180H Owner’s Manual

Record the model number, serial number, date of
purchase, and where purchased.

Purchase Date:

Purchased From:

Engine: HP

5.5 HP (4.1 kw)

Engine: Model

GXV160UH2N1AH

Engine: Type

Honda

Engine: Fuel Capacity

1.6 qt. (1.5 L)

Engine: Oil Capacity

0.69 qt. (0.65 L)

Total Unit Weight:

348# (158 Kg)

Max. operating slope

20o

Overall length

54” (1371mm)

Overall width

26.5” (660mm)

Overall height

36.5” (927mm)

In accordance with 2000/14/EEC

104dBa

Sound at operators position

84dBa

Vibration at operator position

2.5g (24.8m/s2)

SERIAL PLATE DATA

Specifications
SC180H

Part No 371508 Form No F091113A

4

SC180H Owner’s Manual

This symbol indicates important information that will prevent injury to yourself or others.

This symbol indicates ear protection is recommended when operating this equipment.

This symbol indicates eye protection is recommended when operating this equipment.

This symbol indicates gloves should be worn when servicing this equipment.

This symbol indicates that this manual and the engine manufacturer’s manual should be read
carefully before assembling, operation, or servicing this equipment.

This symbol indicates important information that will prevent damage to your BILLY GOAT ®
Sod Cutter.

This symbol indicates the engine oil level should be checked before operating this
equipment.

READ this manual and the engine manufacturer’s manual carefully before assembling,
operating, or servicing this equipment.

EAR PROTECTION is recommended when operating this equipment.

EYE PROTECTION is recommended when operating this equipment.

BREATHING PROTECTION is recommended when operating this equipment.

EXHAUST from this product contains chemicals known to the State of California to cause

cancer, birth defects or other reproductive harm.
DO NOT operate this equipment on any unimproved forested, brushy, or grass covered land

unless a spark arrester is installed on the muffler as required by Section 4442 of the
California Public Resources Code. The arrester must be maintained in good working order.
Other states may have similar laws. Federal laws apply on federal lands.

DO NOT run engine in an enclosed area. Exhaust gases contain carbon monoxide, an
odorless and possibly fatal poison.

GENERAL SAFETY INSTRUCTIONS and SYMBOLS

The safety symbols shown below are used throughout this manual. You should become familiar with them before
assembling, operating, or servicing this equipment.

Read and make sure you thoroughly understand the following safety precautions before assembling, operating or
servicing this equipment:

Part No 371508 Form No F091113A

5

SC180H Owner’s Manual

DO NOT run this equipment indoors or in any poorly ventilated area. Refueling outdoors is recommended.

DO NOT refuel this equipment while the engine is running. Allow engine to cool for at least two minutes before

refueling.

DO NOT store gasoline near an open flame.
DO NOT remove gas cap while engine is running.
DO NOT start or operate engine if strong odor of gasoline is present.
DO NOT start or operate engine if gasoline is spilled. Move equipment away from spill until gasoline has completely

evaporated.

DO NOT smoke while filling the fuel tank.
DO NOT check for spark with spark plug or spark plug wire removed. Use an approved spark tester.
DO NOT operate engine without a muffler. Inspect muffler periodically and replace if necessary. If equipped with

muffler deflector, inspect deflector periodically and replace if necessary.

DO NOT operate engine with grass, leaves or other combustible material near the muffler.
DO NOT touch muffler, cylinder, or cooling fins when hot. Contact with hot surfaces may cause severe burns.
DO NOT leave equipment unattended while in operation.
DO NOT park equipment on a steep grade or slope.
DO NOT operate equipment with bystanders in or near the work area.
DO NOT allow children to operate this equipment.
DO NOT operate equipment with guards removed.
DO NOT operate equipment near hot or burning debris or any toxic or explosive materials.
DO NOT operate equipment on slopes greater than specified in Specifications section of this manual.
DO NOT operate barefoot or wearing open sandals. Always wear substantial footwear
DO NOT place hands or feet underneath unit, or near any moving parts.
DO NOT pull backwards unless absolutely necessary
DO NOT operate the Sod Cutter while under the influence of alcohol or drugs.
DO NOT use near drop-offs, ditches, or embankments. The operator could lose footing or balance
DO NOT use on excessively steep slopes.
DO NOT ride or climb or the machine while in operation.

DO NOT change the engine governor setting or overspeed the engine.
ALWAYS be sure of your footing; keep a firm hold on the handle and walk; never run.
ALWAYS Stop the blade(s) when crossing gravel drives, walks, or roads.
ALWAYS Shut the engine (motor) off and wait until the blade comes before servicing.
ALWAYS use only in daylight or good artificial light.
ALWAYS Disengage the drive lever and blade lever before starting the engine.
ALWAYS wear safety goggles or safety glasses with side shields
ALWAYS remove spark plug wire when servicing equipment to prevent accidental starting.
ALWAYS check fuel lines and fittings frequently for cracks or leaks. Replace if necessary.
ALWAYS store fuel in approved safety containers.
ALWAYS wear proper foot apparel when sod cutting.

WARNING: Important

Remove all rocks, wire, string, etc. that can present a hazard during work prior to starting.

DO identify and mark all fixed objects to be avoided during work such as sprinkler heads, water valves, limbs, or

clothes line anchors, etc.

WARNING: IMPORTANT! This cutting machine is capable of amputating hands and feet and throwing objects.

Failure to observe the following safety instructions could result in serious injury or death.

Part No 371508 Form No F091113A

6

SC180H Owner’s Manual

General Conditions: Sunny
Temperature: 84oF (28.9oC)
Wind Speed: 10 mph (16.1 kmh)
Wind Direction: East Southeast
Humidity: 37%
Barometric Pressure: 30.04 Hg (101.7 kpa)

General Conditions: Sunny
Temperature: 84oF (28.9oC)
Wind Speed: 10 mph (16.1 kmh)
Wind Direction: East Southeast
Humidity: 37%
Barometric Pressure: 30.04 Hg (101.7 kpa)

SOUND

SOUND LEVEL 84 dB(a) at Operator Position

104 dB(a)
Sound tests were conducted in accordance with 2000/14/EEC, and were performed on 7-11-13 under the

conditions listed below.

Sound power level listed is the highest value for any model covered in this manual. Please refer to serial plate on

the unit for the sound power level for your model.

VIBRATION DATA

VIBRATION LEVEL 2.5 g (24.8 m/s2)

Vibration levels at the operator’s handles were measured in the vertical, lateral and longitudinal directions using

calibrated vibration test equipment. Tests were performed on 7-11-13 under the conditions listed below.

INTENDED USE

INTENDED USE: This machine may only be utilized for the purpose for which it was designed, i.e. to cut 18in (45.7

cm) wide strips of turf. Make sure that all operators of this equipment are trained in general machine use and safety.

During operation the lawn and turf are cut into strips. Should the cutter’s
wheels skid during use it is advisable to adjust the cutting depth. If this operation does
not prevent this occurrence check the state of the terrain. If it is too dry it should be
wetted so that the blade encounters a slight resistance, thus making cutting operations
easier.

Part No 371508 Form No F091113A

7

SC180H Owner’s Manual

INSTRUCTION LABELS

The labels shown below were installed on your BILLY GOAT ® Sod Cutter. If any labels are damaged or missing, replace them before operating
this equipment. Item numbers from the Illustrated Parts List and part numbers are provided for convenience in ordering replacement labels. The
correct position for each label may be determined by referring to the Figure and Item numbers shown.

LABEL DANGER KEEP HANDS LABEL TIE DOWN LABEL WARNING GUARDS
AND FEET AWAY P/N 371505 P/N 900327
P/N 400424

LABEL INSTRUCTION DRIVE LABEL INSTRUCTION DEPTH LABEL GREASE POINTS
P/N 371503 P/N 371500 P/N 371502

LABEL SHIFTER CONTROL LABEL DRIVE RELEASE LABELS CASTER LOCK
P/N 371507 P/N 371506 P/N 371501 & 371504

Part No 371508 Form No F091113A