
Image sho
Standar
d on QV
models. For
dusty
conditions.
T
raps dust
keeping it
away from the
operator.
5" (127mm) x
10'
(3m) collapsible
hose for
vacuuming in
hard
areas
Filters out dust
from vacuum
exhaust.
Directs dust
a
way from the
operator.
Locks the
rear w
heels to
prevent
freewheeling.
wn with optional accessories
Owner's Manual
Accessories Debris bags and Filter
KIT
-to-r
each
Part No 831
500 Form No F052912A
SKIRT
QV550HSP, QV900H
BRAKE
DEBRIS
SP
BAG
DUST SOCK

CONTENTS
PACKING CHECKLIST AND ASSEMBLY
14
MAINTENANCE RECORD________________________________________________15
SOUND/VIBRATION ___ _____ 3
4
______ _5
AND BAG CARE _6-
AND TROUBLESHOOTING ______8-
PARTS & PART LISTS 10-
Part No 831500 Form No F052912A

In accordance with
2000/14/EEC
Vibration at operator
position
General Conditions: Sunny
Temperature:
Wind Speed:
Wind Direction:
Humidity:
Barometric Pressure: 30.15”Hg (766 mm Hg)
General Conditions: Sunny
Temperature:
Wind Speed:
Wind Direction:
Humidity:
Specifications
QV550HSP QV900HSP
5.5 (4.1 kW)
GX160T1QX2
3.88 qt. (3.6 L)
226# (102.5
GX270K1QA2
6.3 qt. (6.0L)
1.16 qt. (1.1L)
248# (112.5
63” (1.6m) 63” (1.6m)
33” (0.84m) 33” (0.84m)
51” (1.3 m) 51” (1.3 m)
e
79 dBa 84 dBa
99 dBa 104 dBa
0.38g (3.73m/s
2
0.47g (4.65m/s
SOUND
Sound tests were conducted in accordance with 2000/14/EEC, and were performed on 4-12-12 under the conditions listed below.
Sound power level listed is the highest value for any model covered in this manual. Please refer to serial plate on the unit for the sound
power level for your model
104 dB
.
SOUND LEVEL 84 dB(a) at Operator Position
46oF (8oC)
13 mph (21 kmh)
South East
55%
VIBRATION DATA
VIBRATION LEVEL 0.47g (4.65 m/s2)
Vibration levels at the operator’s handles were measured in the vertical, lateral and longitudinal directions using calibrated vibration test
equipment. Tests were performed on 4-12-12 under the conditions listed below.
46oF (8oC)
13 mph (21 kmh)
South East
55%
30.15”Hg (766 mm Hg)
Part No 831500 Form No F052912A
200
2

INSTRUCTION LABELS
The labels shown below were installed on your BILLY GOAT ® QVSP Vacuum. If any labels are damaged or missing, replace them before
operating this equipment. Item numbers from the Illustrated Parts List and part numbers are provided for convenience in ordering replacement
labels. The correct position for each label may be determined by referring to the Figure and Item numbers shown.
LABEL WARNING LABEL THROTTLE LABEL DANGER GUARDS
ITEM #35 P/N 831265 ITEM #106 P/N 810656 ITEM #106 P/N 900327
LABEL DRIVE DIRECTION INSTRUCTION LABEL
ITEM # 38 P/N 831270 ITEM # 37 P/N 831258
ENGINE LABELS
Part No 831500 Form No F052912A