Billy Goat PR550, PR550H, PR550V, PR550HV, OS551 User Manual
...
2
REPLACEMENT PARTS
FLAIL BLADES
P/N 350186.
A complete replacement set. 52
of our high quality flail blades for
your PR. Includes 8 new lock
clips for replacement installation.
FLAIL SHAFTS
P/N 350185.
A full set of four shafts for
replacement. Includes 8 new
lock clips for replacement
installation.
Note: We recommend
replacing the shafts when you
replace flails.
DRIVE BELT
P/N 350116.
Original Equipment drive belt for
your PR.
SPACER BUMPERS
P/N 350258.
A complete replacement set.
44 of 1/2" spacer bumpers
and 4 of 1/4" spacer bumpers
1
ACCESSORIES
SLICING REEL
P/N 350113.
A complete verti-slicing reel for
your PR. 20" wide reel for use
in grasses that require vertical
cutting, and for assisting in lawn
overseeding projects.
SLICING BLADES
P/N 350187.
A full set of twenty blades for
replacement. Includes 40 new
capscrews, and lock nuts for
replacement installation.
OVERSEEDER KIT
P/N 350325 / 350328.
The new light weight Plastic
Overseeding Kit is constructed
of durable High Density
Polypropolene with two lift
handles on each side to assist
in lifting the entire unit and easily
converts a PR Series Power
Rake into an overseeder with 4
bolts and minimal tools.
NOTE: Overseeder Conversion
Kit (350328) includes Slicing
Reel (350113). Part No.
(350325) comes with the
Overseeder Box only.
NEW
Thank You for SelectingThank You for Selecting
Thank You for Selecting
Thank You for SelectingThank You for Selecting
The Powerful PR and OS
POWER RAKES and OVERSEEDERS
Operator Owner's Manual
PR550, PR550H, PR550V,
PR550HV, OS551, OS551H
3
PR550 PR550V PR550H PR550HV OS551 OS551H
ENGINE: H.P. 5.5 (4.1 kW) 5.5 (4.1 kW) 5.5 (4.1 kW) 5.5 (4.1 kW) 5.5 (4.1 kW) 5.5 (4.1 kW)
ENGINE: TYPE B&S OHV B&S OHV HONDA OHV HONDA OHV B&S OHV HONDA OHV
ENGINE: FUEL CAP. 3.0 qt. (2.84 L) 3.0 qt. (2.84 L) 3.88 qt. (3.6 L) 3.88 qt. (3.6 L) 3.0 qt. (2.84 L) 3.88 qt. (3.6 L)
ENG IN E: O IL C AP. 0.66 qt. (0.62 L) 0.66 qt. (0.62 L) 0.69 qt. (0.65 L) 0.69 qt. (0.65 L) 0.66 qt. (0.62 L) 0.69 qt. (0.65 L)
WEIGHT: UNIT 160# (72.5 kg) 163# (74.1 kg) 158# (71.8 kg) 161# (73.2 kg) 173# (78.5 kg) 171# (77.6 kg)
WEIGHT: SHIPPING 183# (83.0 kg) 183# (83.0 kg) 178# (80.9 kg) 178# (80.9 kg) 208# (94.3 kg) 209# (94.8 kg)
ENG IN E W EIGHT: 36# (16.3 kg) 36# (16.3 kg) 34# (15.4 kg) 34# (15.4 kg) 36# (16.3 kg) 34# (15.4 kg)
MAX. EN GINE OPERATING S LOPE 15° 15° 20° 20° 15° 20°
Specifications
Part No. 350324 Form No. F031605A
Page 1 of 16
5
IN THE INTEREST OF SAFETY
BEFORE STARTING ENGINE, READ AND UNDERSTAND THE “ENTIRE OPERATOR'S MANUAL & ENGINE MANUAL.”
THIS SYMBOL MEANS WARNING OR CAUTION. DEATH, PERSONAL INJURY AND/OR PROPERTY
DAMAGE MAY OCCUR UNLESS INSTRUCTIONS ARE FOLLOWED CAREFULLY.
WARNING: The Engine Exhaust from this product contains chemicals known
to the State of California to cause cancer, birth defects or other reproductive harm.
WARNING: DO NOT
1. DO NOT run engine in an enclosed area.
Exhaust gases contain carbon monoxide, an
odorless and deadly poison.
2. DO NOT place hands or feet near moving
or rotating parts.
3. DO NOT store, spill or use gasoline near
an open flame, or devices such as a stove,
furnace, or water heater which use a pilot
light or devices which can create a spark.
4. DO NOT refuel indoors where area is not
well ventilated. Outdoor refueling is recommended.
5. DO NOT fill fuel tank while engine is
running. Allow engine to cool for 2 minutes
before refueling. Store fuel in approved
safety containers.
6. DO NOT remove fuel tank cap while
engine is running.
7. DO NOT operate engine when smell of
gasoline is present or other explosive
conditions exist.
8. DO NOT operate engine if gasoline is
spilled. Move machine away from the spill
and avoid creating any ignition until the
gasoline has evaporated.
9. DO NOT transport unit with fuel in tank.
10. DO NOT smoke when filling fuel tank.
11. DO NOT choke carburetor to stop
engine. Whenever possible, gradually
reduce engine speed before stopping.
13. DO NOT tamper with governor springs,
governor links or other parts which may
change the governed engine speed.
14. DO NOT tamper with the engine speed
selected by the engine manufacturer.
15. DO NOT check for spark with spark plug
or spark plug wire removed. Use an
approved tester.
16. DO NOT crank engine with spark plug
removed. If engine is flooded, place throttle
in “FAST” position and crank until engine
starts.
17. DO NOT strike flywheel with a hard
object or metal tool as this may cause
flywheel to shatter in operation. Use proper
tools to service engine.
18. DO NOT operate engine without a
muffler. Inspect periodically and replace, if
necessary. If engine is equipped with
muffler deflector, inspect periodically and
replace, if necessary, with correct deflector.
19. DO NOT operate engine with an
accumulation of grass, leaves, dirt or other
combustible material in the muffler area.
20. DO NOT use this engine on any forest
covered, brush covered, or grass covered
unimproved land unless a spark arrester is
installed on the muffler. The arrester must
be maintained in effective working order by
the operator. In the State of California the
above is required by law (Section 4442 of
the California Public Resources Code).
Other states may have similar laws. Federal
laws apply on federal lands.
21. DO NOT touch hot muffler, cylinder, or
fins because contact may cause burns.
22. DO NOT run engine without air cleaner
or air cleaner cover.
23. DO NOT operate during excessive
vibration!
24. DO NOT leave machine unattended
while in operation.
25. DO NOT park machine on a steep grade
or slope.
WARNING: DO
1. ALWAYS DO remove the wire from the
spark plug when servicing the engine or
equipment TO PREVENT ACCIDENTAL
STARTING.
2. DO keep cylinder fins and governor
parts free of grass and other debris
which can affect engine speed.
3. DO pull starter cord slowly until resistance is felt. Then pull cord rapidly to avoid
kickback and prevent hand or arm injury.
4. DO examine muffler periodically to be
sure it is functioning effectively. A worn or
leaking muffler should be repaired or
replaced as necessary.
5. DO use fresh gasoline. Stale fuel can
gum carburetor and cause leakage.
6. DO check fuel lines and fittings frequently
for cracks or leaks. Replace if necessary
7. Follow engine manufacturer operating
and maintenance instructions.
8. Inspect machine and work area before
starting unit.
12. DO NOT run engine at excessive
speeds. This may result in injury & /or
damage to unit.
TABLE OF CONTENTS
6
SAFETY INSTRUCTIONS
GENERAL SAFETY
ASSEMBLY
CONTROLS
LABELS
OPERATION
MAINTENANCE
PARTS DRAWING & LIST...
TROUBLESHOOTING
WARRANTY PROCEDURE
○○○○○○○○
○○○○○○○○
○○○○○○○○
○○○○○○○
○○○○○○
○○
○○○○○
4 - 5
6 - 9
10
14 - 15
○○○
2
3
3
4
16
16
7
Sound tests conducted were in accordance with 2000/14/EEC
and were performed on 2/13/2002 under the conditions listed:
NOTE: Sound power level listed is the highest value for any model in this manual. Please
refer to serial plate on the unit for the sound power level for your model.
Sound level of 82 dBA at operator position
GENERAL CONDITION:
101 dB
(PR550 MODEL)
BAROMETRIC PRESSURE:
SOUND
TEMPERATURE:
WIND SPEED:
WIND DIRECTION:
HUMIDITY:
Part No. 350324 Form No. F031605APage 2 of 16
Sunny
48° F (8.9° C)
2 MPH (3.2 kmh)
South East
29 %
30.34" Hg (770mm Hg)
8
Vibration levels at the operators handles were
measured in the vertical, lateral, and longitudinal
directions using calibrated vibration test equipment.
Tests were performed on 09/08/97 under the
conditions listed:
GENERAL CONDITION:
WIND DIRECTION:
BAROMETRIC PRESSURE:
VIBRATION
VIBRATION LEVELS 3.2 g max.
Sunny
TEMPERATURE:
WIND SPEED:
HUMIDITY:
85° F (29.4° C)
10 MPH (16.1 kmh)
East
31 %
29.91" Hg (760mm Hg)
9
GENERAL SAFETY
For your safety and the safety of others, these directions should be followed:
Do not operate this machine without first reading
owner's manual and engine manufacturer's manual.
Use of Ear Protection is recommended while
operating this machine.
Use of Eye and Breathing protection is recommended
when using this machine, especially in dry and dusty
conditions.
Wearing gloves is recommended while
operating this machine.
·DO NOT place hands or feet underneath unit, near debris
outlet or near any moving parts.
·DO NOT start engine without height adjust lever in up
position and clutch bail disengaged.
·DO NOT start or operate machine with guards removed.
·DO NOT perform any service on the unit without removing
the spark plug wire.
10
ASSEMBLY
·DO NOT operate a machine that exhibits excessive vibration.
·DO NOT operate this machine on slopes greater than19°.
·DO NOT use this unit on any surface other than grass lawns.
·DO NOT allow children to operate this equipment.
-DO read all maintenance and operating instructions before begining
work.
-DO read all engine manufacturers operating and maintenance
instructions.
-DO inspect lawn before begining work. Remove all rocks, wire,
string, or other objects that can present a hazard during work prior to
starting.
-DO identify and mark all fixed objects to be avoided during work,
such as sprinkler heads, water valves, buried cables, or clothes line
anchors, etc.
Read all safety and operating instructions
before assembling or starting this unit.
PUT OIL IN ENGINE BEFORE STARTING
Your Billy Goat Power Rake is shipped from the factory in one
carton, completely assembled.
11
PACKING CHECKLIST
These items should be included in your carton. If
any of these parts are missing, contact your dealer.
26
28
28
1. UNFOLD the upper handle (item 26) and slide handle lock
loops(item 28) into place to secure the upper handle to the lower.
2. CHECK engine oil level and fill to proper level with engine manufacturers recommended grade of oil. Move height adjust lever to down
position, to level engine during checking. See engine manufacturers
instruction manual.
3. CONNECT spark plug wire.
Per Model
Check
Briggs & Stratton
Engine
Manual Per
Model
28
5.5 Intek OHV
Check
Honda 5.5 OHV
Check
Owner's
Manual
350324
Check
Literature PR
Literature
Assembly
350110
PR550, PR550H,
PR550V, & PR550HV
Part No. 350324 Form No. F031605A
OS551 & OS551H
Page 3 of 16
Check
Check
Accessories
350140
Warranty
Card 400972
EU Declaration
of Conformity &
EU Distributor
List 350139
13
CONTROLS
B & S ENGINE THROTTLE CONTROLHONDA ENGINE THROTTLE CONTROL
FUEL VALVE
15
ENGINE LABELS
Briggs & Stratton
ON
THROTTLE LEVER
CHOKE LEVER
RUN CHOKE
Set lever to choke position when
starting a cold engine
RUN
STOP
Set lever to desired engine speed.
Move lever completely to the left to stop
engine
CHOKE
OFF
Honda
..
Read and follow Operating
Instructions before running engine.
Gasoline is flammable. Allow engine
to cool at least 2 minutes before fueling.
Engines emit carbon monoxide,
DO NOT run in enclosed area.
'
'
'
OIL ALERT
WHEN OIL LEVEL LOW,
ENGINE STOPS IMMEDIATELY.
Part No. 350324 Form No. F031605APage 4 of 16
14
INSTRUCTION LABELS
These labels should be included on your Power Rake. If any of these labels are damaged, replace them before putting this
equipment into operation. Item and part numbers are given to help in ordering replacement labels.
WARNING
EXPLOSIVE FUEL
STOP ENGINE AND ALLOW TO
COOL BEFORE REFUELING.
Label Do Not Fill While
Engine Is Hot
Item 50 Part No.400268
WARNING
RELEASE TO DISENGAGE CLUTCH
PULL TO ENGAGE CLUTCH
Label Clutch Item 49
Part No.830503
400268
Label Danger Keep Hands
and Feet Away
Item 51 Part No.400424
830503
DANGER
900327
810736
ROTATE KNOB TO ADJUST BLADE DEPTH-
BLADES UP
BLADES DOWN
BLADES UP
TRANSPORT POSITION
BLADES DOWN
OPERATING POSITION
CAUTION
READ OWNERS MANUAL
BEFORE OPERATING
USE PERSONAL
PROTECTION EQUIPMENT
PROTECT BYSTANDERS
FLYING DEBRIS
BEFORE STARTING, MAKE SURE:
HEIGHT ADJUST LEVER IS IN UP POSITION.
ALL GUARDS ARE ATTACHED.
FOR PREVENTATIVE MAINTENANCE
CHECK ENGINE OIL DAILY
INSPECT AND CLEAN ENGINE AIR FILTER
DAILY. REPLACE AS NEEDED.
GREASE REEL BEARINGS AND LUBRICATE DEPTH
CONTROL LEVER EVERY ENGINE OIL CHANGE.
INSPECT MACHINE BEFORE EACH USE AND REPLACE ANY
WORN AND DAMAGED PARTS.
PROPERLY SECURE EQUIPMENT BEFORE TRANSPORTING.
DISCONNECT SPARK PLUG WIRE BEFORE SERVICING UNIT.
USE ONLY A QUALIFIED MECHANIC TO SERVICE THIS MACHINE.
.
ALWAYS:
1
2
3
4
5
BLADE DEPTH
6
350176
Label Danger Guard
Item 52 Part No.900327
LAWN PREPARATION:
- MOW LAWN TO LOWEST SETTING ON YOUR MOWER.
- DO NOT WATER PRIOR TO SEEDING.
- POWER RAKE TO DETHATCH LAWN AND REMOVE THATCH.
- FERTILIZE LAWN WITH BROADCAST SPREADER.
SEEDING RECOMMENDATIONS:
- FOR BEST RESULTS OVERSEED IN TWO PASSES OF ONE-HALF
APPLICATION RATE AT RIGHT ANGLES OR IN A CRISS-CROSS PATTERN.
- WATER HEAVILY IMMEDIATELY THEN LIGHTLY FOR 10 - 14 DAYS
KEEPING SOIL MOIST.
- AFTER GERMINATION, WATER LESS OFTEN TO PROMOTE GROWTH.
- PULL BACK ON THE KNOB THEN
SLIDE THE BRACKET TO DESIRED
0
STOP
SETTING
1
2
3
BRACKET
4
5
6
KNOB
STOP SETTING.
7
EXAMPLE: STOP SETTING IS ON 4
- IF SLICING WITHOUT DROPPING
SEEDS FOR LONG PERIOD OF TIME
THEN SET THE STOP SETTING TO
ZERO.
Label Danger Flying Material
Item 48 Part No.810736
Label Instructions Height Adjust
Item 35 Part No. 350176
SEED APPLICATION CHART:
THESE SETTINGS ARE APPROXIMATE GUIDELINES. SEEDING RATES ARE SPEED DEPENDENT.
FASTER TRAVEL DELIVERS LESS SEED.
SEED
TYPE
RYEGRASS
BLUEGRASS
FESCUE
RATE
LBS
2 2
1,000 FT
1/2
3/4
1 1/2
2 1/3
3/4
1
1 1/2
2 1/2
3/4
1 1/4
2
3 1/2
Label Instructions Seeder Box
Item 45 Part No. 350288
STOP
SETTING
1
2
3
4
3
4
5
6
5
6
7
8
SEED
TYPE
BENTGRASS
BERMUDAGRASS
(HULLED & ZOYSIA)
CENTIPEDEGRASS
(COATED)
ST. AUGUSTINE
GRASS
RATE
LBS
1,000 FT
2/3
1 1/3
3/4
1 2/3
2/3
1 1/4
2 1/2
3/4
1
1 1/3
1 1/2
STOP
SETTING
1
2
1
2
1
2
3
3
4
5
6
REFERENCE
CHART
SCOTTS
BILLY
SEEDER
GOAT
SETTING
SEEDER
(ALL DROP
SETTING
5
6
7
8
9
SEEDER
MODELS)
6 1/3
8
10
15 1/2
17
Part No. 350324 Form No. F031605A
Page 5 of 16
Loading...