Billy Goat PL25H Owner's Manual
PL25H Owner’s Manual
TINE REPLACEMENT
Replacement tip for aerating tines.
P/N 381057
TINE BUSHING REPLACEMENTS
Replacement bushings for the tines
P/N 380213
AERATOR Owner's Manual
PL2500H
U.S. PATENT #6892821
Replacement Parts
Part No 100382 1 Form No F072215B
PL25H Owner’s Manual
2
SPECIFICATIONS 3
INTENDED USE 4
INSTRUCTION LABELS 5
PACKING CHECKLIST & ASSEMBLY 6
OPERATION 7
MAINTENANCE 8
TROUBLE SHOOTING AND WARRANTY INFORMATION 9
ILLUSTRATED PARTS & PARTS LIST 10-11
CONTENTS
Part No 100382 Form No F072215B
PL25H Owner’s Manual
3
Engine: cc
163cc
Engine:
Honda GX160
w/Gearbox
Engine: Fuel Capacity
3.3 qt. (3.1 L)
Engine: Oil Capacity
0.61 qt. (0.58 L)
Total Unit Weight:
284# (128.8 Kg)
Length
67.5” (1.7m)
Width
32.5” (.83m)
Height
41.25” (1m)
Max. operating slope
15o
Sound test in
accordance with
2000/14/EC
102
Sound at operators
ear
82
Vibration at operator
position
.2g (1.90m/s2)
102
SPECIFICATIONS
PL2500H
SOUND
Sound tests were conducted in accordance with 2000/14/EC, and were performed on 9/26/14 under the conditions listed below.
Sound power level listed is the highest value for any model covered in this manual. Please refer to serial plate on the unit for
the sound power level for your model.
General Conditions: Sunny
Temperature: 66oF (18.9oC)
Wind Speed: 8 mph (12.8 kph)
Wind Direction: South
Humidity: 78%
Barometric Pressure: 30 Hg (101.59 kpa)
VIBRATION DATA
Vibration levels at the operator’s handles were measured in the vertical, lateral and longitudinal directions using calibrated
vibration test equipment. Tests were performed on 9/25/14 under the conditions listed below.
General Conditions: Sunny
Temperature: 79oF (26oC)
Wind Speed: 13 mph (21 kph)
Wind Direction: South
Humidity: 47%
Barometric Pressure: 30Hg (101.6 kpa)
Part No 100382 Form No F072215B
SOUND LEVEL 82 dB(a) at Operators Position
VIBRATION LEVEL .2g (1.90 m/s2)
PL25H Owner’s Manual
4
INTENDED USE
AERATOR
This machine is designed for aerating established lawns and large grass covered areas. The machine should not be used for
any other purpose than that stated above.
DO NOT OPERATE IF EXCESSIVE VIBRATION OCCURS! If excessive vibration occurs, shut engine
off immediately and check for damaged or worn reel, loose reel bearing, loose engine or lodged debris. To remove debris from
the machine, see the machine specific trouble shooting section. Note: See parts list for proper bolt torque specifications.
HANDLING & TRANSPORTING
Always use two or more people to lift these machines. Lift holding on either side of the machine, using the handles and the
frame. Secure in place during transportation. See specifications for unit weight.
For safety use gloves when lifting.
Never lift any machine while the engine is running.
Part No 100382 Form No F072215B
Loading...