
Replacement tip for aerating tines.
TINE BUSHING REPLACEMENTS
Replacement bushings for the tines
AERATOR Owner's Manual
PL2500SPH
U.S. PATENT #6892821
Replacement Parts
Part No 100383 Form No F010515C

SPECIFICATIONS _____________________ ___ 3
SAFETY INSTRUCTIONS______________ ___ 4-6
INSTRUCTION LABELS _____7
PACKING CHECKLIST & ASSEMBLY 8
OPERATION _9
MAINTENANCE ____________________ _ 10
TROUBLE SHOOTING AND WARRANTY ___________________________________11
ILLUSTRATED PARTS & PARTS LIST 12-13
CONTENTS
Part No 100383 Form No F010515C

Sound test in accordance
with 2000/14/EC
Vibration at operator
position
Specifications
PL2500SPH
SOUND
SOUND LEVEL 82 dB(a) at Operators Position
Sound tests were conducted in accordance with 2000/14/EC, and were performed on 9/26/14 under the conditions
listed below.
Sound power level listed is the highest value for any model covered in this manual. Please refer to serial plate on
the unit for the sound power level for your model.
General Conditions: Sunny
Temperature: 66oF (18.9oC)
Wind Speed: 8 mph (12.8 kph)
Wind Direction: South
Humidity: 78%
Barometric Pressure: 30 Hg (101.59 kpa)
VIBRATION DATA
VIBRATION LEVEL .61g (6.00 m/s2)
Vibration levels at the operator’s handles were measured in the vertical, lateral and longitudinal directions using
calibrated vibration test equipment. Tests were performed on 9/25/14 under the conditions listed below.
General Conditions: Sunny
Temperature: 79oF (26oC)
Wind Speed: 13 mph (21 kph)
Wind Direction: South
Humidity: 47%
Barometric Pressure: 30Hg (101.6 kpa)
Part No 100383 Form No F010515C

This symbol indicates important information that will prevent injury to yourself or others.
This symbol indicates ear protection is recommended when operating this equipment.
This symbol indicates eye protection is recommended when operating this equipment.
This symbol indicates gloves should be worn when servicing this equipment.
This symbol indicates that this manual and the engine manufacturer’s manual should be read carefully
before assembling, operation, or servicing this equipment.
This symbol indicates important information that will prevent damage to your BILLY GOAT ®
Machine.
This symbol indicates the engine oil level should be checked before operating this equipment.
READ this manual and the engine manufacturer’s manual carefully before assembling, operating, or
servicing this equipment.
EAR PROTECTION is recommended when operating this equipment.
EYE PROTECTION is recommended when operating this equipment.
BREATHING PROTECTION is recommended when operating this equipment.
EXHAUST from this product contains chemicals known to the State of California to cause cancer, birth
defects or other reproductive harm.
DO NOT operate this equipment on any unimproved forested, brushy, or grass covered land unless a
spark arrester is installed on the muffler as required by Section 4442 of the California Public Resources
Code. The arrester must be maintained in good working order. Other states may have similar laws.
Federal laws apply on federal lands.
DO NOT run engine in an enclosed area. Exhaust gases contain carbon monoxide, an odorless and
possibly fatal poison.
GENERAL SAFETY SYMBOLS
The safety symbols shown below are used throughout this manual. You should become familiar with them before assembling,
operating, or servicing this equipment.
Read and make sure you thoroughly understand the following safety precautions before assembling, operating or servicing this
equipment:
Part No 100383 Form No F010515C