Billy Goat F902H, F1802V, F902SPH, F1302H, F1802SPV General Safety And Warranty

Not for Reproduction

BILLY GOAT DEBRIS LINE

GENERAL SAFETY AND

WARRANTY

100294 1 F061512A

Force models

Debris Loader models

Vacuum models

VQ902SPH

Not for Reproduction

BILLY GOAT DEBRIS LINE

Covers Models

F601S
F601HS
F902S
F902H
F1302H
F1402S
F1802V
F902SPH
F902SPS
F1302SPH
F1802SPV

DL1201L
DL1301H
DL1801V
DL1801VE
DL2500S
DL1301HEU
DL1401SEEU
DL1801VEEU
DL3500V

MV650 VQ1002SP
MV650SPH LB351
KV600 LB61
KV650H QV550
KV600FB QV550H
KV650HFB QV550HSP
KV600SP QV900HSP
KV650SPH
TKV650SPH
KV600SPFB
KV650SPHFB
TKV650SPHFB

100294 2 F061512A

ABOUT THIS MANUAL

Record the model number, serial number, date of
purchase, and where purchased.

Purchase Date:

Purchased From:

Not for Reproduction

THANK YOU for purchasing a BILLY GOAT ®. Your new machine has been carefully designed and

manufactured to provide years of reliable and productive service. This manual will provide you with safety instructions
and general maintenance tips that will help to keep your machine in top running order. Please read this manual and the
assembly/parts list manual carefully before assembling, operating, or servicing your equipment.

TABLE OF CONTENTS

SERIAL PLATE DATA_________________________________________________pg. 3

SAFETY INSTRUCTIONS AND SYMBOLS_________________________________pg. 4

GENERAL INSTRUCTION LABELS_______________________________________pg. 5-6

INTENDED USE_______________________________________________________pg. 6

GENERAL STARTING AND OPERATION__________________________________pg. 7

WARRANTY INFORMATION____________________________________________pg. 8

MAINTENANCE RECORD_______________________________________________pg 9

SERIAL PLATE DATA

100294 3 F061512A

GENERAL SAFETY SYMBOLS

This symbol indicates important information that will prevent injury to yourself or others.

This symbol indicates ear protection is recommended when operating this equipment.

This symbol indicates eye protection is recommended when operating this equipment.

This symbol indicates gloves should be worn when servicing this equipment.

This symbol indicates that this manual and the engine manufacturer’s manual should be read carefully

before assembling, operation, or servicing this equipment.

This symbol indicates important information that will prevent damage to your BILLY GOAT ®
Machine.

This symbol indicates the engine oil level should be checked before operating this equipment.

READ this manual and the engine manufacturer’s manual carefully before assembling, operating, or
servicing this equipment.

EAR PROTECTION is recommended when operating this equipment.

EYE PROTECTION is recommended when operating this equipment.

BREATHING PROTECTION is recommended when operating this equipment.

EXHAUST from this product contains chemicals known to the State of California to cause cancer, birth

defects or other reproductive harm.
DO NOT operate this equipment on any unimproved forested, brushy, or grass covered land unless a spark

arrester is installed on the muffler as required by Section 4442 of the California Public Resources Code. The
arrester must be maintained in good working order. Other states may have similar laws. Federal laws apply
on federal lands.

DO NOT run engine in an enclosed area. Exhaust gases contain carbon monoxide, an odorless and possibly
fatal poison.

Not for Reproduction

The safety symbols shown below are used throughout this manual. You should become familiar with them before assembling,
operating, or servicing this equipment.

Read and make sure you thoroughly understand the following safety precautions before assembling, operating or servicing this
equipment:

100294 4 F061512A

DEBRIS LINE SAFETY INSTRUCTION

DO NOT run this equipment indoors or in any poorly ventilated area. Refueling outdoors is recommended.
DO NOT refuel this equipment while the engine is running. Allow engine to cool for at least two minutes before

refueling.

DO NOT store gasoline near an open flame.
DO NOT remove gas cap while engine is running.
DO NOT start or operate engine if strong odor of gasoline is present.
DO NOT start or operate engine if gasoline is spilled. Move equipment away from spill until gasoline has

completely evaporated.

DO NOT smoke while filling the fuel tank.
DO NOT check for spark with spark plug or spark plug wire removed. Use an approved spark tester.
DO NOT operate engine without a muffler. Inspect muffler periodically and replace if necessary. If equipped with

muffler deflector, inspect deflector periodically and replace if necessary.

DO NOT operate engine with grass, leaves or other combustible material near the muffler.
DO NOT touch muffler, cylinder, or cooling fins when hot. Contact with hot surfaces may cause severe burns.
DO NOT leave equipment unattended while in operation.
DO NOT park equipment on a steep grade or slope.
DO NOT operate equipment with bystanders in or near the work area.
DO NOT allow children to operate this equipment.
DO NOT operate equipment with guards removed.
DO NOT operate equipment near or pick up hot or burning debris or any toxic or explosive materials.
DO NOT operate equipment on slopes greater than specified in Specifications section of this manual.
DO NOT place hands or feet inside nozzle intake, near debris outlet, or near any moving parts
DO NOT run this machine with a cracked or damaged impeller under any circumstances.
ALWAYS remove spark plug wire when servicing equipment to prevent accidental starting.

ALWAYS check fuel lines and fittings frequently for cracks or leaks. Replace if necessary.
ALWAYS keep hands and feet away from moving or rotating parts.
ALWAYS store fuel in approved safety containers.

Blowers Important

DO NOT run this machine without director cone attached or with improper air director cone.

DO NOT run this machine with a cracked or damaged impeller under any circumstances.

Vacuum Important

DO NOT use this machine for vacuuming exclusively sand, dust, fine dirt, rocks, glass, string like material,

grain, rags, cans, metal, bark or water.\

DO identify and mark all fixed objects to be avoided during work, such as sprinkler heads, water valves, buried

cables, or clothes line anchors, etc.

DO remove all rocks, wire, string, plastic, etc. that can present a hazard during work prior to starting.

Continued next page

Not for Reproduction

100294 5 F061512A

SAFETY INSTRUCTION CONTINUED

Debris loaders Important

DO NOT use this machine for vacuuming exclusively sand, dust, fine dirt, rocks, glass, string like material,

grain, rags, cans, metal, bark or water.

DO NOT start engine without hose and exhaust elbow connected firmly in place to housing and outlet

DO NOT operate without discharging exhaust into enclosed container.

DO NOT operate with hose or exhaust elbow removed.
DO NOT remove hose until engine has been turned off and has come to a complete stop.
DO NOT transport unit without securing exhaust elbow and making sure that the elbow will not strike

objects.

DO NOT operate this unit freestanding. Unit must be secured in place during any operation

IMPORTANT: With the machine off and spark plug disconnected check the condition of the
replaceable liner before every use and replace if necessary.

INTENDED USE

Not for Reproduction

BLOWER

This machine is designed for cleaning outdoor surfaces, where the debris can be effectively blown into a consolidated area for
convenient pickup and removal.

VACUUM

This machine is designed for vacuuming leaves, grass clippings and other types of organic litter.
Debris mixed with cans, bottles and small amounts of sand can be vacuumed; however, it is not this machine's primary purpose.
Vacuuming cans, bottles and sand will affect the longevity of your machine.

DEBRIS LOADER

This machine is designed for vacuuming leaves, grass clippings and other types of organic litter.
Debris mixed with cans, bottles and small amounts of sand can be vacuumed; however, it is not this machine's primary purpose.
Vacuuming cans, bottles and sand will affect the longevity of your machine.

ALL MACHINES

DO NOT OPERATE IF EXCESSIVE VIBRATION OCCURS! If excessive vibration occurs, shut engine off immediately and

check for damaged or worn impeller, loose impeller bolt, loose impeller key, loose engine or debris stuck in fan or housing. To
remove debris from impeller, see the machine specific trouble shooting section. Note: See parts list for proper impeller bolt torque

specifications.

HANDLING & TRANSPORTING

Always use two or more people to lift these machines. Lift holding the handle and handle brace. Secure in place during transportation.
See specifications for unit weight.

For safety use gloves when lifting.
Never lift any machine while the engine is running.

Blowers

Do not use the front grill as an anchor point when securing the unit for transport.

Never lift the machine while the engine is running

Vacuums

Lift holding the lower handle and the front wheels.

Debris loaders

DO NOT drag the hose when transporting
ALWAYS SECURE THE NOZZLE BEFORE TRANSPORTING UNIT

100294 6 F061512A

Fuel stabilizer (such as Sta-Bil

TM

) is an acceptable alternative for minimizing the formation of gum

deposits during storage. Add stabilizer to gasoline in storage container or fuel tank. Follow stabilizer

manufacturer’s instructions to determine proper mix ratio. Run engine at least 10 minutes after adding

stabilizer to allow it to reach carburetor.

Not for Reproduction

GENERAL STARTING AND OPERATING INFORMATION

BLOWERS

ENGINE: See engine manufacturer’s instructions for type and amount of oil and gasoline used. Engine must be level when

checking and filling oil and gasoline.

FUEL VALVE: Move fuel valve to "ON" position (when provided on engine).
STOP SWITCH: Located on the engine. "ON" position.
CHOKE: Operated with choke lever on side of engine.
THROTTLE: Controlled by throttle lever on the handle. Move remote throttle control to fast position. Pull starting rope to start

engine.
ENGINE SPEED: Under normal conditions, operate at minimum throttle to accomplish your current cleaning task.
IF YOUR UNIT FAILS TO START: check trouble shooting section.

VACUUMS

ENGINE: See engine manufacturer’s instructions for type and amount of oil and gasoline used. Engine must be level when

checking and filling oil and gasoline.
ENGINE SPEED: Controlled by throttle lever on the engine. Under normal conditions, operate at minimum throttle to accomplish
your current cleaning task.
CHOKE: Briggs-See primer.
Honda-Place remote throttle in choke position

PRIMER: Push primer per engine instructions (B&S only).
THROTTLE: Move throttle to fast/choke position. Located on handle.
IF YOUR UNIT FAILS TO START: check trouble shooting section.

DEBRIS LOADERS

LOADER MUST BE SECURED OR MOUNTED BEFORE STARTING

ENGINE: See engine manufacturer’s instructions for type and amount of oil and gasoline used. Engine must be level when checking and filling

oil and gasoline.

ENGINE SPEED: Controlled by throttle lever on the engine.
INTAKE HOSE: Hose mounting assembly must be properly attached to vac housing and safety switch must be engaged before engine will start.

Note: Any damage to the switch or wiring harness will prevent engine from starting.

THROTTLE: Move throttle control to fast position.

KEY SWITCH (Electric models): Turn to start position until engine begins to fire, immediately release the key to the run position.

Note: Do not hold key in start position more than 10 seconds per attempt.

IF YOUR UNIT FAILS TO START: See Troubleshooting on page 13. Also see engine owner's manual.

GENERAL OPERATION

Like all mechanical tools, reasonable care must be used when operating machine.
Inspect machine work area and machine before operating. Make sure that all operators of this equipment are
trained in general machine use and safety.

PUT OIL IN ENGINE BEFORE STARTING

STORAGE

Never store engine indoors or in enclosed poorly ventilated areas with fuel in tank, where fuel fumes may reach an open flame,
spark or pilot light, as on a furnace, water heater, clothes dryer or other gas appliance.
If engine is to be unused for 30 days or more, prepare as follows:

Remove all gasoline from carburetor and fuel tank to prevent gum deposits from forming on these parts and causing possible
malfunction of engine. Drain fuel outdoors, into an approved container, away from open flame. Be sure engine is cool. Do not
smoke. Run engine until fuel tank is empty and engine runs out of gasoline.

100294 7 F061512A

Not for Reproduction

WARRANTY INFORMATION

When servicing engine refer to specific manufacturers engine owner's manual. Engine warranty is covered by the specific engine
manufacturer. If your engine requires warranty or other repair work contact your local servicing engine dealer. When contacting a dealer
for service it is a good idea to have your engine model number available for reference (See table page 3). If you cannot locate a
servicing dealer in your area you can contact the manufacturers national service organization.
To reach:

American Honda: 800-426-7701
Briggs and Stratton: 800-223-3723
LCT: www.lctusa.com
Subaru America: 800-277-6246

WARRANTY CLAIM PROCEDURE

Should a BILLY GOAT ® machine fail due to a defect in material and/or workmanship, the owner should make a warranty claim as
follows:

 The machine must be taken to the dealer from whom it was purchased or to an authorized Servicing BILLY GOAT Dealer.
 The owner must present the remaining half of the Warranty Registration Card, or, if this is not available, the invoice or receipt.
 The Warranty Claim will be completed by the authorized BILLY GOAT Dealer and submitted to their respective BILLY GOAT

Distributor for their territory Attention: Service Manager. Any parts replaced under warranty must be tagged and retained for 90
days. The model number and serial number of the unit must be stated in the Warranty Claim.

 The distributor service manager will sign off on the claim and submit it to BILLY GOAT for consideration.
 The Technical Service Department at BILLY GOAT will study the claim and may request parts to be returned for examination.

BILLY GOAT will notify their conclusions to the distributor service manager from whom the claim was received.

 The decision by the Technical Service Department at BILLY GOAT to approve or reject a Warranty Claim is final and binding.

For online product registration go to www.billygoat.com

100294 8 F061512A

Date

Service Performed

Not for Reproduction

MAINTENANCE RECORD

100294 9 F061512A

Not for Reproduction

PRODUITS BILLY GOAT DE

TRAITEMENT DES DÉBRIS –

SÉCURITÉ ET GARANTIE

100294 10 F061512A

PRODUITS BILLY GOAT DE

Modèles puissants

Modèles d’enlèvement des débris

Aspirateurs

F601S
F601HS
F902S
F902H
F1302H
F1402S
F1802V
F902SPH
F902SPS
F1302SPH
F1802SPV

DL1201L
DL1301H
DL1801V
DL1801VE
DL2500S
DL1301HEU

DL1401SEEU
DL1801VEEU
DL3500V

MV650 VQ1002SP
MV650SPH LB351
KV600 LB61
KV650H QV550
KV600FB QV550H
KV650HFB QV550HSP
KV600SP QV900HSP
KV650SPH
TKV650SPH
KV600SPFB
KV650SPHFB
TKV650SPHFB
VQ902SPH

Not for Reproduction

TRAITEMENT DES DÉBRIS

Modèles de la page de couverture

100294 11 F061512A