Billy Goat LB35 Owner's Manual
1
LB Owner’s Manual
HOSE KIT
4"(102mm) x
7' (3.05m)
For
vacuuming in
hard to reach
areas.
HOSE
CONNECTOR
KIT
P/N 900460
To connect two
lengths of 4”
hose (hose not
included).
P/N 890045
BAG SUPPORT
KIT
Extends bag life
by keeping bag
from dragging
ground.
P/N 900645
STANDARD
FELT DEBRIS
BAGS
For use in
dusty
conditions.
P/N 900719
OPTIONAL
TURF DEBRIS
BAGS
For use in
leaves and
grass in nondusty
conditions.
P/N 900722
Optional Accessories
Part No 901015 Form No F051513A
Owner's Manual
LB352
2
LB Owner’s Manual
SPECIFICATIONS AND SOUND/ VIBRATION 3
INSTRUCTION LABELS 4
PACKING CHECKLIST & ASSEMBLY 5
OPERATION _ 6
MAINTENANCE AND TROUBLESHOOTING 7
ILLUSTRATED PARTS & PARTS LISTS 8-9
CONTENTS
Part No 901015 Form No F051513A
3
LB Owner’s Manual
Engine: cc
158cc
Engine: Type
B & S 500 series
Engine: Model
10T502 9305 14
Engine: Fuel Capacity
.9 qt (.85 L)
Engine: Oil Capacity
18 to 20 oz. (.54-.59L)
Total Unit Weight:
57# (25.85 kg)
Overall Length
47” (1.19 m)
Overall Width
21.5” (0.55 m)
Overall Height
40.5” (1.02 m)
Max. operating slope
200
Sound in accordance with
2000/14/EEC standards
97 dBa
Sound at operators ear
77 dBa
Vibration at operator
position
.5g (5.17m/s2)
General Conditions: Sunny
Temperature: 71oF (21.7oC)
Wind Speed: 4 mph (6.4 kmh)
Wind Direction: North
Humidity: 90%
Barometric Pressure: 29.94”Hg (760.5 mm Hg)
General Conditions: Sunny
Temperature: 71oF (21.7oC)
Wind Speed: 4 mph (6.4 kmh)
Wind Direction: North
Humidity: 90%
Barometric Pressure: 29.94”Hg (760.5 mm Hg)
97 dB
Specifications
LB351
SOUND
Sound tests were conducted in accordance with 2000/14/EEC, and were performed on 6-17-2013 under the conditions listed below.
Sound power level listed is the highest value for any model covered in this manual. Please refer to serial plate on the unit for the sound
power level for your model.
SOUND LEVEL 77.5 dB(a) at Operator Ear
VIBRATION DATA
VIBRATION LEVEL .5g (5.17m/s2)
Vibration levels at the operator’s handles were measured in the vertical, lateral and longitudinal directions using calibrated vibration test
equipment. Tests were performed on 6-17-13 under the conditions listed below.
Part No 901015 Form No F051513A
Loading...