Billionton Systems MIWLRP1 OEM manual

802.11b Wireless miniPCI Module

Wireless LAN Mini PCI Adapter

User’s Manual

1. Introduction

The MIWLRP is designed to provide Wireless LAN finction on a MiniCPI Type IIIB form factor which is
for built-in Notebook PCs. The function is based on Realteck RTL8180L chipset, which implements the full
IEEE802.11b standard data rates up to 11 Mbps.

2. Features

- Realtek RTL8180L MAC/BBP with Philips SA2400A transceiver and SA2411 power amplifier

- IEEE802.11 Direct Sequence Spread Spetrum (DSSS)

- IEEE802.11 Standard Data Rates: 1, 2, 5.5 and 11 Mbps.

- Full implementation of the MAC protocol specified in IEE Standard of 802.11-1999 and 802.11b.

- Internal encryption engine executes IEEE 802.11 WEP

- 128-bit WEP encryption, backward compatible with 64-bit solution

- Support BSS and IBSS operation under Distributed Coordination Function (DCF) and Ponit

Coordination Function (PCF)

- Two antenna connectors

3. Specification

3.1 Interface:

- IEEE 802.11b compliant

- PCI Bus interface specification 2.2

- MiniPCI specification 1.0

3.2 Mechanical

Dimension: 42.45 x 59.75 x 4.8 mm (L x W x H)

4. Environmental Operating Ranges

- Operating Temperature : 0 ~70° C , Humidity 10 ~ 90%

- Storage Temperature : -20 ~90° C, Humidity 10 ~ 90%

5. Power Consumption

285 m A

9.Drivers support

Microsoft Windows 98SE, Windows ME/2000 /XP,

10.Drivers installation

*Windows 98SE/Me/2000/XP:

The following installation operates under Windows 2000. Procedures will be the same for Windows 98SE/Me/XP.

I. Install the Driver and Utility

A. Insert the CD into the CD-ROM device and execute the " setup.exe" program. The InstallShield Wizard box w ill a ppear, click

"Next" to continue.

B. Follow the instruction of the installation program. The program will install the software for this device directly.
C. Click "Finish" to complete the installation.

After completing the Driver adn Utility installation, a new icon will be displayed in the system tray at the bottom of the

D.

screen. Click the icon and start using the WLAN MiniPCI Adapter.