Billionton Systems GMHSBTAT User Manual

Home Stereo Audio Gateway

Product Layout

Front View

Quick Guide

Rear View

1

Instruction:

Bluetooth Home Audio Gateway (We’ll call that as “Audio Gateway” on the below) allows
you to connect your music with your Bluetooth headset, home stereo system or to receive
the audio from other device. The Audio Gateway is compatible with any stereo, A/V,
portable audio or music enabled mobile device that supports 3.5mm stereo transmission or
receive of audio.

Specification:

z Main Chipset: CSR BC03
z Bluetooth v1.2 compliant, Class 1 Radio
z Support profile : A2DP
z Power: Mini USB adapter (5V/500mA)

Features:

z Wireless communication within a radius of 320 Feet (100 Meters) for Class 1 Bluetooth

device.

z No software installation required, plug and play right out of the box
z 2 LED indicates connection and activity
z When power on the unit will automatic search and paring with latest pared device as

the priority.

z 3.5mm Audio jack input and 3.5mm audio output jack capabilities

Radio Characteristics:

z RF output:7.7 dBm (Max)
z Sensitivity:-86dBm
z Range: 100 meters

(conductive dipole antenna:2 dBi )

Switching the mode of the home audio gateway:

Before using the home audio gateway, please check the position of the switching on the left
side of the home audio gateway, it will set the mode of the home audio gateway or power
the home audio gateway off.

RX → Receiver mode

TX → Transmitter mode
OFF → Power off

Left side View

2

LED Indicator (Tx mode--Audio Transmitter )

LED Indicator

LED Indicator 1 (Green) LED Indicator 2 (Blue)

Action
Connecting to the last paired device

Pairing / Searching
Connecting and streaming
Idle Mode

On On

Flashing Flashing

X On
X X

LED Indicator (Rx mode--Audio Receiver )

LED Indicator

LED Indicator 1 (Green) LED Indicator 2 (Blue)

Action
Pairing / Searching

Connecting and streaming
Idle Mode

Flashing Flashing

On X

X X

Top View

Before using your Audio Gateway

Before using your Audio Gateway, Please check the mode switch on the Audio Gateway,
the switch could switch the mode on the Audio Gateway and power On/Off, you must
connect the AC/DC power adapter, select the mode to power it on, If you want to switch the
audio gateway to another mode or re-pair the Audio Gateway (on Transmitter mode), please
switch it to the middle location to power the Audio Gateway off then switch the mode of you
want again.

3