Audio Receiver
Quick Guide
Product shape
Operating Instructions
1. Ensure that your stereo system is power off.
2. Plug the BT receiver into your home stereo system either by using the
included stereo cable or a standard 3.5 mm male audio cable. Plug the
AC/DC power adapter(included) into both the BT receiver and AC/DC
outlet and press the power button. The blue Status LED on the top will
being blinking.
3. Power on your home stereo system and select the audio channel input
that the BT receiver is connected to.
Bluetooth Audio Receiver LED Indicator
Mode
LED Indicator
Pin Code: 0000
*If Audio Receiver does not initiate any connection when power on; it simply
sits and waits for other devices’ connection. LED indicates in Red/Blue
alternate flash.
Pairing in process Connecting
Red and blue illuminating
Blue flashing twice
every 3 seconds
Troubleshooting
Receiver is not power on.
z Ensure that the BT receiver power switch is in the ON position.
Ensure that the AC/DC power adapter is connected into wall socket
and that the plug is properly inserted into the BT receiver’s power
jack.
After connecting the Receiver, there is no sound.
z Make sure the audio cable is correctly plugged into the back of the
BT receiver as well as to the back of the stereo system.
z Ensure the stereo system is set to the correct input channel.
There is more than one Bluetooth transmitter in the same room or range.
z The Bluetooth receiver will pair with the Bluetooth transmitter that
was turned on first or is the closest in proximity to the receiver. If you
are paired with incorrect transmitter, turn off the power on the
transmitter that will not be used.
Loading...