Billionton Systems GMHSBTAD Users Manual

Audio Transmitter

Quick Guide

Product shape

Connecting my Audio Transmitter

1. Insert the plug on the top of the Audio Transmitter into the line out of the device.

2. Press the unit until it is firmly attached..

3. For iPod mini user, slide the iPod hook on the Audio Transmitter for the greatest stability

after the connection. The iPod Hook may be removed if unwanted.

.

1

Audio Transmitter LED Indicator

Mode

Low Power Searching Pairing in process Connecting Charging

LED

Indicator

Red flashing

Red and blue

flashing

alternatively

Red and blue

illuminating

.Blue flashing

every 4

seconds

Red

illuminating

Pairing with Bluetooth headset device

Before using your Audio Transmitter for the first time, charge battery, you must pair it with a
Bluetooth enabled headset prior to usage. The “Pairing” process creates a unique wi reless
link between two devices. Once paired the communications between the paired devices
does not need any further authentication or authorization.
Please follow the instruction below to pair the Audio Transmitter with a Bluetooth ena bled
headset:

1. Follow the operating instructions that came with your Bluetooth headset to initiate the
pairing process.

2. After powering on the Audio Transmitter, it enters the pairing mode automatically with the

“Pairing LED indicator” flashing red and blue and wa iting to be paired with another
Bluetooth headset for 3 minutes.

3. Once pairing is successful between the Audio Transmitter and the Bluetooth headset, the

Audio Transmitter will exit the pairing mode with the “Pairing LED indicator” blinking blue
every 5 seconds and will be ready to use.

＊Note: Audio transmitter will remember the last paired device its memory. Upon re-startup,

it will search for the last paired device (red and blue LED illuminating).
Note: To re-pair the Audio Transmitter with another device, press and hold the Pairing

＊

Button for 3 seconds to enter the searching and pairing mode.

Charging battery

You may charge the Li-ion battery inside the Audio Transmitter by using the mini USB
cable. While charging takes effect, the charging LED remains on. The LED turns off when
the battery is fully charged. Battery charging will not affect the functionality of the Audio
Transmitter.

1. Plug the USB cable into the mini USB port of the Audio Transmitter and plug the other
end into your computer’s USB port.

2. When charging, the red LED will remain lit.

3. The LED will turn off after the battery is fully charged.

4.

Remove the USB cable from the Audio Transmitter’s mini USB port.

Note: Please charge approximately 2.5 hours before initial use.

＊

2