Billion Electric Company ISDN TA128s User Manual
tiny USB ISDN TA128
Quick Start Guide
This product is designed for the ISDN with Basic Rate Interface.
For more detailed instructions on configuring and
using the device, please refer to the on-line manual
in the installation CD.
Package Contents
• One tiny USB ISDN TA128 with USB cable built-in
• One tiny USB ISDN TA128 installation CD with drivers
and utility software
• One CD with bundled application software programs
(optional)
Quick Start Guide
One RJ-45 ISDN cable
•
• This quick start guide
The Front Panel LEDs
LED Meaning
USB When this LED is lit, it indicates that the USB port
is connected to the PC and working properly.
ISDN
B1 When this LED is lit, it indicates that the ISDN B1
When this LED is lit, it indicates that the ISDN
bus is activated. It will flash when there is message
transfer in the D channel.
channel is being accessed. It will flash when there
S
0
is data transfer in the B1.
B2 When this LED is lit, it indicates that the ISDN B2
channel is being accessed. It will flash when there
is data transfer in the B2.
1
tiny USB ISDN TA128
Installing the tiny USB ISDN TA128
Connect your ISDN line to the ISDN S0 RJ-45 jack. Connect the USB
cable to the USB port and connect the other end to the PC. Refer to the
following figure.
For Windows 98:
1. Start Windows. After the opening banner, Windows will
tell you that the new device has been detected. You will
then see the following screen. Click “Next >”.
2
Quick Start Guide
2. In the next window, select “Search for the best driver for your
device” and click “Next >”.
3. Insert the installation CD into the CD-ROM drive and
check “C
D-ROM drive” in the next window.
4. Continue through the Wizard, clicking the “
buttons. Windows will start copying files to your system.
You will see the following screen prompting for the path
of the Windows source files. Please specify a location.
Click “OK”. Then, click “Finish” in the next window to end
the installation.
Next >
”
3
Loading...