Billion Electric Company BiPAC-221 User Manual
BIPAC-221
USB ISDN TA with 2 Analog Ports
Quick Start Guide
This product is designed for the ISDN with Basic Rate Interface.
Quick Start Guide
Package Contents
• One external USB ISDN TA with 2 analog ports
One installation CD with drivers and utility software
•
• One CD with bundled application software programs (optional)
• One RJ-45 ISDN cable
One USB cable
•
• One power adapter
This Quick Start Guide
•
The Front Panel LEDs
MIC SPK
PWR B1 B2
1 2
PCRUN USB
LED Meaning
PWR When lit, it indicates the power adapter is connected.
RUN
USB
ISDN When lit, it indicates that the ISDN S0 bus is activated.
B1
B2
Flashes periodically to indicate that the USB ISDN TA
is working properly.
When lit, it indicates the USB port is connected to the
PC. When flashing, it indicat es the USB is on download
status.
When lit, it indicates that the ISDN “B1” channel is
being accessed. It will flash during data transfer.
When lit, it indicates that the ISDN “B2” channel is
being accessed. It will flash during data transfer.
Phone 1
Phone 2
PC
When lit, it indicates that the analog device connected to
the Phone 1 port is in use.
When lit, it indicates that the analog device connected to
the Phone 2 port is in use.
When lit, it indicates that at least one application
program running on the PC is using the USB ISDN TA.
1
Billion BIPAC-221
Installing the BIPAC-221
ISDN S0
Power jack USB port Phone ports
RJ-45 jack
POWER
USB
IS DN S.
1. Connect the external power adapter to the power jack. All
the LEDs light and then go off one by one, except that the
PWR LED will still light.
2. Connect your ISDN line to the ISDN S
RJ-45 jack.
0
3. Connect your analog telephone and/or G3 fax machine to
the phone ports.
4. Connect a headset to the “MIC/SPK” jacks.
5. Connect the USB cable to the USB port and connect the
other end to the PC.
For Windows 98:
1. Start Windows. After the opening banner, Windows will
tell you that the new device has been detected. You will
then see the following screen. Click “
Next >
”.
2
Quick Start Guide
2. In the next window, select “Search for the best driver for your
device” and click “Next >”.
3. Insert the installation CD into the CD-ROM drive and
check “C
D-ROM drive” in the next window.
4. Continue through the Wizard, clicking the “
buttons. Windows will start copying files to your system.
You will see the following screen prompting for the path
of the Windows source files. Please specify a location.
Click “OK”. Then, click “Finish” in the next window to end
the installation.
Next >
”
3
Loading...