Page 1
MyNetFone Configuration Guide
Billion BiPAC 7401VGP R3
Contents
1. Physical Setup ....................................................................................2
2. GUI Login...........................................................................................2
3. Quick Start ......................................................................................... 2
4. WAN Setup.........................................................................................3
5. Wireless Setup .................................................................................... 3
6. VoIP Setup ......................................................................................... 4
7. Completion.........................................................................................4
My Net Fone Australia Pty Ltd www.mynetfone.com.au Level 2, 10-14 Waterloo St, Surry Hills NSW 2010
Page 1 of 4
Page 2
1. Physical Setup
• Connect the supplied power pack, Ethernet cable and ADSL line to the BiPAC
7401VGP R3.
• Ensure the Ethernet cable is plugged into both the network card on your PC
and into one of four Ethernet ports on the VoIP device. The ADSL line is must
be connected to an appropriate splitter or directly into an ADSL compatible
wall socket.
• Power up the device.
2. GUI Login
The 7401VGP R3 is configured using your web browser. Navigate to
http://192.168.1.254 to access the device Web GUI.
Username: admin
Password: admin
3. Quick Start
Select ‘Quick Start’ from the side menu and then choose the ‘Auto’ option. Click
‘Apply’.
My Net Fone Australia Pty Ltd www.mynetfone.com.au Level 2, 10-14 Waterloo St, Surry Hills NSW 2010
Page 2 of 4
Page 3
4. WAN Setup
Once the scan has completed, enter your ADSL username and password (as provided by
your internet service provider). Click ‘Apply’.
5. Wireless Setup
For security reasons it is advisable to disable your Wireless LAN when not in use and to
ensure security is always enabled.
If you would like to disable the wireless LAN, select ‘Disable’ under ‘WLAN Service’,.
Otherwise, to create a secured wireless network, carry out the following steps (see
diagram next on page):
• Enter an ESSID to uniquely identify your wireless network
• Select WPA2-PSK as your Security mode
• Enter a unique WPA Shared key. Please keep this key in a safe place as
anyone with access to this key will be able to gain access to your network
• Click ‘Apply’
My Net Fone Australia Pty Ltd www.mynetfone.com.au Level 2, 10-14 Waterloo St, Surry Hills NSW 2010
Page 3 of 4
Page 4
6. VoIP Setup
In this section of the setup process, enter your MyNetFone account details as provided
by your welcome email.
• Under SIP Service Provider, select MyNetFone
• Enter your provided MyNetFone Number into the both the Phone Number
and Username fields
• Enter your supplied MyNetFone Password into the Password field
• Enter a Display Name of your choice
• Hit ‘Apply’
7. Completion
Wait for a few seconds for the device to save configuration details to FLASH and reboot.
Your device has now been configured for use with MyNetFone.
My Net Fone Australia Pty Ltd www.mynetfone.com.au Level 2, 10-14 Waterloo St, Surry Hills NSW 2010
Page 4 of 4
Loading...