Billion BiPAC 2060 Quick Start Guide

BIPAC-2060

Powerline / 14Mbp s Ethernet Adapter

QUICK START GUIDE

PREFACE

This document describes installation of Billion BIPAC-2060.
Please read this document before installing the product.

TO THE INSTALLER

This publication contains the following sections:

 Important safety instructions
 The first thing you need to know before you begin to install

 Product installation guide

 Hardware and software installation
 To uninstall

 Advanced setup

 Advanced security setup

IMPORTANT SAFETY INSTRUCTIONS

This product is intended for connection to the AC power line. For installation instructions, refer to the Installation
section. For removing the device, refer to the Unplug section. The following precautions should be taken when usin g
this product.

 Please read all instructions before installing and operating this product.
 Please keep all instructions for later reference.
 Please follow all warnings and instructions marked on the product.
 Unplug the AC coupler from the wall outlet before cleaning. Use a damp cloth for cleaning. DO NOT

use liquid cleaners or aerosol cleaners

 DO NOT operate this product near water.

 This product should never be placed near or over a radiator, or heat register.
 This product relies on the building’s electrical installation for short-circuit (over current) protection.
 Ensure that a fuse or circuit breaker no larger than 120 VAC 15A or 240 VAC 6A is used on the phase

conductors (all current-carrying conductors).

 DO NOT allow anything to rest on the product interconnect cords. DO NOT locate this product where people

may walk on the cords.

 Because the product sends data over the powerline, it is recommended that you plug directly into a power

outlet. Do not plug the device into a UPS or power strip with surge protection. BIPAC-2060 has its own power
filter for protection against surges.

 Only a qualified technician should service this product. Opening or removing covers may result in exposure to

dangerous voltage points or other risks.

 Unplug the AC coupler from the wall outlet and refer the product to qualified service personnel for the following

conditions:

.

 When the interconnect cords are damaged or frayed.

If liquid has been spilled into the product.



If the product has been exposed to rain or water.



If the product does not operate normally when the operating instructions are followed.



If the product exhibits a distinct change in performance.

