Billion BiGuard 50G Quick Start Guide

21

THE BiGuard 50G

2

CONNECTING THE BiGuard 50G

OOuutt ooff BBooxx

Carefully unpack the BiGuard 50G and
check that the following items are in­cluded.

1. BiGuard 50G x 1

2. Power adapter x 1

3. Warranty card x 1

4. Software CD x 1

5. Ethernet cable x 1

6. Quick Start Guide x 1

FFrroonntt aanndd RReeaarr VViieeww

1. Power LED

2. Status LED

3. LAN 1~4 LEDs,

4. WAN 1 & 2 LED

5. 10/100 LED

6. LINK/ACT LED

7. Wireless Antenna

8. WAN 1 & 2 RJ-45 connector

9. LAN 1~4 RJ-45 connectors

10. RESET button

11. DC 12V connector

NNOOTTEE:

Ensure that the BiGuard 50G is
turned off before beginning
setup.

:

Ensure that your hardware is pow-

A.

ered off, including the BiGuard 50G.

Connect an RJ-45 Ethernet cable

B.

to the WAN port on the BiGuard
50G, connect the other end to an
ADSL or cable modem or another
router.

Connect switches, hubs, and

C.

servers to the LAN ports on the
BiGuard 50G.

Connect the power adapter cable to

D.

the DC 12V connector on the
BiGuard 50G. Connect the power
adapter to an electrical outlet.

After the power is connected. The

E.

LEDs will all blink and after a
couple of seconds LEDs will all
blink again. Soon after the status
LED light will turn off and BiGuard
50G will be ready for operation.

LLooggggiinngg IInn

You can configure and manage the
BiGuard 50G with the Web Manager.
The Web Manager is a web-based inter­face that you can access from any web
browser.

In the Address field of your Web

A.

browser, type the default IP
address: “192.168.1.254”

23

CONFIGURING THE WAN

A Security Alert screen appears.

B.

Click Yes to continue. The login
screen appears.

Type the default user name and

C.

password:

User Name: admin
Password: admin

Then click OK. The Web Manager
opens on the Status menu.

CCoonnffiigguurriinngg tthhee WWAANN ffoorr PPPPPPooEE

To configure the WAN for PPPoE, you
need the following information from your
ISP provider and since BiGuard 50G is
Dual WAN, you can choose either WAN1
or WAN2 to complete the following setup:

User name
Password
DNS (if necessary)

(contact your ISP for more information)

Click Quick Start in the Menu bar.

A.

Click Quick Star WAN1 or WAN2.

B.

The Quick Start WAN screen opens.

Select PPPoE

C.

drop-down menu.

Type the user name in the User-

D.

name field.

Type and confirm the password in

E.

the Password and Retype Pass-
word fields.

from the Protocol

Select Always On or Connect on

F.

Demand from the Connection
drop-down menu. If you select

Connect on Demand, the following
Idle Timeout field will become

available.

Type the number (of minutes) in the

G.

Idle Timeout field. If your connec­tion is Connect on Demand, you
are disconnected after the idle
timeout period.

Click Apply to confirm the settings.

H.

CCoonnffiigguurriinngg tthhee WWAANN ffoorr SSttaattiicc IIPP

To configure the WAN for static IP, you
will need the following information from
your ISP provider. You can set up to 4
static IPs all at once

IP address
Subnet mask
Gateway
DNS

Click Quick Start in the Menu bar.

A.

Click WAN. The Quick Start WAN

B.

screen opens.

Select Static IP from the Protocol

C.

drop-down menu.

D.

Type the IP address in the IP as-
signed by your ISP field.

A

Type the subnet mask in the IP

E.

Subnet Mask field.

Type the gateway in the ISP Gate-

F.

way Address field.

Type the primary/secondary DNS in

G.

the Primary DNS and Secondary
DNS fields.

Click Apply to confirm the settings.

H.

CCoonnffiigguurriinngg tthhee WWAANN ffoorr DDHHCCPP

Click Quick Start in the Menu bar.

.

Click WAN. The Quick Start WAN

B.

screen appears.

Select Obtain an IP Address

C.

Automatically from the Protocol
drop-down menu.

Check Obtain DNS Automatically

D.

if your ISP provides this with the
assigned IP. Otherwise, enter the
Primary and Secondary DNS pro­vided by your ISP.

Click Apply to confirm the settings.

E.

Congratulations. You successfully

F.

finished the BiGuard 50G router
configuration.