Page 1
B-5000 Sparkling Specification Sheet
The
chilled
S
The CO2 injection system used in the
of CO2 in the
water is high which means it has a better life and, consequently, taste.
Adjustable
Adjust the level of sparkling to suit your taste. With adjustable controls up to 5 bar of CO2 pressure,
this offers the world’s best carbonat
Adjustable chilled temperature
A simple adjustable control knob allows the chilled water temperature to be raised or lowered for
chilled
Safety first
Billi’s SplashFree boiling water delivery electronically varies the water flow, slowing momentarily
to eliminate splashing as the water first enters the cup. All Billi dispensers are supplied standard
with a safety switch.
Cupboard fitment options
The
is supplied as two modules enabling multiple cupboard fitment
options to maximise the use and efficiency of your cupboard space.
Instant filtered
boiling, chilled
B-5000 Sparkling system the ultimate drinking water appliance which delivers boiling,
& professional sparkling filtered water instantly. It delivers the following benefits:
aturated sparkling system
Billi Sparkling range ensures the saturation
sparkling water
ion system.
and refreshing drinks.
Billi B-5000 Sparkling range
& sparkling
water.
Page 2
B-5000 Sparkling Specification Sheet
Product
Number
Description
Suggested no. of
Chilled &
sparkling
cups / hour
Boiling
cups /
hour
Total current
Unit
Height
(mm)
Unit
Width
(mm)
Unit
Depth
(mm)
915110LCH
B-5000 Sparkling Chrome
Levered Tap
Family use
60 90
C&S
Boiling
385
340
240
180
325
360
Water Supply
Filtration
Certifications
without notice.
Specifications and guide to standard model selection
Please note: The B-5000 Sparkling consists of two modules, the Chilled and Sparkling (C&S) module, and the Boiling module.
A single 15mm (1/2”) stop-tap with a male
thread should be installed in an easily
accessible position. Water supply must be
microbiologically safe to drink, with a
minimum dynamic water pressure of
250kPa to a maximum of 1200kPa.
Electrical installation requirements
The B-5000 Sparkling consists of two
modules and both require their own
standard 10 amp power outlet. It is
supplied with a 1 metre flex cord and plug.
CO2 Gas Cylinder
The CO2 gas cylinder supplied must be
secured in a suitable location. Each
cylinder contains 600g of CO2 and should
be installed in a well-ventilated area. Each
cylinder will provide between 200-350L of
sparkling water depending on the unit
settings. The MSDS is available on
www.billi.com.au for a complete list of
specifications and warnings.
Replacements are available from Billi.
Warranty
The Sparkling range is covered by a
comprehensive 2 year warranty on all
parts and labour.
Technical Advice
Contact Billi Pty Ltd on 1800 812 321
persons
Billi have partnered with globally
recognised brand Pentair Everpure to
create the most technologically
advanced filtration for instant boiling and
chilled filtered water systems. It
removes sediment and chemicals, allows
the flow of minerals through without
scale build up and suppresses harmful
bacteria in the water. Due to the unique
Fibredyne™ technology, our filters have
a longer life, higher flow rate and lower
pressure drop, leaving you with healthy
fresh water. All Billi cartridges are
certified by global public safety agency
NSF International.
Filter changes are made simple by our
swing-change system and replacement
cartridges are available online at
www.billi.com.au. Optional sub micron
filters are available.
Options and accessories
Dispenser Styles: The B-5000 Sparkling
is supplied with a standard XL levered
dispenser.
Billi Font: Allows the dispenser to be
located away from sink areas.
Finished in polished Stainless Steel,
optional Brushed Chrome, Gloss Black or
Matte Black finish available.
Dispenser Riser: 70mm dispenser
extension - supplied standard with the
draw amps
2 x 10
Every Billi drinking water appliance is
manufactured under a certified quality
control system. The Billi B-5000 models
have been tested and comply with all
required standards including: Watermark
Licence Number 21525; Tested to;
AS3498 and AS/NZS4020; Victorian
Electrical Safety Act 1998 Approval
Number CS100600V, AS/NZS ISO 9002;
AS1428 Accessibility Design
Requirements; Section J6 of the BCA;
Certificate Number QEC 11627; C-Tick
approved.
Install Diagram
Billi Font.
Billi Pty Ltd
42 Lucknow Crescent, Thomastown
Victoria, 3074 Australia
Telephone + 613 9469 0400
Facsimile + 613 9469 0499
Website www.billi.com.au
Designed and manufactured in Australia
As Billi Pty Ltd has a policy of continual
improvement, all details are subject to change
All goods sold are subject to our standard
terms and conditions. 1016
Loading...