Page 1
B-3000 Sparkling Specification Sheet
The
chilled
and sparkling
S
The CO
in the water
is high which means it has
Adjustable
Adjust the level o
Adjustable chilled temperature
The new Billi sparkling models have an improved
A simple
adjustable control knob allows the chilled water temperature to be
refreshing drinks
New Ice Bank technology f
Our Ice bank technology has a chilled reservoir where both sparkling and chilled water supply passes
through. In doing so, the dispensed water temperature is consistently chilled
a higher
level of carbonation.
Improved performance
Packaging to include CO
Instant chilled &
Dual Levered Slimline in Chrome
B-3000 Sparkling system is a filtered chilled & sparkling water system which provides
water instantly. It delivers the following benefits:
aturated sparkling system
injection system used in the Billi Sparkling range ensures the saturation of CO
2
a better life and, consequently, taste.
sparkling water
f sparkling to suit your taste with adjustable controls up to 5 bar of CO2 pressure.
.
or chilled and sparkling water
, increased cup capacity from 60 cups to 100 cups & 120 cups to 200 cups.
canister.
2
sparkling filtered
water
chilling capacity & recovery time.
2
raised or lowered for chilled and
, also providing
Page 2
B-3000 Sparkling Specification Sheet
Product
Number
Description
Suggested no.
of persons
Delivery cups
/ hour
Power
required
(amps)
Unit
Height
(mm)
Unit
Width
(mm)
Unit
Depth
(mm)
913100
B
20 100 10 410 255 420
Electrical installation requirements
Filtration
Accessibility Design Requirements;
Preferred installation layout
Dual Levered Slimline tap dimensions
without notice.
Specifications and guide to standard model selection
DCH
-3000 Sparkling
The B-3000 Sparkling requires a standard 10
amp AU power outlet. It is supplied with a 1
metre flex cord and plug.
Water supply
A single 15mm (1/2”) BSP stop-tap with a
male thread + position. Water supply must
be microbiologically safe to drink, with a
minimum dynamic water pressure of
250kPa to a maximum of 1000kPa.
CO
Gas Cylinder
2
The CO
gas cylinder supplied must be
2
secured in a suitable location. Each cylinder
contains 1100g of CO
and should be
2
installed in a well ventilated area. Each
cylinder will provide between 200-350L of
sparkling water depending on the unit
settings. The MSDS is available on
www.billi.com.au
for a complete list of
specifications and warnings. Replacement
gas cylinders are available from Billi.
Warranty
The Sparkling range is covered by a
comprehensive 2 year warranty on all parts
and labour.
Technical Advice
Contact Billi Pty Ltd on 1800 812 321
Refer to installation guide for full details
including ventilation requirements.
Billi have partnered with globally
recognised brand Pentair Everpure to
create the most technologically advanced
filtration for instant boiling and chilled
filtered water systems. It removes
sediment and chemicals, allows the flow
of minerals through without scale build up
and suppresses harmful bacteria in the
water. Due to the unique Fibredyne™
technology, our filters have a longer life,
higher flow rate and lower pressure drop,
leaving you with healthy fresh water. All
Billi cartridges are certified by NSF
International.
Filter changes are made simple by our
swing-change system and replacement
cartridges are available online at
www.billi.com.au
. Optional sub micron
filters are available.
Certifications
Every Billi drinking water appliance is
manufactured under a certified quality
control system. Billi Sparkling models
have been tested and comply with all
required standards including: Watermark
License Number 022690; Tested to;
ATS5200.105 and AS/NZS4020; AS1428
ISO9001 Certificate Number QEC 11627.
Billi Pty Ltd
42 Lucknow Crescent, Thomastown
Victoria, 3074 Australia
Telephone + 613 9469 0400
Facsimile + 613 9469 0499
Website www.billi.com.au
Designed and manufactured in Australia
As Billi Pty Ltd has a policy of continual
improvement, all details are subject to change
All goods sold are subject to our standard
terms and conditions. 0217
Loading...