Billi 913000RBR, 913000RCH, 913000RMB, 913000RMW, 913000RUB Installation Guide

Installation guide
Billi B-3000

Installation
requirements.

Components for B-3000

Before commencing installation,
ensure you have identified the following.

1. Chilled Water Module

2. Installation Requirements

3. Installation Hardware and Dispenser

4. Warranty

Water Supply

A single cold water supply is required.

Supply Pressure: 200 – 1000 Kpa
Supply Temperature: 5°C – 30°C

Do not install with water that is
microbiologically unsafe or with water of
unknown quality without adequate disinfection
before or after the system. Systems certified
for cyst reduction may be used on disinfected
water that may contain filterable cysts.

Power Requirements

A single 10 amp standard power outlet is
required. Chiller module is supplied with
1 metre of flex cord and plug.

Power
Outlet

Cupboard Dimensions:
220mm Minimum Width
365mm Minimum Depth

Stop Tap
(Installed by Plumber)
Max 450mm from Unit

800mm

Tube Length

Supplied

Diagram 1

Drainage

A drainage point, such as a dishwasher nipple
or a tundish, is required.

233mm

37mm

113mm

bench
thickness
1mm-37mm

Diagram 2

2