Billi 904020LCH, 901000TCH Specifications Sheet
Eco & Quadra Specification Sheet
Lowest Energy Consumption
Billi’s unique energy reclaim systems recovers waste heat energy generated by chilling water and
reuses the energy to preheat the boiling water, thereby saving energy. By considering composition
and construction of each component to every unit Billi achieves Australia’s lowest carbon foot print.
The Standby mode also conserves power by powering down after 2 h
Smallest under bench footprint with largest capacities
With a focus on space saving, Billi systems are often less than half the size of comparative products,
allowing you to make the most of the available area, while offering the largest capacities available in
the market.
Water cooled or air cooled options
Billi are the only manufacturer to offer both water
cooled
systems
e technology
ensures water usage is absolutely minimal. Billi’s air cooled option generates far less heat than
traditional air cooled systems.
No cupboard ventilation required
The Billi Quadra water
. The Billi Eco
being the only air cooled unit available that doesn’t require cupboard ventilation.
Safety first
Billi Eco SplashFree boiling water delivery electronically varies the water flow, slowing momentarily
to eliminate splashing as the water first enters the cup. All Billi dispensers are supplied standard
with a safety switch.
Adjustable chilled temperature
A simple adjustable control knob allows the chilled water temperature to be raised to 15 C or lowered
to 6 C for perfectly chilled, refreshing drinks, with your required temperature being quickly reached
and maintained
Choice of Styles
Billi
e available with a choice of XL Levered, XT Touch & XR Remote dispenser
styles in a range of finish options including Chrome, Matte Black, Matte White & Rose Gold.
Australian designed, manufactured and owned.
Instant boiling &
XR Remote in Chrome
Product code on page 2 from L to R
XT Touch in Chrome
Product code on page 2 from L to T
XL Levered on font in Chrome
* To order a touch tap change
* To order a touch tap change
are more energy efficient than our air cooled systems. Billi’s heat exchang
cooled units do not require cupboard ventilation or a cooling fan
Eco & Quadra units ar
chilled filtered
drinking water
systems
ours of non use.
-cooled and air-cooled options. Our Water-
Eco & Quadra Specification Sheet
Product
Code
Model
Initial cup
delivery
suggested no.
persons
Boiling water
delivery
cups per hour
Chilled water
delivery
cups per hour
Current
required
amps
Height
mm
Width
mm
Depth
Water
cooled
mm
Depth
Aircooled*
mm
901000LCH
Eco
10 90 60 10 340 180 — 500 904010LCH
Quadra Compact
100 150 10 340 315 365 410 904020LCH
Quadra 420
24 120 175 10 340 315 465 510 904040LCH
Quadra 440
40 150 175 10 340 315 465 510 904060LCH
Quadra 460
60 180 175 10 340 315 465 510 904100LCH
Quadra 4100
100 250 175 15 340 315 465 510 904180LCH
Quadra 4180
180 350 175 20 340 315 465 510
Please note: All Models come in a range of dispenser options and finishes. The codes shown on this table are for XL Dispenser in Chrome only.
You can view the options
Power supply
Certifications
Installation layout
1 cup = 17 0ml. Based on the initial number of cups of
Specifications and guide to standard model selection
XL Chrome
and Product Codes here: http://billi.com.au/wp-content/uploads/2015/08/Billi-Product-Selection-Guide_0217.pdf
XL Chrome 20
XL Chrome
XL Chrome
XL Chrome
XL Chrome
XL Chrome
The Billi Eco, Quadra Compact, 420, 440,
and 460 models requires a standard 10
amp AU power outlet. It is supplied with a 1
metre flex cord and plug. The Quadra 4100
model requires a 15 Amp AU power outlet
while the Quadra 4180 requires a 20 Amp
AU power outlet. All models are supplied
with a 1 metre flex cord and plug.
Water supply
A single 15mm (1/2”) stop-tap with a male
thread should be installed in an easily
accessible position. Water supply must be
microbiologically safe to drink, with a
minimum dynamic water pressure of
250kPa.
Filtration
Billi have partnered with globally
recognised brand Pentair Everpure to
create the most technologically advanced
filtration for instant boiling and chilled
filtered water systems. It removes
sediment and chemicals, allows the flow of
minerals through without scale build up and
suppresses harmful bacteria in the water.
Due to the unique Fibredyne™ technology,
our filters have a longer life, higher flow rate
and lower pressure drop, leaving you with
healthy fresh water. All Billi cartridges are
certified by NSF International.
Filter changes are made simple by our
swing-change system and replacement
cartridges are available online at
www.billi.com.au
. Optional sub micron
filters are available.
&
of
Every Billi drinking water appliance is
manufactured under a certified quality
control system. The Billi Eco & Quadra
models have been tested and complies
with all required standards including:
Watermark License Number 21525;
Certified to; AS3498 and AS/NZS4020;
ISO 9001; AS1428 Accessibility Design
Requirements; Section J6 of the BCA;
Certificate Number QEC 11627.
Warranty
All components of the Billi units are
covered by a 24 month warranty. Filter
cartridges are a consumable and are not
covered by warranty, as water conditions
and usage vary. All Billi units are covered
by a 5 year warranty on the boiling water
tanks.
Technical Advice
Contact Billi Pty Ltd on 1800 812 321
boiling water immediately available, drawn one cup
every 10 seconds. Consideration may be needed for
usage patterns and draw-off methods.
*When specifying aircooled models, simply change the
904 to 905 and ad d AC after the descri ption.
-
Billi Pty Ltd
42 Lucknow Crescent, Thomastown
Victoria, 3074 Australia
Telephone + 613 9469 0400
Facsimile + 613 9469 0499
Website www.billi.com.au
Designed and manufactured in Australia
As Billi Pty Ltd has a policy of continual
improvement, all details are subject to change
without notice.
All goods sold are subject to our standard
terms and conditions. 0517
Loading...