Billet Specialties Legacy Dragster Knock-Offs User Manual

KNOCK-OFF INSTALLATION INSTRUCTIONS

1. LIFT WHEEL/TIRE ASSEMBLY ONTO DISC/DRUM AND WHEEL
MOUNTING STUDS.

2. CENTER SPINNER HUB ASSEMBLY OVER WHEEL BOLT CIRCLE; ALIGN
HUB MOUNTING DISC WITH WHEEL MOUNTING STUDS; INSTALL LUG NUTS
AND WASHERS THROUGH HUB MOUNTING DISC AND WHEEL; TIGHTEN.

SPINNER

NOTE: ONLY HAND TIGHTEN SPINNER
OR NUT. USE OF ANY TOOLS WILL
DAMAGE PRODUCT.

NOTE: REVERSE-THREAD HUBS [LEFT HAND THREAD] MOUNT ON
PASSENGER SIDE OF VEHICLE

3. SLIDE LUG COVER OVER SPINNER HUB AND HOLD IN PLACE WHILE
THREADING SPINNER [OR NUT] ONTO HUB UNTIL IT BOTTOMS AGAINST
TOP OF COVER. NOTE: ONLY HAND TIGHTEN SPINNER OR NUT.

USE OF ANY TOOLS WILL DAMAGE PRODUCT.

MAINTENANCE: KEEP THREADS COATED WITH A THIN LAYER OF

ANTI-SEIZE.

TIP: USE A PERMANENT MARKER TO WRITE THE THREAD DIRECTION AND
DRIVER/PASSENGER SIDE ON HUB ASSEMBLY UNDER THE CAP.

NOTE: FOR PROPER FIT USE THE APPROPRIATE BILLET SPECIALTIES LUG
NUT SET FOR YOUR SPECIFIC APPLICATION:
999925
999926
999935
999945
999946

12mm-1.5 Mag Shank
12mm-1.5 Duplex Mag for 5x5 bolt circle
7/16-20 Mag Shank
1/2-20 Mag Shank
1/2-20 Duplex Mag for 5x5 bolt circle

Torque Specs:
12mm
14mm
7/16-20
1/2-20

75-85 ft.lbs.
85-95 ft.lbs.
70-80 ft.lbs.
75-85 ft.lbs.

LUG COVER

HUB ASSEMBLY

LUG NUT

WASHER

WHEEL

BRAKE DISC

Billet Specialties, Inc. 500 Shawmut Avenue La Grange, Illinois 60526 PH 800.245.5382 Fax [phone] www.billetspecialties.com

09/07