Billet Specialties Brake/Clutch Pedal 199360 User Manual
Tools Needed:
• 3/32” drill bit
• 5/16” drill bit
• Spray Adhesive
1. Remove rubber pedal pad
• Center punch
• 7/16” wrench
1967 - 1969 Camaro / Firebird
Brake/Clutch Pedal
#199360 / #199365
CLUTCH OPTIONAL
CLUTCH/
BRAKE
2. Cut out template and apply spray adhesive to the back,
align template with pedal and attach.
3. Center punch the pedal in the center of the appropriate
holes as marked on the template. (Clutch and Brake
require different holes to be drilled).
4. Drill 3/32” pilot holes in each center punch, follow by
drilling with 5/16” drill bit.
5. Install 1/4”-20 socket set screw* in appropriate holes in
billet pedal cover, install billet pedal cover on pedal then
attach washer and lock nut. Tighten firmly by alternating
turns at each nut with 7/16” wrench.
* Extra hardware is provided
CLUTCH/
BRAKE
Due to multiple sources used by the auto
manufacturer, some pedals may have to be
trimmed for the pedal cover to fit properly.
BRAKE
1967 - 1969 Camaro / Firebird
Brake/Clutch Pedal
#199360 / #199365
1.40
Tools Needed:
• 3/32” drill bit
• 5/16” drill bit
• Spray Adhesive
1. Remove rubber pedal pad
2. Cut out template and apply spray adhesive to the back,
align template with pedal and attach.
3. Center punch the pedal in the center of the appropriate
holes as marked on the template. (Clutch and Brake
require different holes to be drilled).
4. Drill 3/32” pilot holes in each center punch, follow by
drilling with 5/16” drill bit.
5. Install 1/4”-20 socket set screw* in appropriate holes in
billet pedal cover, install billet pedal cover on pedal then
attach washer and lock nut. Tighten firmly by alternating
turns at each nut with 7/16” wrench.
* Extra hardware is provided
• Center punch
• 7/16” wrench
CLUTCH OPTIONAL
CLUTCH/
BRAKE
Due to multiple sources used by the auto
manufacturer, some pedals may have to be
trimmed for the pedal cover to fit properly.
BRAKE
CLUTCH/
BRAKE
1.40
Loading...