Bike2Power LightCharge User Manual

User Manual and Installation Guide

Bike2Power™ Bicycle-mounted USB Chargers

LightCharge Smartphone/Lights Bicycle USB Charger for Bottle Dynamo

LightCharge Smartphone/Lights Bicycle USB Charger for Hub Dynamo

ENGLISH

User Manual and Installation Guide

LightCharge® for Bottle Dynamo / LightCharge® for Hub Dynamo

Table of Contents

Copyright .................................................................................................................................. 3

Introduction .............................................................................................................................. 3

Safety Instructions ................................................................................................................... 3

Compatible Devices .................................................................................................................. 4

Parts and Technical Specifications .......................................................................................... 5

Parts ......................................................................................................................................... 5

Technical Specification ............................................................................................................ 5

Output Power ........................................................................................................................... 5

Installation Manual .................................................................................................................. 6

Getting to Know Your LightCharge®

LightCharge .......................................................................................................................... 6

Bottle Dynamo ...................................................................................................................... 7

Dynamo Mounting Bracket.................................................................................................. 7

DynaCap Tire Defender ....................................................................................................... 7

Mounting Dynamo

Required Tools ...................................................................................................................... 8

Mounting ............................................................................................................................... 8

To Remove the Dynamo ....................................................................................................... 9

To Disengage the Dynamo ................................................................................................... 9

................................................................................................................... 7

Mounting LightCharge® USB Charger ................................................................................ 9

Connecting LightCharge to Bicycle Lights and Bottle Dynamo .........................................10

Connectors .......................................................................................................................... 10

Connecting to the dynamo ................................................................................................. 10

Connecting to Bicycle Lights ............................................................................................. 10

Full Installation Diagram .................................................................................................. 11

How to use the DynaCap

....................................................................................................... 11

Connecting LightCharge USB Charger to Bicycle Lights and Hub Dynamo

Disconnecting Lights from Hub Dynamo .......................................................................... 12

Connecting light(s) to LightCharge® ................................................................................ 12

Connecting LightCharge® to dynamo hub ....................................................................... 12

Disconnecting from a standard hub dynamo

Operating LightCharge® ........................................................................................................13

Connecting mobile devices..................................................................................................... 13

Charging mobile devices ........................................................................................................ 13

Switching between charging lights and charging mobile devices ....................................... 14

Taking Care of Your Device ....................................................................................................14

Limited Warranty ....................................................................................................................14

Limitation of Liability .............................................................................................................15

Contact Information ................................................................................................................15

..................................................................................... 6

..................... 11

........................................................................ 13

2 | P a g e

ENGLISH

All brands and product names mentioned herein are the property of their respective

owners.

Introduction

LightCharge® USB Bicycle Charger allows charging USB-chargeable mobile devices and bicycle lights while riding a bicycle. The device is designed to be used with the regular (utility) bicycles.

LightCharge® is compatible with the majority of the smartphones makes and models including Androids® and iPhones®. It is also compatible with USB and dynamo bicycle lights.

LightCharge for hub dynamo is compatible with most common bicycle hub dynamos, while LightCharge for bottle dynamo is compatible with a bottle (side) dynamo.

Charging with LightCharge® begins at as low as walking speeds. Install the device; connect your mobile device to the 2.0 USB charger port using your mobile device USB charging cable; connect bicycle lights to a designated LightCharge® connector and begin pedaling.

Read this guide carefully before installing and using LightCharge®. Review the user guide for your bicycle, mobile device, bicycle lights, and hub dynamo before installing the LightCharge® and connecting your chargeable devices.

Safety Instructions

(!) CAUTION

Obey your local laws. Always keep your hands free to operate the bicycle while cycling. Road safety must be your first concern while cycling. Do not attempt to make or receive calls, or operate your mobile device while cycling. Do not attempt to connect your mobile device or lights to the charger while cycling. Always stop to initiate, modify, or terminate any function on your mobile device and lights or to connect your mobile device and lights to the charger.

Only operate LightCharge® if it is safe under the cycling conditions. Do not attempt to remove or adjust any portion of LightCharge® while cycling. Always stop and loosen the mounting mechanisms to adjust any portion of LightCharge®. Make sure all parts of LightCharge® are secure before resuming your ride.

Allowing connector wire to hang loose is dangerous. Always secure the excess loose connector wire away from the moving, steering, or braking parts of the bicycle.

When installing the LightCharge®, make sure that it does not interfere with or hinder any of the bicycle moving, braking, or steering parts. Make sure that LightCharge® is installed where you cannot come in contact with it in the event of an accident or collision. Always make sure all parts of LightCharge® are securely installed before and after the ride. If you

3 | P a g e

ENGLISH

are not sure how to install any portion of LightCharge®, consult or hire a professional installer.

Dynamo may become warm during operation. Do not touch the dynamo for a few minutes after completing your ride.

Incorrect installation of the dynamo may cause it to fall between the wheel spokes and jam the wheel. Always ensure that your dynamo is secure before and after the ride, and every few miles during the longer rides.

Incorrect installation of the dynamo may cause an increase in the wear of a bicycle tire. If you are not sure how to install the dynamo, consult or hire a professional installer.

The kits are impact resistant and water resistant, but not waterproof. Avoid submerging in water or using in rain or snow without a protective cover. If LightCharge® becomes wet, remove LightCharge® from the bicycle and allow it to dry out before reinstalling and using again.

The connectors of this device may contain a small amount of nickel. Persons sensitive to nickel may experience symptom from the prolonged skin contact with the connectors.

The kits may contain small parts which may constitute choking hazard. Keep them out of reach of small children.

Read the installation instructions carefully. Do not attempt to substitute any parts of the LightCharge®. Use LightCharge® only with the compatible mobile devices. Never force the connectors into ports. Make sure that the connectors match a port and that you have positioned them correctly.

These kits are not suitable for rough terrains or trick bicycling.

The kits may be affected by extreme temperatures. Always keep the kits between -15◦ C (5 F) and +55◦ C (131 F).

Bike2Power is not responsible for any damages or failure to the devices charged using the LightCharge®. Bike2Power is not responsible for any damages or failures caused to the bicycle used to mount the LightCharge®.

Compatible Devices

LightCharge® is compatible with 5v devices able to charge through USB and dynamochargeable and USB-chargeable bicycle lights.

LightCharge® is compatible with the major smartphone makes and models as well as Android® phones and iPhone®. LightCharge® may be connected to a hub dynamo or bottle (side) dynamo.

4 | P a g e

ENGLISH

PART

DIMENSIONS

WEIGHT

OPERATING TEMPERATURES

Dynamo / Mounting Brackets**

40.2 x 94.3 mm (1.6 x 3.7 in)

250 g w/ brackets (8.8 oz) 190 g w/o brackets (6.7 oz)

-15◦ C to +55◦ C (5 F to 131 F)

USB Charger

45 x 35 x 25 mm (1.7 x 1.4 x 1.0 in)

28 g (1 oz)

-15◦ C to +55◦ C (5 F to 131 F)

Speed of bicycle (km/h)

Charging electric

current (mA)

7.4 (4.6 mi/h)

150

11.0 (6.8 mi/h)

200

12.5 (7.8 mi/h)

220

13.7 (8.5 mi/h)

235

14.0 (8.7 mi/h)

250

Parts and Technical Specifications

Parts* LightCharge® Smartphone/Lights Bicycle USB Charger for Bottle Dynamo may contain:

 Dynamo Mounting Bracket  Bottle (Side) Dynamo  LightCharge® USB Charger  DynaCap Tire Defender  Protective mounting pad and zip ties

LightCharge Smartphone/Lights Bicycle USB Charger for Hub Dynamo may contain:

 LightCharge® USB Charger  Protective mounting pad and zip ties.

*Product colors and accessories are subject to change without notice

Technical Specification*

*All dimensions are approximated. ** Mounting bracket fits forks up to 1.25 inches in diameter

Output Power*

*Largest output current is 500mA. All values are approximated.

5 | P a g e

+ 11 hidden pages

Bike2Power LightCharge User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual