BigTent Outdoor Equipment CLC2-1200BK, CLC2-1200RD, CLC2-2200BK, CLC2-2200RD User Manual

5. Solution to malfunction

* If there is something wrong with the product, please check the following first

1. If it does not light up, check the charging status

2. If the external device can not be charged, check the On state of the function button

Warranty

6. Specifications

Product name

Model name

LED color temperature

Brightness (lumen)

Run Time

Size

Weight

Battery type

Battery capacity

Charging time

INPUT

OUTPUT

Origin

7. Package

CLAYMORE ULTRA+ II

CLC2-1200(RD/BK)

Warm : 3000K , Bright : 4200K , Cool : 6200K (±15%)

40~1,200 Lm

10~80hour

125×115.6×39.8mm

465g

Li-ion

3.6V 11,600mAh

6 hour

(Quick charge adapter)

-

M

USB 5V 2A / 9V 2A / 12V 1.5A

5V 2A / 9V 2A / 12V 1.5A

MADE IN KOREA

CLAYMORE ULTRA+ II

CLC2-2200(RD/BK)

50~2,200 Lm

15~150 hour

125×115.6×55.8mm

675g

Li-ion

3.6V 23,200mAh

8 hour

(Quick charge adapter)

-

Item

Model No.

X

Seller

Date of Purchase

CLAYMORE ULTRA+ II

CLC2-1200(RD/BK) CLC2-2200(RD/BK)

-

M CLAYMORE ULTRA+ II

-

X

ULTRA plus II-M/X

1. Thank you for purchasing CLAYMORE series of Prism Co., Ltd.

2. This product has passed strict quality control and testing process.
When you find some inappropriate working on the product, please contact
authorized service center listed on below.

Free Service

1) Failure of the product under normal operating conditions during the warranty
period will be repaired by Prism or authorized service center on free of charge.
Some shipping or handling charges may be involved.

2) Warranty period: 1 years

Charged Service

1) Damage caused when the warranty period is over

2) Damage caused due to the user’s mishandling, abuse, or improper operation
Damage caused by arbitrary or personal repair or disassemble in unauthorized service center

3)

4) Damage from input electricity or cable defect

5) Damage caused by natural disaster

①Claymore Ultra+ II ②Lantern Hook ⑤Manual④Pouch

③ Micro 5pin

USB cable

Cautions for long-term storage

* After the battery is fully discharged, the battery remaining indicator may not flash.
If this happens, plug the USB cable back in or press the button to turn the battery indicator again.

* For long-term storage, fully recharge the lantern. (Repeat every six months)
* Please keep in mind that if stored below 10°C the battery life may be affected.
* Please keep in a dry place without moisture.

Official Import Distributor

Bigtent Outdoor Equipment Ltd. www.bigtentoutdoors.com

[e-mail]

Manufacturer

Prism Co., Ltd.

www.claymorelight.com / www.prismlight.co.kr
[e-mail]
101-1501, Chunui-Technopark, Bucheon-ro 198 Road, 36,
Bucheon-si, Gyeonggi-do, Korea

User Manual

This portable lantern contains Li-ion battery.
Please follow user's manual before using it. If any abnormality is found in the product,
please discontinue use and contact the dealer or service center that you purchased.

1. Caution

① Do not use it near high temperature such as fire or heating equipment. It may cause explosion and ignition.
② This product is water resistant. However, if left in the rain for a long time, it may cause malfunction.
If you accidentally fall into the water, please quickly wipe it off
③ Do not store or use in vehicles exposed to direct sunlight. It may cause explosion and malfunction.
④ Do not touch the light source directly as it may become very hot during use. Use handle to carry out.
⑤ Do not use when it exceed the operating temperature range (-10 ° C to 40 ° C).
⑥ Do not use external power other than USB 5V. It may cause heat and ignition.
⑦ Please do not place in the reach of infants. It may cause swallowing of parts or injury.
⑧ Supervisor by guardian is necessary when used by children.
Misuse of lantern may cause injury or electric shock.
⑨ Do not insert any metal parts into the terminal block of the connector.
It may cause heat, explosion or electric shock.
⑩ Do not disassemble or modify the product.
⑪ Do not touch the connector with wet hands. There is a danger of electric shock.
⑫ After use, be sure to turn off the power.
⑬ Dropping or impacting the product can cause damage to the inside of the product,
resulting an unexpected failures in normal use. Be careful not to apply impact to the body.

2. Parts & Contents

① Power button
② Dimming button
③ Function button

(LED Color temperature/SOS Flash)

④ Battery indicator

⑧ Lantern Hook

⑨ Metal handle

3. Operating manual

● Charging the lantern

1) As shown in the figure, open the cover of the product and connect the USB cable to the charging port.
Charging time may vary depending on battery capacity and external environment.

⑥

※ Please charge with the supplied USB cable with 5V 2A / 9V 2A / 12V 1.5A smart quick charger.

2) When the product is being charged, the battery level indicator flickers. If the light is not flicking and
all the lights are on, it indicates that the battery has been fully charged

※ When charging

Battery indicator Charging

④ Battery indicator

※ When the battery capacity is less than 4%,
Battery check and power bank functions may not work.

● Operate the lantern

1) On/Off & Dimming :

- Stepless Dimming

push and hold button to increase brightness.Push and hold buottn to decrease brightness.

※Blinks once when Maximum and Minimum brightness is reached

- 5 Step Dimming

Push button shortly to increase brightness. Push button shortly to decrease brightness.

2) Battery Check : Press button once , the battery level is displayed in 4 steps of LED quantity.

3) LED Color change: : When the power is ON, pressing function button once enables to adjust the color of light in three
steps in order of Warm > Bright > Cool

Warm
Bright

Cool

4) SOS-flash: ③Press and hold button for 2 seconds from ON states to activate the SOS distress signal.
Press button once again to stop SOS flash

Push on/off button shortly to turn and off the lante

LED light with low color temperature, warm light feels like ordinary gas lantern
LED light with a neutral color of daylight and light bulb and comfortable feeling
LED light with high color temperature, cool light feels like ordinary fluorescent light

Micro 5-pin USB charger that plugs into a
PC or laptop and is compatible with
charging cable for smartphones

※ When using

Battery indicator Charging

0~25%

25~50%

Flickers

50~75%

75~100%

Fully charged

Stop

.

0~50%

Flickers

50~100%

Fully charged

Stop

● Power bank function

Claymore Ultra+ II model offers smart quick charge.
Connect various devices and lantern with USB cable from ③USB out port and it will automatically start charging.
(On status : Battery indicator turns on)
If power bank is not working, press or button once to activate it. (5V charge)

③

* Charging time may vary depending on battery capacity of
external devices and external environment of the product.

Press once -> Turn on Power bank function

4. How to install the product

● When making the lantern stand up on a flat and even surface

1) You can place the lantern vertically or horizontally
when configuring the lantern on a flat surface

2) Turn the ⑨metal handle to correct angle of lighting and
place on a flat surface to obtain desired lighting direction

● When hanging on a lantern hook or string

1) Turn metal handle to adjust the angle of light in for the desired direction

● When mounting the lantern on camera tripod

1) Unscrew lantern hook from handle,then put the hole of the handle wire into the camera tripod and fix it.

2) Adjust the angle of the handle wire or the direction of the tripod to illuminate the desired spot.

Angle
Adjustment

(0˚>45˚>90˚)

⑤ LED Light and Diffusion filter
⑥ USB In port
⑦ USB Out port

Battery Check

(Press once->Battery indicator)

LED Color Change

(Press once->LED Color change) (Press and hold for 2 seconds->SOS Flash)

SOS-Flash