5. Specification
Focus Light
Mode
8°
25°
MAXMIN
35
Lm
400
Brightness
70
Operating time
Distance
hour
3
m
Battery
performance
3.6V 3,500 mAh 12.6Wh 3.6V 800mAh 1.2Wh
▶ By one full charge of Claymore Heady+, you can save 10.5 AAA disposable
batteries going into the landfill.
Lm
6
hour
90
m
Claymore Heady+ AAA battery
(12.60wh) (12.55wh)
Turbo Light Flood Light
MAXMIN
35
Lm
600
Lm
35
4
150
hour
70
m
DisposableRechargeable
AAA
AAA
AAA
AAA
AAA
40
hour
5
m
Lm
hour
Warm(3000K)
Bright(4200K)
Cool(6200K)
MAXMIN
400
6
10.5
packs
hour
Warranty
Item
Model No.
Seller
Date of Purchase
1. Thank you for purchasing CLAYMORE series of Prism Co., Ltd.
Lm
2. This product has passed strict quality control and testing process.
When you find some inappropriate working on the product, please contact
authorized service center listed on below.
Free Service
1) Failure of the product under normal operating conditions during the warranty
period will be repaired by Prism or authorized service center on free of charge.
Some shipping or handling charges may be involved.
2) Warranty period: 12 months
Charged Service
1) Damage caused when the warranty period is over
2) Damage caused due to the user’s mishandling, abuse, or improper operation
3) Damage caused by arbitrary or personal repair or disassemble in unauthorized
service center
4) Damage from input electricity or cable defect
5) Damage caused by natural disaster
CLAYMORE heady+
CLC-460BK/RD/TN
heady plus
Product name
Model name
Weight
Size
Color temperature
CLAYMORE heady+
CLC-460BK/RD/TN
104g
74×44×44.2mm
Warm : 3000K , Bright : 4200K , Cool : 6200K (±15%)
Battery capacity
Charging time
INPUT
Origin
Li-ion 3.6V 3,500mAh 12.60Wh (Nominal)
6 hour
USB 5V 1A
MADE IN KOREA
Cautions for long-term storage
After the battery is fully discharged, the battery remaining indicator may not flash.
*
If this happens, plug the USB cable back in or press the button to turn the battery indicator again.
For long-term storage, fully recharge the lantern. (Repeat every six months)
*
Please keep in mind that if stored below 10°C the battery life may be affected.
*
Please keep in a dry place without moisture.
*
Official Import Distributor
Bigtent Outdoor Equipment Ltd. www.bigtentoutdoors.com
info@bigtentoutdoors.com
Manufacturer
Prism Co., Ltd.
www.claymorelight.com / www.prismlight.co.kr
info@prismlight.co.kr
101-1501, Chunui-Technopark, Bucheon-ro 198 Road, 36,
Bucheon-si, Gyeonggi-do, Korea
User Manual
This portable lantern contains Li-ion battery.
Please follow user's manual before using it. If any abnormality is found in the product,
please discontinue use and contact the dealer or Official Distributor.
1. Caution
① Do not use it near high temperature such as fire or heating equipment.
It may cause explosion and ignition.
② This product is water resistant. However, if left in the rain for a long time,
it may cause malfunction. If you accidentally fall into the water, please quickly wipe it off.
③ Do not store or use in vehicles exposed to direct sunlight. It may cause explosion and malfunction.
④ Do not touch the light source directly as it may become very hot during use.
⑤ Do not use when it exceed the operating temperature range (-10°C to 40°C).
⑥ Do not look directly into the LED light source.
⑦ Please do not place in the reach of infants. It may cause swallowing of parts or injury.
⑧ Supervisor by guardian is necessary when used by children.
Misuse of head lantern may cause injury or electric shock.
⑨ Do not insert any metal parts into the terminal block of the connector. It may cause heat,
explosion or electric shock.
⑩ Do not disassemble or modify the product.
⑪ Do not touch the connector with wet hands. There is a danger of electric shock.
⑫ After use, be sure to turn off the power. If not, it may cause leakage.
⑬ When adjusting the angle, please do not bent forcefully. It may cause damage to the product.
⑭ Dropping or impacting the product can cause damage to the inside of the product,
resulting in unexpected failures in normal use. Be careful not to apply impact to the body.
2. Parts & Contents
Head band hook
Lantern hook
USB
charging port
Tripod socket
(1/4 inch)
① Head band ② Clip ③ Pouch
Battery remaining indicator
ON/OFF&Brightness
control&Rock Button
Mode adjustment button
Diffusion filter
LED(Flood Light)
LED(Focused Light)
LED Lens
④ USB charging cable
(Micro 5pin)
3. Operating manual
ON/OFF Stepless Dimming
1
X
Light turns on when pushing
button shortly.
Repeat to turn off the light.
ON/OFF
1
X
When light is on, push
button shortly to change
*6 different light mode
(Focuse > Turbo > Floo)
MODE1
MODE2
MODE3
※Using turbo mode in maximum brightness for a long time
may cause battery heat so recommended to use in a short time
Focused light(8°)
long distance (narrow)
Focused light(25°)
long distance (wide)
Turbo Light
long distance
(narrow & wide)
When light is on, push and hold
buton to adjust brightness
to increase brightness.
Push and hold button once
again to decrease brightness
5s 2s
To assure the does not accidently
turn on.
Lock Start: When the light is off, press and
keep the button for 5 seconds.
※ LED indicator blinks two times
Lock End: Press and keep the
button for 5 seconds.
MODE4
MODE5
MODE6
Warm
LED light with low color temperature, warm light feels like ordinary gas lantern
LED light with a neutral color of daylight and light bulb and comfortable feeling
Bright
LED light with high color temperature, cool light feels like ordinary fluorescent light
Cool
5 STEP Dimming
① ②
or
When light is on while pushing down
the button and press the
button to control 5 step dimming
※Blinks once when Maximum and Minimum
brightness is reached
SOS-flashLock
SOS
When light is on, push
button over 2 seconds to
make SOS signal on each mode.
Flood light(Warm)
Short distance (wide)
Flood light(Bright)
Short distance (wide)
Flood light(Cool)
Short distance (wide)
Charging method Battery check
Open bottom
rubber cover and connect
USB cable to charge lantern.
When charging, battery indicator will flicker in 3 step to
show battery remaining.
(Battery remaining will shown for 2 seconds in 1 step brightness on each mode)
Battery indicator
0~33%
33~66%
66~99%
Fully charged
Flickers
stop
※ This lantern contains memory function that returns to the last setting when turn off and on
4. How to use a product
1) Using Headband
2) Using Clip
Clip
hole
①
3) Angle adjustment
4 step tilting is possible to
light designated area.
4) Using lantern hook
5) Using tripod socket
Claymore Heady uses 1/4 inch
tripod socket so it is compatible
with all the 1/4 inch accessories.
※ accessories and connecting
adapter is for sale
Insert head band on the band hook of the product and adjust length to
fit your head.
As described on the below picture, insert clip in the clip hole on the band hook
and push until it make a “Click” sound. You can use it on the bag strap or pocket
with clip.
②
You can use with karabiner or hang
it on the string with hook.
How to
detach clip
push bottom of clip to the upside
maximum
°
90