Bigben Interactive 4300T, 4300R Users Manual

BB4300

User’s Manual

Manuale d’uso

Manuel de l’utilisateur

PS3™ Parental Control.

T

H

M

t

n

O

O

t

h
u
e

R

1.A.

4.A.

4.D.

1.B.

4

3

4

1

3

2

4

1

1.C.

3

1

4.B.

4.E.

NOTE

R

3

2

4

R

4.F. 4.G.

3

2

4

1

4.C.

3

2

4

1

-

-

-

TE

-

-

-

-

-

-

I

No
co
res

C

-

-

-

-

-

-

-

1.

5.A.

5.D.

5.B.

2

4

1

5.E. 5.F.

3

4

1

5.C.

L

SELECT START

R

3

2

4

1

5.G.

R

3

4

1

3

2

4

1

N
au

2.

W
co
th

3.

-

-

7.

L

SELECT START

R

3

2

4

1

4.

ENGLISH

THIS PACKAGE INCLUDES:

- Wireless vibrating gamepad for PS3™.

- USB receiver to connect to the USB port on your console.

- 2 AA batteries included.

TECHNICAL CHARACTERISTICS:

- Technology used: 2.4 GHz.

- 2 vibration motors

- 3 axis tilt sensors

- 1x LCD screen

- Ergonomic, non slip triggers

- Parental control system

IMPORTANT

Note that this system will only work if no other controllers are connected to the console and are not accessible to the player. The parental
controller MUST be the only controller available. If another controller is used or accessible, game play will still be possible. The parent must
restrict all access to additional controllers and ensure the password is kept a secret.

CONTROLLER SET-UP AND USE:

- Insert the USB receiver provided in the pack into one of the ports of your PS3™.

- Check that the gamepad’s power switch is set to OFF.

- Open the gamepad’s battery compartment.

- Insert the 2 x AA batteries, whilst observing the correct polarity.

- Close the battery compartment

- Ensure that NO other controllers are connected to the PS3™. If so, switch them off.

- Switch the parental controller on.

1. STARTING UP THE PARENTAL CONTROL SYSTEM FOR THE FIRST TIME:

A. When you fi rst power on the controller the LCD screen will light up and display 3x dashes, a lock symbol and the word “OFF”.

The word “PWD” will appear fl ashing.

B. Enter the 6 digit security code for the parental controller using the numbers on the cross, circle, square and triangle buttons on your

controller.

Note that there is only room to display 3 numbers at any one time, so the security code number will scroll across and only display the

last 3 numbers entered.

By default, the code is 423124. It can be changed later. (See section “Changing the safety code”)
C. The parental controller will start up. The screen displays the word “ON”, a lock symbol and the programmed game time.
By default game time is set at 15 minutes. It can be changed later. (See section “Setting the clock”)

NOTE: If the security code entered is incorrect, the screen will display “Err” and three beeps will sound. At the third error, the control will
automatically switch off.

2. IN USE:

When 5 minutes of game time is left, 3 beeps will sound and will be repeated again when 1 minute game time remains. When the
counter reaches zero, the word “OFF” is displayed on the LCD screen and the controller switches off automatically. Game commands are
then locked.

3. RESTARTING THE PARENTAL CONTROL:

- When the clock reaches zero, game commands are blocked and the LCD screen will return to the security code menu.
You must then re-enter the security code so the parental controller restarts with the last programmed game time.

- To change the game play time to your own preference, simply follow the clock setting procedure without changing the settings.
(See section “Setting the Clock”)

4. CHANGING THE SECURITY CODE:

A. Press and hold down the “SELECT” and “START” buttons for 2 seconds.
B. The word “PWD” will fl ash on the LCD screen. Enter your code using the numbers on the cross, circle, square and triangle buttons on

your controller. A beep will sound.

C. The words “PWD” and “mins” will fl ash.
D. Press the “START” button. A beep will sound.
E. The word “PWD” fl ashes, showing that you can enter the new security code.
F. Enter your new code using the numbers on the cross, circle, square and triangle buttons on your controller.
G. Once the last digit is entered, press the “START” button.

H. A beep will sound indicating that the new code is validated.

T

A

M

U

O

t

a
a

o

5. SETTING THE CLOCK:

A. Press and hold down buttons “SELECT” and “START” for 2 seconds.
B. The word “PWD” fl ashes. Enter your code using the numbers on the cross, circle, square and triangle buttons on your controller. A

beep will sound.

C. The words “PWD” and “mins” fl ash.
D. Press the “SELECT” button. A beep will sound.
E. A number showing the programmed game time is displayed on the LCD screen. The word “mins” fl ashes, showing that you can set

the new game time.

F. Adjust game time using the buttons L2 and R2.*
Short press on L2: Reduce the time by 1 minute.
Long press L2: Reduce the time by 5 minutes in length.
Short press on R2: Increase the time by 1 minute.
Long press on R2: Increase the time by 5 minutes in length.

G. Once the desired game play time is reached, press the “SELECT” button.
H. A beep sounds showing that the new game time has been validated.

* The game time can be set from 001 to 240 minutes (4 hours) maximum.

6. STANDBY MODE:

If the controller is inactive for over 3 minutes, it will switch off automatically. The remaining game play time at shut-off is saved.
To “wake” the parental controller, press the “SELECT”, “START” or “HOME” button.

NOTE: If the controller is switched “OFF” or if the batteries are dead or removed, the safety code will have to be entered when the
controller is switched back on.

7. REINITIALISING THE PARENTAL CONTROL:

If you forget the security code, the parental controller can be reset to its default parameters.
Press and hold buttons L1, L2, R1 and R2 for 5 seconds. The default security code is 423124, and game time is 15 minutes.

Note that it is important that the user does not know this default reset code. If they know it they can continue to play for 15 minute
intervals.

TROUBLESHOOTING.

Controller is not working.

- Ensure that the power button is the ‘On’ position.

- Check that the batteries are not low. If so, replace the batteries. If power is low the Player LED will normally fl ash to indicate that the

batteries need replacing.

- Ensure that the receiver is connected to the console and press the home button on the controller to connect.

- Check that the switch on the receiver is set to PS3™ mode.

- Ensure that the correct password is being used.

ES

-

-

-

C

-

-

-

-

-

I

Ob
de
res

P

-

-

-

-

-

-

-

1.

N
fal

2.

Cu
Cu
bl

3.

-

-

4.