Biamp VB-Y12, VB-Y15, VB-Y32, VB-Y35 User guide

Community V Series
Yoke Mounting Bracket (VB-Y)

Installation Guide

Models

VB-Y12
VB-Y15
VB-Y32
VB-Y35

PRODUCT DESCRIPTION

Optional yoke brackets for the larger full-range models
V2-12/15/32/35 allow for direct horizontal mounting of the
loudspeaker to a wall or ceiling. This unique yoke bracket
also permits vertical mounting with a selection of 0º, 10º, or
20º, of either upward or downward inclination.

Note: Yoke brackets are included with compact V2 models
V2-6/8/26/28.

CONTENTS

Qty Description

1 Metal Yoke Veris (appropriate size/color)

1 Metal Bracket Lg 10° Veris (color-matched)

1 Metal Bracket Lg 20° Veris (color-matched)

2 Washer 7/16" ID x 2" OD x 1/8"

3 10mm x 1.5mm x 30mm Hex Head Bolt

4 Flat washer 10mm

3 Lock washer 10mm

1 10mm x1.5mm Hex Nut Gr 5

Optional brackets provide 10° or 20° of down-tilt

A: 9300 S.W. Gemini Drive Beaverton, OR 97008 USA W: www.biamp.com

YOKE INSTALLATION

VB-Y12

The yoke will be mounted to the center holes on both ends
of the loudspeaker. Determine if a down-tilt will be needed
as this defines the orientation of the yoke when mounted
vertically. If mounted flat or horizontally, the 10°/20°
brackets aren't needed, and yoke orientation doesn't matter.

1. Orient the yoke as shown for the

TOP

expected down-tilt if mounting
vertically. Attach the yoke to center
mounting holes as shown in both
the exploded drawing below and
the assembly at right.

Note: A lower prole solution can be

achieved by using holes further in on the
yoke ends, but will reduce pan angles.

10°

Down-tilt

2. If mounting vertically with a down­tilt, attach the appropriate bracket
(either 10° or 20°) to the top slot in
the yoke back.

3. Attach the loudspeaker to the
structure (hardware not provided).

Yoke orientation for 10° or 20° down-tilt

BOTTOM

20°

20°

Down-tilt

10°

Typical yoke prole

V2-12 with yoke attached

(shown with 20° bracket)

Exploded Assembly

CONTACT US

Email: [e-mail]

Web: support.biamp.com

Warranty: biamp.com/legal/warranty-information

Safety & Compliance: biamp.com/compliance

(optional)

CAUTION: Installation of V SERIES loudspeakers should

only be performed by trained and qualied personnel. It is
strongly recommended that a licensed and / or certied

professional structural engineer (P.E.) approve the mounting.
Severe injury and/or loss of life may occur if this product is
improperly installed.

A: 9300 S.W. Gemini Drive Beaverton, OR 97008 USA W: www.biamp.com

27APR2022