Biamp REMOTE PANELS User Manual
®
ACCESSORY
RP-L1, RP-L2, & RP-S4
Remote Panels
12
4
RP-S4
RP-L1
3
RP-L2
RP-L1, RP-L2, & RP-S4 Remote Panels provide 1 or 2 level controls, or 4 push-button switches,
mounted on a grey 'decorator' style cover plate, with a single-gang 'cut-in' style PVC electrical backbox and pre-wired pigtails. Remote Panels allow remote control of volume, muting, and various other
functions in BIAMP products.
FEATURES
single or dual 25kΩ linear level controls (RP-L1 & RP-L2)
4 double-pole/double-throw push-button switches (RP-S4)
controls mounted on light grey 'decorator' style cover plate
single-gang 'cut-in' mounting style PVC electrical back-box
mounting in any wall or panel (1/8" to 1" surface thickness)
pre-wired pigtail from each control for ease of installation
jumpers allow latching or momentary switch action (RP-S4)
RP-S4 control of digital products via Remote Interface Kit
remote control of volume, muting, & various other functions
RoHS compliance
covered by Biamp Systems' five-year warranty
ARCHITECTS & ENGINEERS SPECIFICATION
RP-L1: The remote panel shall provide a single 25kW linear taper rotary potentiometer, mounted on a light grey 'decorator' style
cover plate, with a single-gang 'cut-in' style PVC electrical back-box and a pre-wired pigtail. The remote panel shall provide remote
volume control for a variety of BIAMP products. The remote panel shall be compliant with EU Directive 2002/95/EC, the RoHS
directive. Warranty coverage shall be five years. The remote panel shall be a BIAMP RP-L1.
RP-L2: The remote panel shall provide two 25kW linear taper rotary potentiometers, mounted on a light grey 'decorator' style
cover plate, with a single-gang 'cut-in' style PVC electrical back-box and pre-wired pigtails. The remote panel shall provide remote
volume control for a variety of BIAMP products. The remote panel shall be compliant with EU Directive 2002/95/EC, the RoHS
directive. Warranty coverage shall be five years. The remote panel shall be a BIAMP RP-L2.
RP-S4: The remote panel shall provide four double-pole/double-throw push-button switches, mounted on a light grey 'decorator'
style cover plate, with a single-gang 'cut-in' style PVC electrical back-box and pre-wired pigtails. The remote panel shall provide
remote switch control for a variety of BIAMP products. The remote panel shall be compliant with EU Directive 2002/95/EC, the
RoHS directive. Warranty coverage shall be five years. The remote panel shall be a BIAMP RP-S4.
Biamp Systems, 10074 S.W. Arctic Drive, Beaverton, Oregon 97005 U.S.A. (503) 641-7287 www.biamp.com
APPLICATIONS
®
RP-L1
products
801 Mic/Line Mixer . . . . . . . .
601 Mic/Line Mixer . . . . . . . .
301 Mic/Line Mixer . . . . . . . .
CMA Series Mixer/Amplifiers . . . . .
IWA250 In-Wall Mixer/Amplifiers . . . .
Voltage Control Box . . . . . . .
RP-L2
products
801 Mic/Line Mixer . . . . . . . .
601 Mic/Line Mixer . . . . . . . .
301 Mic/Line Mixer . . . . . . . .
CMA Series Mixer/Amplifiers . . . . .
IWA250 In-Wall Mixer/Amplifiers . . . .
Voltage Control Box . . . . . . .
functions
Main Output (level)
Main Output (level)
Main Output (level)
Main Output (level)
Inputs/Outputs (level)
various products
Audia (programmable)
Nexia (programmable)
functions
Main Output (level)
Main Output (level)
Main Output (level)
Main Output (level)
Inputs/Outputs (level)
various products
Audia (programmable)
Nexia (programmable)
RP-S4
products
801 Mic/Line Mixer . . . . . . .
601 Mic/Line Mixer . . . . . . .
301 Mic/Line Mixer . . . . . . .
CMA Series Mixer/Amplifiers . . . .
IWA250 In-Wall Mixer/Amplifiers . . .
Voltage Control Box . . . . . .
Logic Box . . . . . . . . . .
flange
functions
Main Output (mute)
Main Output (mute)
Main Output (mute)
Main Output (mute)
Inputs/Outputs (mute)
various products
Audia (programmable)
Nexia (programmable)
various products
Audia (programmable)
Nexia (programmable)
w
GND C +10V
Single-Gang
Cut-In PVC
Electrical
Back-Box
knock-outs
(3.175mm to 25.4mm)
Mounting Cavity must be exactly 3.6" high,
2.25" wide, and at least 2.75" deep.
(91.44mm H x 57.15mm W x 69.85mm D)
Mounting Surface may be from 1/8" to 1" thick.
flange
RP-L1 & RP-L2 Block Diagram RP-S4 Block Diagram
high (cw)
25kΩ
cwccw
linear
wiper
low (ccw)
white
red
green
white
red
green
up
wiper
down
DPDT
up (released)
wiper
down (depressed)
white
red
green
Biamp Systems, 10074 S.W. Arctic Drive, Beaverton, Oregon 97005 U.S.A. (503) 641-7287 www.biamp.com
18Dec06
Loading...