Biamp AUDIAFLEX OP-2E User Manual

®

Audia® OP-2e Output Cards

Dual-Channel Mic/Line Outputs

OP-2e output cards allow each AudiaFLEX installation to have the quantity and type of outputs
required. Each OP-2e Card provides two channels of mic/line output, as part of AudiaFLEX hardware.
Outputs are balanced, and are provided on plug-in barrier strip connectors. Software control of
individual outputs includes: mute; level; signal invert; and full-scale output reference.

FEATURES

 each cards provides two mic/line output channels
 integrates seamlessly into AudiaFLEX systems
 balanced outs on plug-in barrier strip connectors
 -100~+12dB level fader range for volume control

Biamp Systems, 10074 S.W. Arctic Drive, Beaverton, Oregon 97005 U.S.A. [phone] www.biamp.com

 invert function allows 180° signal polarity reversal
 selectable ref level for best interface/performance
 RoHS compliance and AES grounding practices
 covered by Biamp Systems' five-year warranty

®

Audia® OP-2e Output Card SPECIFICATIONS

Frequency Response (20Hz~20kHz @ +4dBu):

THD +N (20Hz~20kHz @ +4dBu):

Dynamic Range (20Hz~20kHz, 0dB):

Output Impedance (balanced):

Maximum Output (balanced):

Crosstalk (channel-to-channel @ 1kHz):

+0/-0.25dB

< 0.0035%

> 110dB

200 ohms

+24dBu

< -95dB

Sampling Rate:

D/A Converters:

Selectable Full Scale Output Levels:

Compliance:

AES48-2005 Grounding & EMC practices

EU Directive 2002/95/EC, RoHS directive

48kHz

24-bit

+24dBu, +18dBu, +12dBu,

+6dBu, 0dBu, or -31dBu

ARCHITECTS & ENGINEERS SPECIFICATION

The mic/line outputs shall be a two-channel output card for AudiaFLEX hardware. Each output card shall provide two
balanced analog mic/line outputs on plug-in barrier strip connectors. Software adjustment of individual outputs shall include:
mute; level; signal invert; and selectable output reference level. Digital-to-Analog conversion shall be 24-bit, with a sampling rate
of 48kHz. Performance specifications (20Hz~20kHz) shall be: Frequency Response +0/-0.25dB; THD+N < 0.0035%; and Dynamic
Range > 110dB. The mic/line output card shall incorporate AES48-2005 Grounding & EMC practices, and shall be compliant with EU
Directive 2002/95/EC, the RoHS directive. Warranty shall be 5 years.
The mic/line outputs shall be an OP-2e Output Card for AudiaFLEX.

Biamp Systems, 10074 S.W. Arctic Drive, Beaverton, Oregon 97005 U.S.A. [phone] www.biamp.com

18Dec06