Biamp AUDIAFLEX IP-2 User Manual

®

Audia® IP-2 Input Cards

Dual-Channel Mic/Line Inputs

IP-2 input cards allow each AudiaFLEX installation to have the quantity and type of inputs required.
Each IP-2 Card provides two channels of mic/line input, as part of AudiaFLEX hardware. Inputs are
balanced, and are provided on plug-in barrier strip connectors. Software control of individual inputs
includes: gain w/ peak indication; +48V phantom power; mute; level; and signal invert.

FEATURES

 each cards provides two mic/line input channels
 integrates seamlessly into AudiaFLEX systems
 balanced inputs on plug-in barrier strip connectors
 0~66dB gain range for microphone or line sources
 input peak indication provides 6dB of headroom

 +48V phantom power for condenser microphones
 -100~+12dB level fader range for volume control
 invert function allows 180° signal polarity reversal
 RoHS compliance and AES grounding practices
 covered by Biamp Systems' five-year warranty

Biamp Systems, 10074 S.W. Arctic Drive, Beaverton, Oregon 97005 U.S.A. [phone] www.biamp.com

®

Audia® IP-2 Input Card SPECIFICATIONS

Frequency Response (20Hz~20kHz @ +4dBu):

THD +N (20Hz~20kHz @ +4dBu):

line level (0dB gain)
mic level (54dB gain)

Equivalent Input Noise (20Hz~20kHz, 66dB gain, 150 ohm):

Dynamic Range (20Hz~20kHz, 0dB):

Maximum Gain (input channels):

Input Impedance (mic/line balanced):

Maximum Input (mic/line):

+0/-0.4dB

< 0.006%

< 0.04%

-125dBu

> 108dB

66dB

8k ohms

+24dBu

Crosstalk (channel-to-channel @ 1kHz):
line level
mic level

Phantom Power:

Input Gain Range (variable trim):

Sampling Rate:

A/D Converters:

Compliance:

AES48-2005 Grounding & EMC practices

EU Directive 2002/95/EC, RoHS directive

< -80dB
< -75dB

+48 VDC (7mA/input)

0dB ~ +66dB

48kHz

24-bit

ARCHITECTS & ENGINEERS SPECIFICATION

The mic/line inputs shall be a two-channel input card for AudiaFLEX hardware. Each input channel shall provide two balanced
analog mic/line inputs on plug-in barrier strip connectors. Software adjustment of individual inputs shall include: gain w/ peak
indication; +48V phantom power; mute; level; and signal invert. Analog-to-Digital conversion shall be 24-bit, with a sampling rate
of 48kHz. Performance specifications (20Hz~20kHz) shall be: Frequency Response +0/-0.4dB; THD+N < 0.006% (line) < 0.04%
(mic); EIN -125dBu; and Dynamic Range > 108dB. The mic/line input card shall incorporate AES48-2005 Grounding & EMC
practices, and shall be compliant with EU Directive 2002/95/EC, the RoHS directive. Warranty shall be 5 years.
The mic/line inputs shall be an IP-2 Input Card for AudiaFLEX.

Biamp Systems, 10074 S.W. Arctic Drive, Beaverton, Oregon 97005 U.S.A. [phone] www.biamp.com

18Dec06