PT12060
owner's manual
The B&G Prototype™ Amp is our take on the classic tube amps of the 1950s & '60s.
Inspired by the sound and design concepts of this era, our hearts and minds were set to
combine the best features of those classics with our own ideas and innovation.
Our main goal was to provide a great amount of clean headroom and to push the
breaking point higher, without compromising the power and growl of the tube
overdrive and fuzz. In order to provide that warm vintage sound, we went on a quest to
source limited amounts of new old stock audio capacitors and find the perfect match
between all components. Each B&G Prototype™ amp is assembled and hand-wired
in Israel by the B&G Private Build staff.
This NOS capacitors edition is limited to 100 pieces worldwide.
Features Include:
• B&G Prototype™ Model - Limited Edition
• New Old Stock Capacitors
• Two 6V6 Output Tubes
• Three 12AX7 Preamp Tubes
• One 12AT7 Tube
• 5Y3 Rectifier Tube
• 16 Watts Output Power
• Two 10” Jensen® P-10R Speakers For A Rich, Warm Tone
• Two Switch-Operated Gain Stages
• Push-Pull Volume Knob For High/Low Sensitivity Input
• Genuine Accutronics® Tube-Driven Spring Reverb Unit With Extended Control
• Cathode Bias - Allows For A New Set Of Tubes To Be Installed Without Any Adjustments.
• B&G Solid Brass Control Panel & Tube Guard
• B&G Circuit-Protecting Power Switch
Loading...