Beyond LED Technology BJON1049 Specifications

Beyond LED Technology | 1939 Parker Ct, Stone Mountain, GA, 30087

Du e to c ontinuous product improv ement, informat ion in this documen t is su bject to cha nge.

RAD

LED Traditional Wall Pack

Beyond LED’s RAD wall pack is the newest and feature

rich product of 2021 offering a traditional design for the
innovative LED Technology providing up to 145 lumens
per watt efficacy. It offers three wattages selection with
energy-efficient LED technology and optional
installation accessories including surge-protector,
motion sensor, wire guard, shield, and an emergency
backup. RAD comes with a built-in photocell and is
available in die cast aluminium housings with a
polycarbonate lens to stand up for many years of
punishing environmental conditions.

• Operating temperature: -40°C to 50°C

• Durable die-cast aluminum housing

• Built-in photocell

• Enclosure provides a water-tight seal making it suitable for outdoor application

• Integral LED driver (60W isolated driver and 120W non-isolated driver), eliminates the need for

an external driver or ballast

• Up to 145 lumens per watt

• Three selectable wattage

• Complies with UL safety regulations and is DLC5.1 listed

• High Quality and Efficacy Lumiled 2835 chips

• This product is IP65 rated, therefore, it is waterproof, sealed and gasketed wire

• Universal operation at 120-277Vac 50-60Hz

• Environment friendly with no mercury

• Easy to install and operate, with instant and no humming

• Energy saving, long lifespan

Product Features

[phone] • www.BeyondLEDTechnology.com

Due to continu ous p roduct improve ment, information in thi s docum ent is subjec t to c hange.

Parameter

Description

Value

General
Performance

Input Power

Up to 60W Wattage adjustable
40W /50W /60W

Lumen

Up to 8700LM

Lumen Efficacy

Up to 145LM/W

Color Temperature

5000K

CRI

>80

Beam Angle (50%)
(Tolerance : ±15%)

100 Degree

Electrical

Input Voltage

120-277VAC 50/60Hz

PF

≥0.9

THD

≤20%

Driver Model

HB-LPG060-52

Physical

Driver Surge
protection

L-N: 2kV

Dimming

0-10V dimming standard

Operating
Temperature

-40℃ TO 50℃
Storage Temperature

-40℃ TO 80℃

Operating Humidity

20％ - 90％ RH

Storage Humidity

10％ - 95％ RH

LED Brand

LUMILEDS

LED Type

SMD 2835

LED QTY

225 PCS

Qualification

Housing

Die-cast aluminum

Housing Color

Bronze

Waterproof Rating

WET（IP65）

Warranty Time

5 Years

SKU NUMBER 153459 Specifications

Beyond LED Technology | 1939 Parker Ct, Stone Mountain, GA, 30087

Du e to c ontinuous product improv ement, informat ion in this documen t is su bject to cha nge.

Parameter

Description

Value

General
Performance

Input Power

Up to 120W Wattage adjustable
120W /100W /80W

Lumen

Up to 17400LM

Lumen Efficacy

Up to 145LM/W

Color Temperature

5000K

CRI

>80

Beam Angle (50%)
(Tolerance : ±15%)

100 Degree

Electrical

Input Voltage

120-277VAC 50/60Hz

PF

≥0.9

THD

≤20%

Driver Model

MP-120TG130A

Physical

Driver Surge
protection

L-N: 2kV

Dimming

0-10V dimming standard

Operating
Temperature

-40℃ TO 50℃
Storage Temperature

-40℃ TO 80℃

Operating Humidity

20％ - 90％ RH

Storage Humidity

10％ - 95％ RH

LED Brand

LUMILEDS

LED Type

SMD 2835

LED QTY

420 PCS

Qualification

Housing

Die-cast aluminum

Housing Color

Bronze

Waterproof Rating

WET（IP65）

Warranty Time

5 Years

SKU Number 153462 Specifications

[phone] • www.BeyondLEDTechnology.com

Due to continu ous p roduct improve ment, information in thi s docum ent is subjec t to c hange.

Correlated Colour Temperature (CCT)

Dimensions

Beyond LED Technology | 1939 Parker Ct, Stone Mountain, GA, 30087

Du e to c ontinuous product improv ement, informat ion in this documen t is su bject to cha nge.

Luminaire Data

Voltage: 119.9 V
Current: 0.486 A
Power: 58.12 W
Power Factor: 0.996

SKU Number 153459 Light Distribution Testing Parameters

Photometric Results

[phone] • www.BeyondLEDTechnology.com

Due to continu ous p roduct improve ment, information in thi s docum ent is subjec t to c hange.

Luminaire Data

Voltage: 120.0 V
Current: 1.03 A
Power: 123.54 W
Power Factor: 0.995

SKU Number 153462 Light Distribution Testing Parameters

Photometric Results

Beyond LED Technology | 1939 Parker Ct, Stone Mountain, GA, 30087

Du e to c ontinuous product improv ement, informat ion in this documen t is su bject to cha nge.

1. Be careful to open the carton, contact us if any damage.

2. This product must be installed in accordance with the applicable installation, code by a person familiar
with the construction and operation of the product and the hazards involved.

3. “caution - risk of shock” and “disconnect power before servicing” when photoelectric switch provided.

4. Please check whether the voltage marked on the luminaire is consistent with the input voltage to be
connected, so as not to damage the LED luminaire.

5. To ensure the lifetime of the product, please do not use it in a place with strong acid mist.

6. Make sure the installation position can withstand 10 times the weight of the luminaire before installation
and install it at a flat place without vibration, no swing, no fire hazard.

Caution

➢ Please turn off power before install or change assembly parts.
➢ The input voltage and lamps should be matched, after connecting the power line,

Please make sure the wiring section is insulated.

➢ No-professionals, must not install and disassemble the lamps.

Caution

Notes Before Installation

Notes for Users

[phone] • www.BeyondLEDTechnology.com

Due to continu ous p roduct improve ment, information in thi s docum ent is subjec t to c hange.

Installation Method – 1

Installation Instructions

Beyond LED Technology | 1939 Parker Ct, Stone Mountain, GA, 30087

Du e to c ontinuous product improv ement, informat ion in this documen t is su bject to cha nge.

[phone] • www.BeyondLEDTechnology.com

Due to continu ous p roduct improve ment, information in thi s docum ent is subjec t to c hange.

Installation Method – 2

Beyond LED Technology | 1939 Parker Ct, Stone Mountain, GA, 30087

Du e to c ontinuous product improv ement, informat ion in this documen t is su bject to cha nge.

[phone] • www.BeyondLEDTechnology.com

Due to continu ous p roduct improve ment, information in thi s docum ent is subjec t to c hange.

Troubles

Check points

Flickering of the light

Turn off the power and turn on again in 3 minutes.
If same phenomena occur, then call agencies.

Out of working

Please check the connection.

Wattage adjustable instruction

Turn the wattage adjustable knob to a certain wattage gear, the power of the lamp
will change to the corresponding wattage.

Note: Please turn off the power before adjusting the wattage.

Wiring and Features

Troubleshooting

Beyond LED Technology | 1939 Parker Ct, Stone Mountain, GA, 30087

Du e to c ontinuous product improv ement, informat ion in this documen t is su bject to cha nge.

**Tolerance of Carton Size: ±15 MM, Tolerance of Weight: ±10%.

1. Please do not shake it too much during transportation, handle carefully when unloading.

2. Recommended to be stored in a warehouse of -10~ +60 ℃ and keep the warehouse dry.

Box

Size

Qty / Carton

Net Weight /

Carton

Gross Weight / Carton

Outer Box

16 x 12 x 10

inches

1 PC

7.93 lbs.

10.14 lbs

Application

Packaging

[phone] • www.BeyondLEDTechnology.com

Due to continu ous p roduct improve ment, information in thi s docum ent is subjec t to c hange.

To reduce the risk of death, personal injury or property damage from fire, electric shock, falling parts,
cuts/abrasions, and other hazards read all warnings and instructions included with and on the fixture box
and all fixture labels.
Before installing, servicing, or performing routine maintenance upon this equipment, follow these general
precautions.
Commercial installation, service and maintenance of luminaires should be performed by a qualified licensed
electrician.
For the installation: If you are unsure about the installation or maintenance of the luminaires, consult a
qualified licensed electrician and check your local electrical code.
To prevent wiring damage or abrasion, do not expose wiring to edges of sheet metal or other sharp objects.
Do not make or alter any open holes in an enclosure of wiring or electrical components during kit
installation.

WARNING: RISK OF FIRE OR ELECTRICAL SHOCK
Turn off electrical power at fuse or circuit breaker box before wiring fixture to the power supply.
Turn off the power when you perform any maintenance.
Verify that supply voltage is correct by comparing it with the luminaire label information.
Make all electrical and grounded connections in accordance with the National Electrical Code and any
applicable local code requirements. All wiring connections should be capped with UL approved wire
connectors.

CAUTION: RISK OF INJURY
Avoid direct eye exposure to the light source while it is on.
Account for small parts and destroy packing material, as these may be hazardous to children.

Warranty

5 Years Warranty

Safety Precautions